Structural Analysis IIIModule description #60173 / Version 6
- 6 CP
- Written exam
- Graded
- Summer semester
- German
| Module / Version | #60173 / #6 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Huhnt, Wolfgang |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät VI |
|---|---|
| Institute | Institut für Bauingenieurwesen |
| Academic chair | 36311200 FG Statik und Entwerfen der Baukonstruktionen |
Contact
| Office | TIB 1-B 5 |
|---|---|
| Contact person | Bretzke, Alexandra |
| E-mail address | info@statik.tu-berlin.de |
| Website | http://www.statik.tu-berlin.de |
Learning outcomes
Students are able to apply nonlinear methods for the static analysis of load-bearing structures. They can apply the fundamental theoretical principles as well as practical examples to analyse framed structures according to second-order theory and plastic hinge theory, and to determine the ultimate load in the failure state. Future engineers thereby acquire the ability to correctly interpret geometrically and materially nonlinear structural behaviour, including stability phenomena, and to critically assess the results of nonlinear static analyses.
Content
Failure states of framed structures are discussed, and based on these, the formulation of stress-related as well as stability-related problems in structural analysis is derived. The fundamental equations of beam theory according to second-order theory are derived, and manual calculations within the framework of the displacement method for geometrically nonlinear problems are taught, in particular the determination of buckling loads and buckling modes of framed structures using the slope-deflection method.
Using plastic hinge theory, the influence of inelastic material behaviour on the load-bearing capacity of framed structures is captured, and the manual nonlinear analysis of ultimate loads is taught through the application of the theorems of plastic collapse and the method of incremental load application. The determination of the moment-curvature relationship for rectangular cross-sections of reinforced concrete beams is explained, and its application to ultimate load analysis is taught. Subsequently, the fundamentals of the computer-oriented displacement method are explained and exemplarily applied using the direct stiffness method for framed structures.
Using plastic hinge theory, the influence of inelastic material behaviour on the load-bearing capacity of framed structures is captured, and the manual nonlinear analysis of ultimate loads is taught through the application of the theorems of plastic collapse and the method of incremental load application. The determination of the moment-curvature relationship for rectangular cross-sections of reinforced concrete beams is explained, and its application to ultimate load analysis is taught. Subsequently, the fundamentals of the computer-oriented displacement method are explained and exemplarily applied using the direct stiffness method for framed structures.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Baustatik III (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Baustatik III (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| exam preparation | 1 | 60 h | 60 h |
| 60 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The content is presented in lectures and consolidated in exercises. Independent preparation and review of the learning material is essential.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Completed Bachelor's module "Structural Analysis II"
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 120 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the exam is carried out via the Moses MTS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – lecture notes and exercise materials in ISIS
Recommended literature
- siehe Vorlesungsunterlagen im ISIS-System
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Civil Engineering Civil Engineering (B. Sc.) - StuPO 2015 (1. Änderung 2018) | WS 2026/27 | Wahlpflichtbereich - Variable Bauingenieurmodule |
| Civil Engineering Civil Engineering (B. Sc.) - StuPO 2025 | WS 2026/27 | Wahlpflichtbereich › Profillinie Konstruktiver Ingenieurbau |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Bauingenieurwesen/Civil Engineering (BI) › Bauingenieurwesen/Civil Engineering (Wahlpflicht/Compulsory-Elective) |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Civil Engineering › Structural Design |
Miscellaneous
Not specified