Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Computer-Aided Process DesignModule description #30492 / Version 6

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v10)
Module / Version#30492 / #6
ValiditySummer semester 2020 – Summer semester 2022
Available language(s)German
Credit points6
Person responsible for the moduleRepke, Jens-Uwe
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351500 FG Dynamik und Betrieb technischer Anlagen

Contact

OfficeKWT 9
Contact personEichler, Philipp Julian
E-mail addresslehre@dbta.tu-berlin.de
Websitehttps://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung

Learning outcomes

The students:

- know how to use tools and methods from computer aided plant design
- are able to create 2D engineering documents and plant models in 3D
- have an overview about conventional cost estimation techniques in process planning
- are motivated to extend the conventional computer aided plant design by their own ideas and new analysis
- are able to work interdisciplinary and responsible
- can work independently and scientificly
- are capable of team work and problem solving expertise

Content

Excercising a compete planning process of an industrial example in team work up to 3 students:

- Introduction to plant design, definitions, examples
- Fundamentals of process simulation and its central role in basic engineering
- Introduction to the Flowsheet Simulator ChemCAD® and adaption for the sample process
- Principles of cost estimation in chemical engineering and calculations for the sample process
- Introduction and generation of Engineering Documents (BFD, PFD, P&ID) based on DIN 28004 with MS Visio and the Add-In PlantEngineer
- Introduction to the basics of detail engineering
- Design and instrumentation of process units
- Introduction and generation of plot plans (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Fundamentals of piping design and isometrics
- 3D modelling of the sample process in E3D from AVEVA™ including piping design
- Automatic 3D equipment generation via MOSAICmodeling

Commercial Software as ChemCAD®, MS Visio, PlantEngineer/X-Visual Technologies, E3D/AVEVA™ are provided in the course.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Computergestützte AnlagenplanungIntegrated course0339 L 419 Winter and summer semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Computergestützte Anlagenplanung (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Computergestützte Anlagenplanung (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance108 h80 h
Preparation, report160 h60 h
Pre- and post-processing140 h40 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

In this course the complete planning process of an industrial example is exercised using the Flowsheet Simulator ChemCAD®, the 2D-Design tool MS Visio with the Add-In PlantEngineer and the 3D-Design tool Everything 3D. Parts of process simulation, functional planning, cost estimation, elevation drafts and piping design will be taught. In groups up to 3 persons the students have to deal with problems as they typically occur in process engineering.

Attention: The course is held in German.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Attended lectures:
- Prozess- und Anlagendynamik
- Thermodynamik
- Thermische Grundoperationen
- Prozesssimulation

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points per element
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Report7written
Discussion3oral45

Exam description

Portfolio exam.
The grading system is explainded by the person in charge of the module at the beginning of the course. A written report about all planning steps of the sample process has to be handed in to this person after the course and at least two weeks before the oral discussion. The oral discussion will take about 1 h and be about lecture content and the own sample process. The total grade for the course results to 70 % from the report and 30 % from the oral discussion. Report and oral discussion are absolved as a team (= students who planned the sample process together). Please contact the person in charge of the module at most one month before you plan to take the oral exam for organisational reasons.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 20.

Registration procedures

The registration as "prüfungsäquivalente Studienleistung" is either done at the Prüfungsamt via "Gelber Zettel" or via QISPOS. The registration has to be done no later than one working day before the report is handed in.

Since the number of participants is restricted, a registration is only possible if there are suifficient capacities. Hence, a registration request is necessary on our homepage www.dbta.tu-berlin.de. One month before the course, a participant list will be sent to the Prüfungsämter. The person in charge of the module will then inform all participants that they can from then on register for the exam at the Prüfungsamt.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – https://www.isis.tu-berlin.de

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Chemical Engineering
MSc_ChemIng_2020
WS 2020/21Wahlpflichtmodule › Prozesstechnik
SS 2021Wahlpflichtmodule › Prozesstechnik
WS 2021/22Wahlpflichtmodule › Prozesstechnik
SS 2022Wahlpflichtmodule › Prozesstechnik
WS 2022/23Wahlpflichtmodule › Prozesstechnik
Master Energie- und Verfahrenstechnik (Bestandteil der Wahlpflichtliste „Rechnergestützte Methoden“), Master Process Energy Environmental Systems Engineering (Bestandteil der Wahlpflichtliste „Prozesssimulation“), Master Chemieingenieurwesen, Master Wirtschaftsingenieurwesen, Master Regenerative Energiesysteme

Miscellaneous

Not specified