Case studies from handling and device technologyModule description #51094 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #51094 / #1 |
|---|---|
| Validity | Since Summer semester 2024 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Dietrich, Franz |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361200 FG Handhabungs- und Montagetechnik |
Contact
| Office | PTZ 2 |
|---|---|
| Contact person | Dietrich, Franz |
| E-mail address | sabine.lange@tu-berlin.de |
| Website | Not specified |
Learning outcomes
In this course, students acquire engineering-specific skills in handling and device technology. Using the learned methods and tools, students can develop and apply various approaches to solving engineering problems. This includes:
- Recognizing and structuring engineering tasks in handling and device technology.
- Assessing and selecting target-oriented mathematically supported solution methods, such as mechanism synthesis, vibration and wave analysis, design of experiments and parameter identification.
- Knowledge of practical engineering aspects in the application of mathematically supported methods in handling and device technology.
- Adapting known methods from handling and device technology and applying the technical understanding learned to new or unknown problems.
- Recognizing and structuring engineering tasks in handling and device technology.
- Assessing and selecting target-oriented mathematically supported solution methods, such as mechanism synthesis, vibration and wave analysis, design of experiments and parameter identification.
- Knowledge of practical engineering aspects in the application of mathematically supported methods in handling and device technology.
- Adapting known methods from handling and device technology and applying the technical understanding learned to new or unknown problems.
Content
The seminar will focus on case studies and practical applications on the following topics:
- Design of mechanisms, including structural and dimensional synthesis, differential kinematics and dynamics
- Vibration and wave analysis
- Fourier analysis and synthesis
- Modeling and parameter identification, including model structure formation and design of experiments
- Parameter estimation, including optimization methods, direct and indirect methods, and learning methods
- Sensor data processing, including calibration of sensors, multi-sensor fusion and application of independent component analysis (ICA) methods
In addition, your career prospects and attractive job markets in the field of handling and device technology will be discussed.
- Design of mechanisms, including structural and dimensional synthesis, differential kinematics and dynamics
- Vibration and wave analysis
- Fourier analysis and synthesis
- Modeling and parameter identification, including model structure formation and design of experiments
- Parameter estimation, including optimization methods, direct and indirect methods, and learning methods
- Sensor data processing, including calibration of sensors, multi-sensor fusion and application of independent component analysis (ICA) methods
In addition, your career prospects and attractive job markets in the field of handling and device technology will be discussed.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Fallstudien aus der Handhabungs- und Gerätetechnik | Seminar | Summer semester | [de] | 2 | ISIS |
Workload and credit points
Fallstudien aus der Handhabungs- und Gerätetechnik (Seminar)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation and follow-up time | 15 | 4 h | 60 h |
| 90 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Term papers and presentation | 5 | 18 h | 90 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The seminar is designed to explore engineering mathematical methods of handling and device technology.
Relevant literature is provided in preparation for the weekly topic of the seminar, including a task or question.
Attendance time:
- Short lecture by the lecturer as an introduction to the topic
- Workshop or discussion in connection with the task or question set in advance, e.g. application of a method, comparison and discussion of results, significance and applicability/use
- Presentation on the term papers (assessment of other papers, elaboration of the problem, own solution approach, solution)
The preparation and follow-up time is used to work on the term papers to be submitted during the semester and to prepare the presentation:
- Refreshing mathematical basics from the foundation course
- Tasks to specifically expand your own knowledge in self-study using the literature provided
- Interpretation and solution structuring of a previously set task
- Development of a (partial) solution for a previously set task
Relevant literature is provided in preparation for the weekly topic of the seminar, including a task or question.
Attendance time:
- Short lecture by the lecturer as an introduction to the topic
- Workshop or discussion in connection with the task or question set in advance, e.g. application of a method, comparison and discussion of results, significance and applicability/use
- Presentation on the term papers (assessment of other papers, elaboration of the problem, own solution approach, solution)
The preparation and follow-up time is used to work on the term papers to be submitted during the semester and to prepare the presentation:
- Refreshing mathematical basics from the foundation course
- Tasks to specifically expand your own knowledge in self-study using the literature provided
- Interpretation and solution structuring of a previously set task
- Development of a (partial) solution for a previously set task
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
A very good knowledge of German is essential.
Active participation and initiative are required for the seminar.
For Bachelor students: The compulsory modules should have been completed.
Active participation and initiative are required for the seminar.
For Bachelor students: The compulsory modules should have been completed.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Oral examination | 20 | oral | approx. 20 minutes |
| 4 term papers | 60 | flexibel | each approx. 5 pages |
| Presentation | 20 | flexibel | approx. 15 minutes |
Exam description
100 points in total consisting of:
4 assignments worth 15 points each, including a presentation worth 20 points, and 1 oral examination worth 20 points
The prerequisite for participation in the oral examination is the completion of all assignments. Each of the assignments must be passed with at least 50% of the points.
4 assignments worth 15 points each, including a presentation worth 20 points, and 1 oral examination worth 20 points
The prerequisite for participation in the oral examination is the completion of all assignments. Each of the assignments must be passed with at least 50% of the points.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
The module must be registered via Moses or the Examination Office up to one day before the first grading relevant assignment (first term paper or presentation).
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Mechanical Engineering StuPO 2017 | SS 2024 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik |
| WS 2024/25 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| SS 2025 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| WS 2025/26 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| SS 2026 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| WS 2026/27 | Wahlpflichtmodule › Kernmodule › Mikrotechnik und Mechatronik | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 4. Profilmodule › 4.1 Produktionstechnologie |
| WS 2025/26 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| SS 2026 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| WS 2026/27 | 4. Profilmodule › 4.1 Produktionstechnologie |
Miscellaneous
Not specified