Hands-on Stability: Experiments and SimulationModule description #51202 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #51202 / #1 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Ou, Yating |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35374100 FG Mechanik insbesondere Stabilität und Versagen funktionsoptimierter Strukturen |
Contact
| Office | MS 2 |
|---|---|
| Contact person | Ou, Yating |
| E-mail address | y.ou@tu-berlin.de |
| Website | https://www.tu.berlin/svfs/ |
Learning outcomes
Upon completion of the module, students will be able to:
* understand the fundamentals of elastic stability
* apply mechanical models to typical stability phenomena
* independently plan, conduct, and evaluate experiments
* interpret measurement data and compare them with simulation results
* understand the scientific workflow
* present the results in a post
* present the results in a structured (short) scientific paper
* understand the fundamentals of elastic stability
* apply mechanical models to typical stability phenomena
* independently plan, conduct, and evaluate experiments
* interpret measurement data and compare them with simulation results
* understand the scientific workflow
* present the results in a post
* present the results in a structured (short) scientific paper
Content
This module covers the following main contents, based on the "Make-Break-Simulate" methodological three-tone of the chair:
Theoretical foundations:
* Fundamentals of elastic stability
* Reduced-degree-of-freedom surrogate models / discrete models
* Theory according to Thompson and Hunt
* Discussion of typical stability phenomena
Experiments:
* Setup and adjustment of the testing machine
* Data acquisition using the testing machine and Digital Image Correlation (DIC)
* Processing and evaluation of experimental data with open source tools
* Preparation and application of a test protocol
Simulation:
* Introduction to the open-source bifurcation tool Pyfurc
* Basic introduction to Python for mechanical problems
* Concrete simulation of typical stability problems
* Reflection on the results and comparison with experimental data
Provided materials and support:
* Pre-fabricated 3D-printed specimens produced by material extrusion additive manufacturing (MEX-AM)
* Prepared Python code for Pyfurc
Theoretical foundations:
* Fundamentals of elastic stability
* Reduced-degree-of-freedom surrogate models / discrete models
* Theory according to Thompson and Hunt
* Discussion of typical stability phenomena
Experiments:
* Setup and adjustment of the testing machine
* Data acquisition using the testing machine and Digital Image Correlation (DIC)
* Processing and evaluation of experimental data with open source tools
* Preparation and application of a test protocol
Simulation:
* Introduction to the open-source bifurcation tool Pyfurc
* Basic introduction to Python for mechanical problems
* Concrete simulation of typical stability problems
* Reflection on the results and comparison with experimental data
Provided materials and support:
* Pre-fabricated 3D-printed specimens produced by material extrusion additive manufacturing (MEX-AM)
* Prepared Python code for Pyfurc
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Hands-on Stabilität: Experimente und Simulation | Project | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Hands-on Stabilität: Experimente und Simulation (Project) 1
- Hands-on Stabilität: Experimente und Simulation (Projekt) Termingruppe 1
Workload and credit points
Hands-on Stabilität: Experimente und Simulation (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
* Interactive and participatory design of the course
* Collaborative development of the contents within the framework of blended learning and research-based learning
* Encouragement of independent topics and problem statements developed by the participants
* Individual supervision during the working phases
* Intermediate presentation for reflecting on findings and clarifying objectives
The teaching and learning methods include presentations, exercises, group discussions, and independent work in small groups of up to five participants.
* Collaborative development of the contents within the framework of blended learning and research-based learning
* Encouragement of independent topics and problem statements developed by the participants
* Individual supervision during the working phases
* Intermediate presentation for reflecting on findings and clarifying objectives
The teaching and learning methods include presentations, exercises, group discussions, and independent work in small groups of up to five participants.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Desirable prerequisites for participation in the course:
Mechanics I and II, energy methods
Mechanics I and II, energy methods
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| poster presentation | 30 | oral | poster presentation |
| scientific paper | 40 | written | up to 25 pages |
| mid-term presentation | 30 | oral | 10 minute presentation + 5 minutes of Q&A |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
Registration begins after the first session.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Engineering Science StuPO 2020 | WS 2026/27 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Profilmodule › Werkstoffe |
Miscellaneous
Not specified