Aeroelasticity IIModule description #51091 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #51091 / #2 |
|---|---|
| Validity | Since Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Krüger, Wolf |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Luft- und Raumfahrt |
| Academic chair | 35341400 FG Flugmechanik und Flugregelung |
Contact
| Office | Not specified |
|---|---|
| Contact person | Gonzalez Ramirez, Pedro Jose |
| E-mail address | p.gonzalez.ramirez@tu-berllin.de |
| Website | http://tu.berlin/fmra |
Learning outcomes
After successfully completing the Aeroelastics module, students will have:
Knowledge:
- Overview of the variety of aeroelastic problems
- Understanding of the fundamental physical relationships
- of the special requirements of modeling aircraft in multi-body simulation
- of numerical integration methods
Skills:
- Analytical treatment of aeroelastic problems
- Aeroelastic modeling of the aircraft and its components
- Dynamic analysis in multibody dynamics
Competence in
- critical analysis of aeroelastic problems in aircraft
- Real-time modeling of elastic assemblies for dynamic analysis
Knowledge:
- Overview of the variety of aeroelastic problems
- Understanding of the fundamental physical relationships
- of the special requirements of modeling aircraft in multi-body simulation
- of numerical integration methods
Skills:
- Analytical treatment of aeroelastic problems
- Aeroelastic modeling of the aircraft and its components
- Dynamic analysis in multibody dynamics
Competence in
- critical analysis of aeroelastic problems in aircraft
- Real-time modeling of elastic assemblies for dynamic analysis
Content
Aeroelasticity II:
In modern aircraft, the elasticity of the structure is having an ever greater influence on flight behavior. Elasticity must therefore be taken into account in all relevant disciplines such as flight mechanics and flight control or aerodynamics. In many areas, the simulation of the flying aircraft is an important design tool. Multibody dynamics is a suitable tool for modeling the elastic, flying aircraft. This type of modeling is used in various application areas, e.g. in the design phase of aircraft, in the analysis of loads due to landing impact and roll as well as in flight mechanics. Multibody simulation is also a suitable analysis tool for the simulation of helicopters.
Lecture:
- Modeling of the aircraft and its components in multibody simulation,
- Numerical methods for solving equations of motion,
- Modeling requirements for real-time simulation,
- Examples of load analysis on flying, elastic aircraft.
Load analysis of elastic transport aircraft
- The role of load analysis in aircraft design, especially in preliminary design, is explained.
- An integration into aeroelasticity is made and the connection to structural optimization, also in the context of preliminary aircraft design, is presented.
- Hamilton's principle and Lagrange's equations
- Methods for calculating the internal loads and nodal loads of the structure are presented, including the mode shift method and the sum of forces method.
- The simulation models required for the load analysis are presented and discussed with their respective properties.
In modern aircraft, the elasticity of the structure is having an ever greater influence on flight behavior. Elasticity must therefore be taken into account in all relevant disciplines such as flight mechanics and flight control or aerodynamics. In many areas, the simulation of the flying aircraft is an important design tool. Multibody dynamics is a suitable tool for modeling the elastic, flying aircraft. This type of modeling is used in various application areas, e.g. in the design phase of aircraft, in the analysis of loads due to landing impact and roll as well as in flight mechanics. Multibody simulation is also a suitable analysis tool for the simulation of helicopters.
Lecture:
- Modeling of the aircraft and its components in multibody simulation,
- Numerical methods for solving equations of motion,
- Modeling requirements for real-time simulation,
- Examples of load analysis on flying, elastic aircraft.
Load analysis of elastic transport aircraft
- The role of load analysis in aircraft design, especially in preliminary design, is explained.
- An integration into aeroelasticity is made and the connection to structural optimization, also in the context of preliminary aircraft design, is presented.
- Hamilton's principle and Lagrange's equations
- Methods for calculating the internal loads and nodal loads of the structure are presented, including the mode shift method and the sum of forces method.
- The simulation models required for the load analysis are presented and discussed with their respective properties.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Aeroelastik II: Mehrkörperdynamik in der Luftfahrt (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Lastanalyse elastischer Transportflugzeuge (Tutorial)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The theoretical principles are taught in lectures and illustrated with examples.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatory:
- Mechanics (kinematics and dynamics),
- Mathematics (linear algebra, linear differential equations),
- Flight mechanics 1 (flight performance),
- Aerodynamics
- Aeroelasticity I
b) desirable:
- Flight Mechanics 2 (Flight Dynamics),
- Structural Dynamics or Mechanical Vibration Theory and Machine Dynamics,
- Methods of control engineering
- Mechanics (kinematics and dynamics),
- Mathematics (linear algebra, linear differential equations),
- Flight mechanics 1 (flight performance),
- Aerodynamics
- Aeroelasticity I
b) desirable:
- Flight Mechanics 2 (Flight Dynamics),
- Structural Dynamics or Mechanical Vibration Theory and Machine Dynamics,
- Methods of control engineering
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Mündliche Rücksprache | 75 | oral | 20 min |
| Projekt Bericht | 25 | practical | Bearbeitungszeit über das gesamte Semester |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the course:
- for the first lecture
Registration for the examination:
- oral: at the examination office and examiner 1 week in advance,
- The respective registration deadlines can be found in the study regulations.
- for the first lecture
Registration for the examination:
- oral: at the examination office and examiner 1 week in advance,
- The respective registration deadlines can be found in the study regulations.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Wird während der Vorlesungen ausgegeben
Recommended literature
- Försching: Grundlagen der Aeroelastik, Berlin: Springer, 1974
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 3. Profilmodule › 3.5 Flugmechanik |
| WS 2025/26 | 3. Profilmodule › 3.5 Flugmechanik | |
| SS 2026 | 3. Profilmodule › 3.5 Flugmechanik | |
| WS 2026/27 | 3. Profilmodule › 3.5 Flugmechanik |
Miscellaneous
Not specified