Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Disassembly and handling for the circular economyModule description #51095 / Version 1

← Module page Deutsche Fassung
Module / Version#51095 / #1
ValiditySince Summer semester 2024
Available language(s)German
Credit points6
Person responsible for the moduleDietrich, Franz
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361200 FG Handhabungs- und Montagetechnik

Contact

OfficePTZ 2
Contact personDietrich, Franz
E-mail addresssabine.lange@tu-berlin.de
WebsiteNot specified

Learning outcomes

In this course, students acquire engineering-specific skills in assembly technology in connection with disassembly, handling, and circular economy. Students will be able to develop and apply various approaches to solving engineering problems using the methods and tools they have studied. This includes:
- The knowledge and correct use of relevant technical terms, such as dismantling, circular economy, recycling, etc.
- Understanding the systems, technologies and interrelationships of disassembly, handling and recycling in the context of a circular economy
- Understanding unknown issues on the basis of the knowledge acquired and an understanding of the connections between disassembly and the circular economy
- Recognizing and structuring challenges and tasks in disassembly
- Adapting familiar methods of handling and (dis)assembly technology and applying the acquired understanding of the circular economy system to new or unfamiliar problems

Content

The lecture focuses on the following topics:
- Design of technological and manual processes, operating resources in disassembly
- suitability of products for disassembly: Solution approaches and evaluation methods
- Technological challenges and possibilities of disassembly as a process with uncertainties, variable sizes and batch size 1
- "Disassembly is not the reverse of assembly!": structural and technological differences between assembly, disassembly and reassembly
- Relevance of disassembly for the circular economy
- Embedding dismantling in recycling technologies and process chains
- Integration of disassembly into the processes of the circular economy, such as remanufacturing, repair, reuse, etc.
- Contextual aspects for dismantling in a circular economy, such as planning methods, economic efficiency, regulations and standards
- Structures of value creation, related labour markets and personal career prospects in the field of dismantling, maintenance, repair and remanufacturing

In the project-oriented exercise, students from different fields of study work together in groups on relevant research content within subject-specific projects. The project group is supervised by the faculty members of the subject area, while the students are responsible for the planning and implementation of the project content.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Demontage und Handhabung für die KreislaufwirtschaftLecture Summer semester[de]2 ISIS
Demontage und Handhabung für die KreislaufwirtschaftProject Winter and summer semester[de]4 ISIS

Workload and credit points

Demontage und Handhabung für die Kreislaufwirtschaft (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing152 h30 h
60 h

Demontage und Handhabung für die Kreislaufwirtschaft (Project)

Workload descriptionMultiplierHoursTotal
Attendance151 h15 h
Self-managed group work157 h105 h
120 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lecture (VL): The lecture serves to provide theoretical contexts and fundamentals in the form of a frontal lecture. Each lecture unit includes an interactive part in which a multimodal "mini-workshop" supports reflection on the content presented and uses case studies to promote a deeper understanding and clarity of complex issues.

Project exercises (PJ): In the project-oriented exercise, individual aspects of the lecture are explored in greater depth. Discussion of current research work promotes understanding of the lecture content. The projects are worked on in groups consisting of 4-8 students from different fields of study and areas of expertise.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Active participation and the initiative to take part in the "mini-workshop" are required for the lecture.
Practical solutions and results are developed in the projects, so basic knowledge of production technology, data utilization, programming or design is an advantage.
A very good knowledge of German is essential for the project work. Alternatively, English-language projects can be chosen for which a very good knowledge of English is required.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Exam - disassembly and handling for the circular economy100written45 Minuten
Recorded practical performance in the project200flexibelca. 15 Seiten Bericht, ca. 25 Minuten Präsentation

Exam description

This exam uses its own grading scale.
Total number of points to be achieved: 300
285,0 bis 300,0 Points ..... 1,0
270,0 bis 284,9 Points ..... 1,3
255,0 bis 269,9 Points ..... 1,7
240,0 bis 254,9 Points ..... 2,0
225,0 bis 239,9 Points ..... 2,3
210,0 bis 224,9 Points ..... 2,7
195,0 bis 209,9 Points ..... 3,0
180,0 bis 194,9 Points ..... 3,3
165,0 bis 179,9 Points ..... 3,7
150,0 bis 164,9 Points ..... 4,0
0,0 bis 149,9 Points ........ 5,0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

The module must be registered for within the first 6 weeks of the lecture period via Moses or the examination office.

To participate in the written examination - as proof of performance for the compulsory course "Dismantling and Handling for the Circular Economy (VL)", students must register and select the examination date in the related course on the "ISIS2" platform. The deadline for selecting the examination date will be announced at the beginning of the semester in the first lecture and on ISIS.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2024/25Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Resources
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Sustainable Manufacturing
Mechanical Engineering
StuPO 2017
SS 2024Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
WS 2024/25Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
SS 2025Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
WS 2025/26Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
SS 2026Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
WS 2026/27Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik
Patent Engineering
StuPO 2015
SS 20252.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
WS 2025/262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
SS 20262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
WS 2026/272.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
Production Engineering
StuPO 2018 (09.05.2018)
SS 20254. Profilmodule › 4.1 Produktionstechnologie
WS 2025/264. Profilmodule › 4.1 Produktionstechnologie
SS 20264. Profilmodule › 4.1 Produktionstechnologie
WS 2026/274. Profilmodule › 4.1 Produktionstechnologie

Miscellaneous

Not specified