Bridge Engineering IModule description #60513 / Version 5
- 6 CP
- Written exam
- Graded
- Summer semester
- German
| Module / Version | #60513 / #5 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Geißler, Karsten |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät VI |
|---|---|
| Institute | Institut für Bauingenieurwesen |
| Academic chair | 36311500 FG Entwerfen und Konstruieren - Stahlbau |
Contact
| Office | TIB 1-B 1 |
|---|---|
| Contact person | Geißler, Karsten |
| E-mail address | ek-stahlbau@tu-berlin.de |
| Website | https://www.tu.berlin/ek-stahlbau |
Learning outcomes
Students are familiar with the design of bridges using a variety of materials. After an introduction to the planning of road and railway bridges, they are able to analyze the various types of bridges in terms of load-bearing behavior, service life, resource efficiency, and construction method, and to derive sustainable design solutions and construction decisions from this analysis.
Furthermore, after the second part of the course, they are able to perform in-depth calculations, dimensioning, and structural design of solid bridges with an emphasis on prestressed structures. This is underlined by a solid bridge that they have calculated and designed themselves.
Furthermore, after the second part of the course, they are able to perform in-depth calculations, dimensioning, and structural design of solid bridges with an emphasis on prestressed structures. This is underlined by a solid bridge that they have calculated and designed themselves.
Content
This module introduces structural design concepts for bridge construction and thus also serves as preparation for the bridge construction design seminar at the end of the program. The second part of the course focuses on the calculation, dimensioning, and construction of solid bridges. In the third part of the course, students work on a term paper on the calculation and dimensioning of a simple prestressed concrete bridge. The following topics are covered in detail:
- Fundamentals of the design and structural engineering of road and railway bridges, in particular the support systems and cross-section design,
- Introduction to the essential fundamentals of structural design for various types of bridges, such as beam, truss, arch, and cable-stayed structures,
- Background information on the normative rules for loads, including load models and safety concepts,
- In-depth design of the supporting structure and cross-section of solid bridges,
- Dimensioning of prestressing, taking into account time-dependent losses,
- Calculation, dimensioning, and construction of the main supporting elements of concrete and prestressed concrete bridges in the ultimate and serviceability limit state as well as fatigue,
- To reflect on the process of designing, constructing, and dimensioning solid bridges, students independently work on a simple two-span prestressed concrete bridge up to the planning depth of a completed design plan, including design statics (assignment, not graded).
- Fundamentals of the design and structural engineering of road and railway bridges, in particular the support systems and cross-section design,
- Introduction to the essential fundamentals of structural design for various types of bridges, such as beam, truss, arch, and cable-stayed structures,
- Background information on the normative rules for loads, including load models and safety concepts,
- In-depth design of the supporting structure and cross-section of solid bridges,
- Dimensioning of prestressing, taking into account time-dependent losses,
- Calculation, dimensioning, and construction of the main supporting elements of concrete and prestressed concrete bridges in the ultimate and serviceability limit state as well as fatigue,
- To reflect on the process of designing, constructing, and dimensioning solid bridges, students independently work on a simple two-span prestressed concrete bridge up to the planning depth of a completed design plan, including design statics (assignment, not graded).
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Brückenbau I | Integrated course | Summer semester | – | 4 | ISIS |
Workload and credit points
Brückenbau I (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Exam preparations | 1 | 60 h | 60 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The course formats lecture, for theoretical teaching, and exercise, for practical application, alternate without any fixed schedule.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Konstruktiver Ingenieurbau III
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 90 minutes |
Exam description
The exam consists of a written test.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the exam takes place at the relevant office of the central university administration, usually via the electronic registration system.
Dates will be announced at the beginning of the module. For Erasmus students: Registration at the department.
Dates will be announced at the beginning of the module. For Erasmus students: Registration at the department.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Civil Engineering Civil Engineering (M. Sc.) - StuPO 2017 (18.01.2017) | SS 2026 | Wahlpflichtbereich › Vertiefungsrichtungen › Vertiefungsrichtung Entwerfen und Konstruieren |
| WS 2026/27 | Wahlpflichtbereich › Vertiefungsrichtungen › Vertiefungsrichtung Verkehrswesen/Infrastruktur | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Bauingenieurwesen/Civil Engineering (BI) › Bauingenieurwesen/Civil Engineering (Wahlpflicht/Compulsory-Elective) › Structural Design |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Bauingenieurwesen/Civil Engineering (BI) › Bauingenieurwesen/Civil Engineering (Wahlpflicht/Compulsory-Elective) › Structural Design | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Civil Engineering › Structural Design |
Miscellaneous
Not specified