Technical project management for women in additive manufacturingModule description #51107 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v3)
| Module / Version | #51107 / #2 |
|---|---|
| Validity | Summer semester 2024 – Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Heusler, Franziska Celine |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35362200 FG Maschinen und Technologien für die Additive Präzisionsfertigung metallischer Bauteile (MTAP) |
Contact
| Office | Not specified |
|---|---|
| Contact person | Polte, Julian |
| E-mail address | lehre@mtap.tu-berlin.de |
| Website | http://www.tu.berlin/mtap |
Learning outcomes
The course comprises working in groups, focussing on the joint solution of a task. In the context of this, the participants should organise responsibilities under guidance, taking into account personal strengths and weaknesses. In addition, an entire product development cycle is run through step by step in the course of the group work, taking into account the relevant specifications. This is done with reference to additive manufacturing. Additive manufacturing processes require an application-orientated design of the components, which is based on the respective component requirements. Based on the course content, students learn how to tackle practical tasks in the field of additive manufacturing and how to use the necessary software and manufacturing processes.
Content
This course focuses on group work between female students and engineers from industry and research.
Together and under guidance, the individual groups will develop spare parts along a product development cycle and taking additive manufacturing processes into account. The aim is to design a spare part in such a way that it is suitable for real-life use and can withstand the operating conditions. As part of the module, current tasks relating to additive manufacturing are worked on, discussed and presented in groups. As part of the module, technical content relating to additive manufacturing will be taught in a way that is as practical as possible, and topics relating to project management and product development will also be covered. In the course of working together on the module task, the aim is also to create a network of all participants.
Together and under guidance, the individual groups will develop spare parts along a product development cycle and taking additive manufacturing processes into account. The aim is to design a spare part in such a way that it is suitable for real-life use and can withstand the operating conditions. As part of the module, current tasks relating to additive manufacturing are worked on, discussed and presented in groups. As part of the module, technical content relating to additive manufacturing will be taught in a way that is as practical as possible, and topics relating to project management and product development will also be covered. In the course of working together on the module task, the aim is also to create a network of all participants.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Technische Projektleitung für Frauen in der Additiven Fertigung | Project | 3536 L 716 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Technische Projektleitung für Frauen in der Additiven Fertigung (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 6 | 8 h | 48 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 168 h | |||
The workload of the module adds up to 168 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Das Modul wird im Sommersemester zum Ende der vorlesungsfreien Zeit als 1-wöchiges Blockmodul angeboten.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Vorkenntnisse im Bereich CAD - nicht zwingend erforderlich.
Es sind keine Vorkenntnisse im Bereich der Additiven Fertigung/3D-Druck notwendig.
Es sind keine Vorkenntnisse im Bereich der Additiven Fertigung/3D-Druck notwendig.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Praktische Modulaufgabe | 50 | practical | 80 h |
| Präsentation | 50 | oral | 20 Min. |
Exam description
Die Leistungsbeurteilung findet einige Wochen nach der Blockveranstaltung anhand einer Präsentation zu der Modulaufgabe und der Lösung zur praktischen Aufgabe statt. Der Termin für die Prüfung wird in der Lehrveranstaltung festgelegt.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 12.
Registration procedures
Die Anmeldung erfolgt durch das Einschreiben in den ISIS Kurs.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified