Process Modeling LabModule description #30126 / Version 5
- 4 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #30126 / #5 |
|---|---|
| Validity | Summer semester 2023 – Winter semester 2024/25 |
| Available language(s) | English, German |
| Credit points | 4 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Rohde, Niclas |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/praktika-und-projekte/labor-pad |
Learning outcomes
Students:
-have in-depth knowledge of step responses, transfer function, model validation, design of experiments, process dynamics, measurement techniques, process control technology,
-are able to plan, carry out and evaluate experiments and, if necessary, to make modifications to the experimental equipment,
-have knowledge of laboratories, plant operation, calibration of sensors, and interaction of sensors and actuators,
-know and can evaluate approaches for developing optimized solutions and process control concepts,
-have the ability to "think in models".
The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice
-have in-depth knowledge of step responses, transfer function, model validation, design of experiments, process dynamics, measurement techniques, process control technology,
-are able to plan, carry out and evaluate experiments and, if necessary, to make modifications to the experimental equipment,
-have knowledge of laboratories, plant operation, calibration of sensors, and interaction of sensors and actuators,
-know and can evaluate approaches for developing optimized solutions and process control concepts,
-have the ability to "think in models".
The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice
Content
Investigation on test stands:
-continuous and discontinuous distillation
-operation of a mini-plant with modern process control technology
-controller design and process dynamics
-modeling and experimental validation for liquid-liquid separations
Typical tasks :
-realization of a process control concept in the process control system
-Recording of step responses and design as well as test of different controller structures
-Development of a start-up concept for a column
-Modeling, derivation of experimental design, and model validation based on measurements
-continuous and discontinuous distillation
-operation of a mini-plant with modern process control technology
-controller design and process dynamics
-modeling and experimental validation for liquid-liquid separations
Typical tasks :
-realization of a process control concept in the process control system
-Recording of step responses and design as well as test of different controller structures
-Development of a start-up concept for a column
-Modeling, derivation of experimental design, and model validation based on measurements
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| PAD I - Grundlagen | Internship | 0339 L 416 | Winter and summer semester | [en, de] | 2 | WS 2026/27 (1) ISIS |
| PAD II - Vertiefung | Internship | 0339 L 415 | Winter and summer semester | [en, de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
PAD I - Grundlagen (Internship) 1
- PAD I - Grundlagen (Praktikum) Blockveranstaltung Di. 09.03.27- Fr. 12.03.2027, 9-15 Uhr 0339 L 416
PAD II - Vertiefung (Internship) 1
- PAD II - Vertiefung (Praktikum) Blockveranstaltung Mo. 15.03.27- Fr. 19.03.2027, 9-15 Uhr 0339 L 415
Workload and credit points
PAD I - Grundlagen (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Report, Protocol | 15 | 2 h | 30 h |
| Work in presence | 15 | 2 h | 30 h |
| 60 h | |||
PAD II - Vertiefung (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Work in presence | 15 | 2 h | 30 h |
| Report, protocol | 1 | 30 h | 30 h |
| 60 h | |||
The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.
Description of teaching and learning methods
The practical courses are carried out in small groups, whereby the experiments, logging or the solution of the tasks are carried out independently but under supervision. The pilot plants with the associated measurement technology and process control technology are available in the technical center of the department. The necessary software for identification and model developemnt is available in the department's PC pool.
The lab is offered as a block course.
The lab is offered as a block course.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
"Prozess- und Anlagendynamik", "Thermodynamik II" and "Thermische Grundoperationen der Verfahrenstechnik" or equivalent courses strongly recommended. Understanding necessary to perform the work!
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Conduction of experiments | 40 | practical | 24 h |
| Written report | 60 | written | max. 60 pages |
Exam description
Grading of the individual elements as well as the grading scheme will be announced at the beginning of the semester.
Protocols prepared (in groups of 2-3 students each) will be graded. In addition, the experimental work will be evaluated in general and on the basis of oral discussions.
Protocols prepared (in groups of 2-3 students each) will be graded. In addition, the experimental work will be evaluated in general and on the basis of oral discussions.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
The registration of the lab takes place in the examination office or via online examination registration. Registration must take place up to one working day before the first graded element.
Registration for the course at:
https://www.tu.berlin/dbta/studium-lehre/praktika-exkursionen/
The website of the department or ISIS provides information on specific dates of the exam. There is a 5-day attendance period for conducting the experiments. Subsequently, a written report has to be handed in within 4 weeks after the end of the practical part.
Registration for the course at:
https://www.tu.berlin/dbta/studium-lehre/praktika-exkursionen/
The website of the department or ISIS provides information on specific dates of the exam. There is a 5-day attendance period for conducting the experiments. Subsequently, a written report has to be handed in within 4 weeks after the end of the practical part.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – The scripts will be sent to confirmed participants close before the start of the lab course
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Master Energie- und Verfahrenstechnik, Master Regenerative Energiesysteme, Master PEESE
Part of module list „EVT- Wahlpflichtlabor II“
Part of module list „EVT- Wahlpflichtlabor II“
Miscellaneous
In case of high demand, the internship can be offered 2x per semester.
The module can be completed in 2-3 weeks.
The module can be completed in 2-3 weeks.