Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Laboratory for Additive Manufacturing of Precise PartsModule description #51050 / Version 3

← Module page Deutsche Fassung
Module / Version#51050 / #3
ValiditySince Summer semester 2025
Available language(s)English, German
Credit points6
Person responsible for the modulePolte, Julian
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35362200 FG Maschinen und Technologien für die Additive Präzisionsfertigung metallischer Bauteile (MTAP)

Contact

OfficeNot specified
Contact personPolte, Julian
E-mail addresslehre@mtap.tu-berlin.de
Websitehttp://www.tu.berlin/mtap

Learning outcomes

In the project, current challenges in the field of additive manufacturing are analysed, discussed and experimental solutions are developed under supervision. The focus is on the sustainable design of additive manufacturing processes in order to achieve ecological and economic benefits. In addition, technology assessment is used as an integral part of solution development in order to evaluate the potential impact of manufacturing technologies at an early stage. The aim of the project is to gain general knowledge of the analytical and experimental approach to scientific issues in additive manufacturing.

Content

Contemporary issues in the domain of additive manufacturing are examined in conjunction with the students. These include, in particular, the sustainable optimisation of manufacturing processes and the evaluation of technological consequences with regard to ecological and social aspects. In individual presentations, students will analyse the issues and develop strategies to make additive manufacturing economically and ecologically efficient. In collaboration with research assistants, experimental approaches are being developed that pursue both technological and sustainable goals, and these approaches are implemented within the scope of possibilities.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Labor Additive PräzisionsfertigungProject3536 L 709 Winter and summer semester[de]4 ISIS

Workload and credit points

Labor Additive Präzisionsfertigung (Project)

Workload descriptionMultiplierHoursTotal
Attendance154 h60 h
Pre/post processing158 h120 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Approximately 30% of the project time is used to impart knowledge in the form of presentations by the seminar leaders; approximately 30% of the project time is used for presentations by the students and for moderated team discussions. The students work independently on the experiments for around 40% of the project time.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Previous knowledge of CAD.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Collaboration10oralflexible
Presentation20oral15 Min.
Project report70written10 pages max.

Exam description

The performance assessment takes place at the end of the course on the basis of a presentation and a report of a maximum of 10 pages per group participant on the processing and solution of the module task.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 30.

Registration procedures

Registration via the ISIS course.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
SS 20256. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
WS 2025/266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
SS 20266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
WS 2026/276. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
WS 2025/264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
WS 2026/274. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht)
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht)
SS 2026Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht)
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht)
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Produktionstechnik
WS 2025/26Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Produktionstechnik
SS 2026Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Produktionstechnik
WS 2026/27Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Produktionstechnik
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Produktion
WS 2025/26Wahlpflichtmodule › Profilmodule › Produktion
SS 2026Wahlpflichtmodule › Profilmodule › Produktion
WS 2026/27Wahlpflichtmodule › Profilmodule › Produktion
Production Engineering
StuPO 2018 (09.05.2018)
SS 20255. Projekt
WS 2025/265. Projekt
SS 20265. Projekt
WS 2026/275. Projekt
Transport Systems
StuPO 2018
SS 2025A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
WS 2025/26A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
SS 2026A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
WS 2026/27A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen

Miscellaneous

Not specified