Computer-Aided Process DesignModule description #30492 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v10)
| Module / Version | #30492 / #7 |
|---|---|
| Validity | Winter semester 2022/23 – Summer semester 2023 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Eichler, Philipp Julian |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung |
Learning outcomes
The students:
- know how to use tools and methods from computer aided plant design
- are able to create 2D engineering documents and plant models in 3D
- have an overview about conventional cost estimation techniques in process planning
- are motivated to extend the conventional computer aided plant design by their own ideas and new analysis
- are able to work interdisciplinary and responsible
- can work independently and scientificly
- are capable of team work and problem solving expertise
- know how to use tools and methods from computer aided plant design
- are able to create 2D engineering documents and plant models in 3D
- have an overview about conventional cost estimation techniques in process planning
- are motivated to extend the conventional computer aided plant design by their own ideas and new analysis
- are able to work interdisciplinary and responsible
- can work independently and scientificly
- are capable of team work and problem solving expertise
Content
Excercising a compete planning process of an industrial example in team work up to 3 students:
- Introduction to plant design, definitions, examples
- Fundamentals of process simulation and its central role in basic engineering
- Introduction to the Flowsheet Simulator ChemCAD® and adaption for the sample process
- Principles of cost estimation in chemical engineering and calculations for the sample process
- Introduction and generation of Engineering Documents (BFD, PFD, P&ID) based on DIN 28004 with MS Visio and the Add-In PlantEngineer
- Introduction to the basics of detail engineering
- Design and instrumentation of process units
- Introduction and generation of plot plans (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Fundamentals of piping design and isometrics
- 3D modelling of the sample process in E3D from AVEVA™ including piping design
- Automatic 3D equipment generation via MOSAICmodeling
Commercial Software as ChemCAD®, MS Visio, PlantEngineer/X-Visual Technologies, E3D/AVEVA™ are provided in the course.
- Introduction to plant design, definitions, examples
- Fundamentals of process simulation and its central role in basic engineering
- Introduction to the Flowsheet Simulator ChemCAD® and adaption for the sample process
- Principles of cost estimation in chemical engineering and calculations for the sample process
- Introduction and generation of Engineering Documents (BFD, PFD, P&ID) based on DIN 28004 with MS Visio and the Add-In PlantEngineer
- Introduction to the basics of detail engineering
- Design and instrumentation of process units
- Introduction and generation of plot plans (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Fundamentals of piping design and isometrics
- 3D modelling of the sample process in E3D from AVEVA™ including piping design
- Automatic 3D equipment generation via MOSAICmodeling
Commercial Software as ChemCAD®, MS Visio, PlantEngineer/X-Visual Technologies, E3D/AVEVA™ are provided in the course.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Computergestützte Anlagenplanung | Integrated course | 0339 L 419 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Computergestützte Anlagenplanung (Integrated course) 1
- Computergestützte Anlagenplanung (CAP) (Integrierte Veranstaltung) 1. Termingruppe 0339 L 419
Workload and credit points
Computergestützte Anlagenplanung (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 10 | 8 h | 80 h |
| Preparation, report | 1 | 60 h | 60 h |
| Pre- and post-processing | 1 | 40 h | 40 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
In this course the complete planning process of an industrial example is exercised using the Flowsheet Simulator ChemCAD®, the 2D-Design tool MS Visio with the Add-In PlantEngineer and the 3D-Design tool Everything 3D. Parts of process simulation, functional planning, cost estimation, elevation drafts and piping design will be taught. In groups up to 3 persons the students have to deal with problems as they typically occur in process engineering.
Attention: The course is held in German.
Attention: The course is held in German.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Attended lectures:
- Prozess- und Anlagendynamik
- Thermodynamik
- Thermische Grundoperationen
- Prozesssimulation
- Prozess- und Anlagendynamik
- Thermodynamik
- Thermische Grundoperationen
- Prozesssimulation
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points per element |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Report | 7 | written | |
| Discussion | 3 | oral | 45 |
Exam description
Portfolio exam.
The grading system is explainded by the person in charge of the module at the beginning of the course. A written report about all planning steps of the sample process has to be handed in to this person after the course and at least two weeks before the oral discussion. The oral discussion will take about 1 h and be about lecture content and the own sample process. The total grade for the course results to 70 % from the report and 30 % from the oral discussion. Report and oral discussion are absolved as a team (= students who planned the sample process together). Please contact the person in charge of the module at most one month before you plan to take the oral exam for organisational reasons.
The grading system is explainded by the person in charge of the module at the beginning of the course. A written report about all planning steps of the sample process has to be handed in to this person after the course and at least two weeks before the oral discussion. The oral discussion will take about 1 h and be about lecture content and the own sample process. The total grade for the course results to 70 % from the report and 30 % from the oral discussion. Report and oral discussion are absolved as a team (= students who planned the sample process together). Please contact the person in charge of the module at most one month before you plan to take the oral exam for organisational reasons.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 24.
Registration procedures
The registration as "prüfungsäquivalente Studienleistung" is either done at the Prüfungsamt via "Gelber Zettel" or via QISPOS. The registration has to be done no later than one working day before the report is handed in.
Since the number of participants is restricted, a participation is only possible if there are suifficient capacities. You need to register beforehand on https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung/
Since the number of participants is restricted, a participation is only possible if there are suifficient capacities. You need to register beforehand on https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung/
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering MSc_ChemIng_2020 | SS 2023 | Wahlpflichtmodule › Prozesstechnik |
Master Energie- und Verfahrenstechnik (Bestandteil der Wahlpflichtliste „Rechnergestützte Methoden“), Master Process Energy Environmental Systems Engineering (Bestandteil der Wahlpflichtliste „Prozesssimulation“), Master Chemieingenieurwesen, Master Wirtschaftsingenieurwesen, Master Regenerative Energiesysteme
Miscellaneous
Not specified