Introduction to systems and process engineeringModule description #30090 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #30090 / #7 |
|---|---|
| Validity | WS 2019/20 – Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Geißen, Sven-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Technischen Umweltschutz |
| Academic chair | 33331100 FG Umweltverfahrenstechnik |
Contact
| Office | KF 2 |
|---|---|
| Contact person | Not specified |
| E-mail address | sven.geissen@tu-berlin.de |
| Website | http://www.uvt.tu-berlin.de |
Learning outcomes
The students should:
- Have knowledge of basic process description and analysis
- Evaluate and optimize production processes or environmental processes respective their systems engineering and design elements
- Elaborate an efficient technical and economic evaluation of processes in lab-, pilot- and industrial scale
- Interprete and analyze secondary targets of professional Teamwork as well as presenting and defending their results
The course imparts:
20 % knowledge and understanding, 20 % analysis and methods, 10 % engineering and design,
20 % research and evaluation, 20 % practical application, 10 % social competence
- Have knowledge of basic process description and analysis
- Evaluate and optimize production processes or environmental processes respective their systems engineering and design elements
- Elaborate an efficient technical and economic evaluation of processes in lab-, pilot- and industrial scale
- Interprete and analyze secondary targets of professional Teamwork as well as presenting and defending their results
The course imparts:
20 % knowledge and understanding, 20 % analysis and methods, 10 % engineering and design,
20 % research and evaluation, 20 % practical application, 10 % social competence
Content
- Definition and design of environmentally relevant processes along an example production process (e.g. paper, food, textile Industry)
- Degrees of freedom within process engineering elements and systems
- Planning of process technology Systems from project draft up to detail drawing
- Technical and projecting process technology
- Design elements, design tools and elementary process development
- Modelling and optimization of process technology systems
- Specific exercise related to the lecture
- Seminar for elaborating the description and evaluation of environmentally relevant production processes
- Degrees of freedom within process engineering elements and systems
- Planning of process technology Systems from project draft up to detail drawing
- Technical and projecting process technology
- Design elements, design tools and elementary process development
- Modelling and optimization of process technology systems
- Specific exercise related to the lecture
- Seminar for elaborating the description and evaluation of environmentally relevant production processes
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Einführung in die Anlagen- und Prozesstechnik (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 3 h | 45 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 105 h | |||
Einführung in die Anlagen- und Prozesstechnik (Seminar)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 5 | 3 h | 15 h |
| Vor-/Nachbereitung | 5 | 6 h | 30 h |
| 45 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfungsvorbereitung | 15 | 2 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
As an integrated course this module comprises the components lecture, exercise and seminar.
The procuration of theoretical knowledge is complemented by exercises that refer specifically to the needs of the degree program.
The application of the learned knowledge is practiced in within a seminar (TAP category 1) with an extent of 1SWS.
The exercises are processed and presented within small groups of max. six students.
The procuration of theoretical knowledge is complemented by exercises that refer specifically to the needs of the degree program.
The application of the learned knowledge is practiced in within a seminar (TAP category 1) with an extent of 1SWS.
The exercises are processed and presented within small groups of max. six students.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Internship | 15 | practical | 10 Seiten |
| Schriftliche Leitungskontrolle | 65 | written | 85 min |
| Seminarvortrag Grundfließbild | 10 | oral | 10 min |
| Seminarvortrag Verfahrensfließbild | 10 | oral | 15 min |
Exam description
The portfolio examination consists of the following educational performances that are relevant for evaluation:
- Written examination (duration max. 90min)
- Seminar exercise consisting of :
Presentation of basic flow chart
Presentation of process flow Chart
Practical training (incl. execution and protocol)
Grading scheme:
50% pass mark, 5% grading steps, grade 1.0 from 95% upwards
- Written examination (duration max. 90min)
- Seminar exercise consisting of :
Presentation of basic flow chart
Presentation of process flow Chart
Practical training (incl. execution and protocol)
Grading scheme:
50% pass mark, 5% grading steps, grade 1.0 from 95% upwards
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 60.
Registration procedures
Registration of the portfolio examination takes place in the examination office.
The registration has to be submitted up to one working day before the provision of the first evaluation relevant activity, latest before May 31.
Due to organizational reasons a registration into the participants list via ISIS is required.
The referring password is provided within the first lecture or seminar.
The registration has to be submitted up to one working day before the provision of the first evaluation relevant activity, latest before May 31.
Due to organizational reasons a registration into the participants list via ISIS is required.
The referring password is provided within the first lecture or seminar.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – www.isis.tu-berlin.de/2.0
Recommended literature
- Sattler, K.; Kasper, W.: Verfahrenstechnische Anlagen. Planung, Bau und Betrieb
- weitere Literatur wird zu Beginn der LV bekannt gegeben
- Wilhelm R. A. Vauck, W., Müller, H.: Grundoperationen chemischer Verfahrenstechnik
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Environmental Science and Technology StuPO 2020 | WS 2020/21 | Wahlpflichtbereich › Kernmodule |
| WS 2021/22 | Wahlpflichtbereich › Kernmodule | |
| SS 2022 | Wahlpflichtbereich › Kernmodule | |
| WS 2022/23 | Wahlpflichtbereich › Kernmodule | |
| SS 2023 | Wahlpflichtbereich › Kernmodule | |
| WS 2023/24 | Wahlpflichtbereich › Kernmodule | |
| SS 2024 | Wahlpflichtbereich › Kernmodule | |
| WS 2024/25 | Wahlpflichtbereich › Kernmodule | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2020 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) |
| WS 2020/21 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| SS 2021 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| WS 2021/22 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| SS 2022 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| WS 2022/23 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| SS 2023 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| WS 2023/24 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| SS 2024 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| WS 2024/25 | Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2020 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy |
| WS 2020/21 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| SS 2021 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| WS 2021/22 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| SS 2022 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| WS 2022/23 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| SS 2023 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Resources | |
| WS 2023/24 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| SS 2024 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Climate & Environment | |
| WS 2024/25 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy |
Miscellaneous
Bachelor Environmental Technology
Master Environmental Technology
Master Environmental Technology