Circular product and process systemsModule description #51164 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #51164 / #1 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Bold, Jörg |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361100 FG Werkzeugmaschinen und Fertigungstechnik |
Contact
| Office | PTZ 1 |
|---|---|
| Contact person | Büttner, Laura Marie |
| E-mail address | l.buettner@tu-berlin.de |
| Website | Not specified |
Learning outcomes
After successfully completing the course unit, students should be able to:
1. select different approaches for developing sustainable products in a solution-oriented manner.
2. identify and apply methodical solution approaches for developing sustainable products for new and re-designs.
3. evaluate products over the entire life cycle with regard to their environmental impact and design them in an environmentally compatible manner.
4. determine necessary organizational and procedural processes in development projects.
5. evaluate the potential of information technology solutions for the development of sustainable products.
1. select different approaches for developing sustainable products in a solution-oriented manner.
2. identify and apply methodical solution approaches for developing sustainable products for new and re-designs.
3. evaluate products over the entire life cycle with regard to their environmental impact and design them in an environmentally compatible manner.
4. determine necessary organizational and procedural processes in development projects.
5. evaluate the potential of information technology solutions for the development of sustainable products.
Content
Lectures: In the lectures, the special importance of the development phase for sustainable products over their entire life cycle is elaborated. Solutions at the methodological, organizational and information technology levels are demonstrated and their possible applications are taught using various examples. The lectures include the following topics:
1. sustainable development over the entire product life cycle.
2. DfX (Design for X) for development of sustainable products
3. tools and databases for Life Cycle Assessment (LCA)
4. design dependencies: relationships between design parameters and sustainability impacts
5. data-based approaches
6. digital twins for the development of sustainable products
7. contribution of product development to the circular economy
Exercises: Students are divided into groups at the beginning of the semester. The groups are given individual tasks to re-design an existing product. After a kick-off, regular design reviews take place. At the end, the groups present their results to each other in a final event. The procedure is as follows:
1. introduction: group division and task
2. design review #1: sustainability concept
3. design review #2: system design
4. design review #3: component list with social and environmental impacts
5. design review #4: design dependencies
6. design review #5: product design
7. final presentation
Lectures 2 to 6 and exercises 2 to 6 will be held remotely.
1. sustainable development over the entire product life cycle.
2. DfX (Design for X) for development of sustainable products
3. tools and databases for Life Cycle Assessment (LCA)
4. design dependencies: relationships between design parameters and sustainability impacts
5. data-based approaches
6. digital twins for the development of sustainable products
7. contribution of product development to the circular economy
Exercises: Students are divided into groups at the beginning of the semester. The groups are given individual tasks to re-design an existing product. After a kick-off, regular design reviews take place. At the end, the groups present their results to each other in a final event. The procedure is as follows:
1. introduction: group division and task
2. design review #1: sustainability concept
3. design review #2: system design
4. design review #3: component list with social and environmental impacts
5. design review #4: design dependencies
6. design review #5: product design
7. final presentation
Lectures 2 to 6 and exercises 2 to 6 will be held remotely.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Kreislauffähige Produkt- und Prozesssysteme | Integrated course | Winter and summer semester | [de] | 4 | ISIS |
Workload and credit points
Kreislauffähige Produkt- und Prozesssysteme (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Lectures | 15 | 2 h | 30 h |
| Exercise | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
In a weekly rhythm a lecture with a corresponding exercise takes place. In the lectures, special knowledge on the respective topic is taught. In the practical exercise, this knowledge is directly applied to a semester project on the topic of "sustainable re-design" of a self-selected product.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| lecture exam / oral examination | 50 | flexibel | 60 minutes / 30 minutes |
| Final presentation for the exercises | 50 | oral | 30 minutes |
Exam description
Written or oral examination possible.
The module grade is calculated according to the following grading scale:
95.0 to 100.0 points ... 1.0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
The module grade is calculated according to the following grading scale:
95.0 to 100.0 points ... 1.0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Module registration takes place via ISIS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Production Engineering StuPO 2018 (09.05.2018) | WS 2025/26 | 4. Profilmodule › 4.1 Produktionstechnologie |
| SS 2026 | 4. Profilmodule › 4.1 Produktionstechnologie | |
| WS 2026/27 | 4. Profilmodule › 4.1 Produktionstechnologie |
Miscellaneous
Not specified