Additive manufacturing in civil engineering - concrete canoe 2Module description #61262 / Version 2
- 6 CP
- No exam
- Ungraded
- Summer semester
- German
| Module / Version | #61262 / #2 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Lehmann, Christian |
| Grading | Ungraded |
| Exam format | No exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät VI |
|---|---|
| Institute | Institut für Bauingenieurwesen |
| Academic chair | 36311300 FG Baustoffe und Bauchemie |
Contact
| Office | Not specified |
|---|---|
| Contact person | Lehmann, Christian |
| E-mail address | c.lehmann@tu-berlin.de |
| Website | http://www.baustoffe.tu-berlin.de |
Learning outcomes
As part of a current project, students learn about additive manufacturing in construction. The theoretical foundations are developed independently by the students and presented and discussed in seminar presentations. In line with the project focus, particular emphasis is placed on the sustainable use of available resources (cements, supplementary cementitious materials, admixtures, cement substitutes, recyclability, etc.).
The primary focus lies on optimizing a high-performance concrete mix for additive manufacturing (strength, durability, workability, etc.). In practical laboratory work, the theoretically developed mix designs are further refined and tested for workability. Specimens are produced, among other purposes, for the determination of strength in accordance with DIN EN 196. Students learn how to apply a 3D printing mix and the fundamental principles for its evaluation in accordance with DIN EN 196. Potential post-processing techniques (e.g., autoclaving, heat treatment, etc.) are also discussed and, where possible, applied.
Following successful optimization of the mix design, a 3D-printed prototype is produced. Here, too, particular emphasis is placed on the sustainable use of resources (lost formwork, material consumption, material selection, etc.). Collaboration with locally based companies specializing in additive manufacturing is also incorporated. Students acquire the ability to apply concrete shaping (production/execution) in conjunction with additive manufacturing.
The course concludes with the fabrication of components and their assembly into a project-specific structural unit. Students are able to critically evaluate and compare the ecological and economic aspects of additive manufacturing in construction. Optionally, project-specific participation in competitions-such as the German Concrete Canoe Regatta-is possible.
Competency distribution:
Subject-specific competence: 20%
Methodological competence: 50%
Systems competence: 15%
Social competence: 15%
The primary focus lies on optimizing a high-performance concrete mix for additive manufacturing (strength, durability, workability, etc.). In practical laboratory work, the theoretically developed mix designs are further refined and tested for workability. Specimens are produced, among other purposes, for the determination of strength in accordance with DIN EN 196. Students learn how to apply a 3D printing mix and the fundamental principles for its evaluation in accordance with DIN EN 196. Potential post-processing techniques (e.g., autoclaving, heat treatment, etc.) are also discussed and, where possible, applied.
Following successful optimization of the mix design, a 3D-printed prototype is produced. Here, too, particular emphasis is placed on the sustainable use of resources (lost formwork, material consumption, material selection, etc.). Collaboration with locally based companies specializing in additive manufacturing is also incorporated. Students acquire the ability to apply concrete shaping (production/execution) in conjunction with additive manufacturing.
The course concludes with the fabrication of components and their assembly into a project-specific structural unit. Students are able to critically evaluate and compare the ecological and economic aspects of additive manufacturing in construction. Optionally, project-specific participation in competitions-such as the German Concrete Canoe Regatta-is possible.
Competency distribution:
Subject-specific competence: 20%
Methodological competence: 50%
Systems competence: 15%
Social competence: 15%
Content
Students are expected to optimize project-specific concrete mixes and shape them according to the selected project. To this end, investigations are carried out on the raw materials as well as on the concrete mixes themselves. The testing methods applied are based on DIN EN 196. Shaping and form-finding constitute another key component of this course.
Selected course topics:
Fundamental research on the applications of additive manufacturing methods, their properties, and presentation of the findings
Additive manufacturing in construction using mortars
Model development and G-code generation using an experimental 3D printer
Production of project-specific components and structural assemblies
Selected course topics:
Fundamental research on the applications of additive manufacturing methods, their properties, and presentation of the findings
Additive manufacturing in construction using mortars
Model development and G-code generation using an experimental 3D printer
Production of project-specific components and structural assemblies
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Praktische Anwendungen von UHPC | Integrated course | Winter and summer semester | [de] | 4 | ISIS |
Workload and credit points
Praktische Anwendungen von UHPC (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Preparation of a written report documenting the practical work. | 1 | 30 h | 30 h |
| Present time | 18 | 5 h | 90 h |
| Independent study of the subject matter. | 1 | 30 h | 30 h |
| 150 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Presentation | 1 | 30 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The content to be conveyed is presented in seminars and applied in practical laboratory work. The independent implementation of the investigative methods is further developed and reinforced during the laboratory practicals.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Ungraded |
|---|---|
| Exam format | No exam |
Exam description
To obtain a certificate of achievement, a minimum attendance of 90 hours is required. In addition, a presentation of approximately 20 minutes on a topic relevant to the course must be delivered. The overall workload also includes time allocated for preparation and follow-up work.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 30.
Registration procedures
Registration for the module takes place online at the beginning of the course. Participation in the laboratory practicals requires personal attendance at the safety briefing, which is conducted once at the start of the course.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable – Unterlagen zur Veranstaltung werden über ISIS zur VErfügung gestellt.
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified