Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Computer-aided Plant DesignModule description #30492 / Version 8

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v10)
Module / Version#30492 / #8
ValidityWinter semester 2023/24 – Summer semester 2025
Available language(s)German
Credit points6
Person responsible for the moduleRepke, Jens-Uwe
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351500 FG Dynamik und Betrieb technischer Anlagen

Contact

OfficeKWT 9
Contact personEichler, Philipp Julian
E-mail addresslehre@dbta.tu-berlin.de
Websitehttps://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung

Learning outcomes

The students:

- know and are able to use tools and methods for computer-aided plant design in a practical way. Starting from a basic flow diagram of the process, they are able to realize simulation, optimization, cost estimation, function and installation planning, 3D equipment design as well as piping design.
- are able to apply the methods of computer-aided plant design for the analysis and optimization of complex technical problems.
- have the ability to develop and innovate in the field of computer-aided plant design.
- are able to think in an interdisciplinary and responsible manner.
- are able to work independently in a scientific manner.
- have problem solving skills and the ability to work in a team.

The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% application and practice, 20% social competence

Content

Realization of a complete plant design process for an industrial example:

- Introduction to the basics of plant design, definition of terms, and examples.
- Basics of process simulation and process simulation as a central tool of process and plant planning (basic engineering).
- Introduction to the commercial process simulator ChemCAD® and simulation of an isobutane process
- Basics of cost calculation in chemical plant engineering; calculation of operating and investment costs of a rectification plant
- Basics of process flow diagrams (basic flow diagram, process flow diagram, RI flow diagram) according to DIN 28004
- Selection and instrumentation of process equipment
- Creation of a piping and instrumentation diagram (P&ID) for a rectification process using MS Visio/PlantEngineer from X-Visual Technologies
- Basics of dimensioning in process engineering and basic design of standard apparatus (rectification column, evaporator, condenser, tank)
- Basics and documents of installation planning (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Design of Equipment Plot Plan and Equipment Elevation Plan for the given rectification process
- Equipment set-up using the AVEVA™ E3D 3D equipment planning tool.
- Basics of piping planning and piping design, piping isometrics, piping systems.
- Piping of process equipment set up in E3D/AVEVA™ (column, condenser, pumps, etc.)

Commercial software such as ChemCad®, MS Visio, PlantEngineer/X-Visual Technologies, E3D/AVEVA™ are available for teaching.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Computergestützte AnlagenplanungIntegrated course0339 L 419 Winter and summer semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Computergestützte Anlagenplanung (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Computergestützte Anlagenplanung (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance108 h80 h
Preparation, report160 h60 h
Pre- and post-processing140 h40 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lectures and computer-based exercises are conducted. In the computer-based exercises, given tasks are to be solved independently in small groups of 2 - 3 students and documented in a report. A departmental PC pool with the software required for processing is available.

Attention: The course is held in German.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Attended lectures:
- Prozess- und Anlagendynamik
- Thermodynamik
- Thermische Grundoperationen
- Prozesssimulation

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points per element
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Report7written
Oral feedback3oral45 minutes

Exam description

Portfolio examination.
The grading scheme will be announced by the module supervisor at the beginning of the semester.
The created reports and protocols will be handed in and graded. This is followed by an oral feedback discussion (approx. 1 h) based on the report.
The overall grade is a combination of the grade of the report (70%) and the oral discussion (30%).

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 24.

Registration procedures

Pre-registration for the course is possible via https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung/.
The registration for the examination takes place via the MTS. Registration must take place at least one working day before the first part of the course is due.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – https://www.isis.tu-berlin.de

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Chemical Engineering
MSc_ChemIng_2020
WS 2023/24Wahlpflichtmodule › Prozesstechnik
SS 2024Wahlpflichtmodule › Prozesstechnik
WS 2024/25Wahlpflichtmodule › Prozesstechnik
SS 2025Wahlpflichtmodule › Prozesstechnik
Energy Engineering and Process Engineering
StuPO 2009
SS 2025Rechnergestützte Methoden
Process Energy and Environmental Systems Engineering
Process Energy and Environmental Systems Engineering (M. Sc.) - StuPO 2016
SS 2025Wahlpflichtmodule › Wahlpflichtliste 2 - Prozesssimulation und -führung
Process Energy and Environmental Systems Engineering
StuPO 2022
SS 2025Wahlpflichtmodule › Process Systems Engineering
Sustainable Energy and Process Engineering
StuPO 2024
SS 2025Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods

Miscellaneous

Attention: The course is held in German.