Computer-aided Plant DesignModule description #30492 / Version 9
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v10)
| Module / Version | #30492 / #9 |
|---|---|
| Validity | Winter semester 2025/26 – Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Eichler, Philipp Julian |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung |
Learning outcomes
The students:
- know and are able to use tools and methods for computer-aided plant design in a practical way. Starting from a basic flow diagram of the process, they are able to realize simulation, optimization, cost estimation, function and installation planning, 3D equipment design as well as piping design.
- are able to apply the methods of computer-aided plant design for the analysis and optimization of complex technical problems.
- have the ability to develop and innovate in the field of computer-aided plant design.
- are able to think in an interdisciplinary and responsible manner.
- are able to work independently in a scientific manner.
- have problem solving skills and the ability to work in a team.
The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% application and practice, 20% social competence
- know and are able to use tools and methods for computer-aided plant design in a practical way. Starting from a basic flow diagram of the process, they are able to realize simulation, optimization, cost estimation, function and installation planning, 3D equipment design as well as piping design.
- are able to apply the methods of computer-aided plant design for the analysis and optimization of complex technical problems.
- have the ability to develop and innovate in the field of computer-aided plant design.
- are able to think in an interdisciplinary and responsible manner.
- are able to work independently in a scientific manner.
- have problem solving skills and the ability to work in a team.
The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% application and practice, 20% social competence
Content
Realization of a complete plant design process for an industrial example:
- Introduction to the basics of plant design, definition of terms, and examples.
- Basics of process simulation and process simulation as a central tool of process and plant planning (basic engineering).
- Introduction to the commercial process simulator ChemCAD® and simulation of an isobutane process
- Basics of cost calculation in chemical plant engineering; calculation of operating and investment costs of a rectification plant
- Basics of process flow diagrams (basic flow diagram, process flow diagram, RI flow diagram) according to DIN 28004
- Selection and instrumentation of process equipment
- Creation of a piping and instrumentation diagram (P&ID) for a rectification process using MS Visio/PlantEngineer from X-Visual Technologies
- Basics of dimensioning in process engineering and basic design of standard apparatus (rectification column, evaporator, condenser, tank)
- Basics and documents of installation planning (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Design of Equipment Plot Plan and Equipment Elevation Plan for the given rectification process
- Equipment set-up using the AVEVA™ E3D 3D equipment planning tool.
- Basics of piping planning and piping design, piping isometrics, piping systems.
- Piping of process equipment set up in E3D/AVEVA™ (column, condenser, pumps, etc.)
Commercial software such as ChemCad®, MS Visio, PlantEngineer/X-Visual Technologies, E3D/AVEVA™ are available for teaching.
- Introduction to the basics of plant design, definition of terms, and examples.
- Basics of process simulation and process simulation as a central tool of process and plant planning (basic engineering).
- Introduction to the commercial process simulator ChemCAD® and simulation of an isobutane process
- Basics of cost calculation in chemical plant engineering; calculation of operating and investment costs of a rectification plant
- Basics of process flow diagrams (basic flow diagram, process flow diagram, RI flow diagram) according to DIN 28004
- Selection and instrumentation of process equipment
- Creation of a piping and instrumentation diagram (P&ID) for a rectification process using MS Visio/PlantEngineer from X-Visual Technologies
- Basics of dimensioning in process engineering and basic design of standard apparatus (rectification column, evaporator, condenser, tank)
- Basics and documents of installation planning (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Design of Equipment Plot Plan and Equipment Elevation Plan for the given rectification process
- Equipment set-up using the AVEVA™ E3D 3D equipment planning tool.
- Basics of piping planning and piping design, piping isometrics, piping systems.
- Piping of process equipment set up in E3D/AVEVA™ (column, condenser, pumps, etc.)
Commercial software such as ChemCad®, MS Visio, PlantEngineer/X-Visual Technologies, E3D/AVEVA™ are available for teaching.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Computergestützte Anlagenplanung (CAP) | Integrated course | 0339 L 419 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Computergestützte Anlagenplanung (CAP) (Integrated course) 1
- Computergestützte Anlagenplanung (CAP) (Integrierte Veranstaltung) 1. Termingruppe 0339 L 419
Workload and credit points
Computergestützte Anlagenplanung (CAP) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 10 | 8 h | 80 h |
| Preparation, report | 1 | 60 h | 60 h |
| Pre- and post-processing | 1 | 40 h | 40 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures and computer-based exercises are conducted. In the computer-based exercises, given tasks are to be solved independently in small groups of 2 - 3 students and documented in a report. A departmental PC pool with the software required for processing is available.
Attention: The course is held in German.
Attention: The course is held in German.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Attended lectures:
- Prozess- und Anlagendynamik
- Thermodynamik
- Thermische Grundoperationen
- Prozesssimulation
- Prozess- und Anlagendynamik
- Thermodynamik
- Thermische Grundoperationen
- Prozesssimulation
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Report | 70 | written | 90 pages max. |
| Oral feedback | 30 | oral | 40 minutes |
Exam description
The grading scheme will be announced by the module supervisor at the beginning of the semester.
The created reports and protocols will be handed in and graded. This is followed by an oral feedback discussion based on the report.
The overall grade is a combination of the grade of the report (70%) and the oral discussion (30%).
The created reports and protocols will be handed in and graded. This is followed by an oral feedback discussion based on the report.
The overall grade is a combination of the grade of the report (70%) and the oral discussion (30%).
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 24.
Registration procedures
Pre-registration for the course is possible via https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung/.
The registration for the examination takes place via the MTS. Registration must take place at least one working day before the first part of the course is due.
The registration for the examination takes place via the MTS. Registration must take place at least one working day before the first part of the course is due.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering MSc_ChemIng_2020 | WS 2025/26 | Wahlpflichtmodule › Prozesstechnik |
| Energy Engineering and Process Engineering StuPO 2009 | WS 2025/26 | Rechnergestützte Methoden |
| Process Energy and Environmental Systems Engineering Process Energy and Environmental Systems Engineering (M. Sc.) - StuPO 2016 | WS 2025/26 | Wahlpflichtmodule › Wahlpflichtliste 2 - Prozesssimulation und -führung |
| Process Energy and Environmental Systems Engineering StuPO 2022 | WS 2025/26 | Wahlpflichtmodule › Process Systems Engineering |
| Sustainable Energy and Process Engineering StuPO 2024 | WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods |
Miscellaneous
Not specified