Process and Plant DynamicsModule description #30523 / Version 6
- 6 CP
- Oral exam
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v9)
| Module / Version | #30523 / #6 |
|---|---|
| Validity | WS 2019/20 – Winter semester 2021/22 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Rohde, Niclas |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/prozessmodellierung |
Learning outcomes
Students:
- may transfer modeling systematics into the program code of a programming language (e.g., Matlab, Fortran, MOSAIC, gProms),
- master techniques that can efficiently solve the equation systems resulting from modeling (ODE's, DAE's and PDEs),
- can solve simulation tasks independently,
- can make different model assumptions and critically check,
- have the ability to compare commercial simulation software (e.g., Aspen or ChemCAD) and be able to choose the appropriate tools for a problem in the field of process simulation.
The event mediates:
- 20% Knowledge & Understanding
- 20% Analysis & Methodology
- 20% Development & Design
- 20% research & evaluation
- 20% application & practice
- may transfer modeling systematics into the program code of a programming language (e.g., Matlab, Fortran, MOSAIC, gProms),
- master techniques that can efficiently solve the equation systems resulting from modeling (ODE's, DAE's and PDEs),
- can solve simulation tasks independently,
- can make different model assumptions and critically check,
- have the ability to compare commercial simulation software (e.g., Aspen or ChemCAD) and be able to choose the appropriate tools for a problem in the field of process simulation.
The event mediates:
- 20% Knowledge & Understanding
- 20% Analysis & Methodology
- 20% Development & Design
- 20% research & evaluation
- 20% application & practice
Content
Specific tasks in the field of simulation of process engineering processes
Practical application of the methods of process simulation with different simulation tools of different depth of detail:
- professional process simulation program such as ChemCAD or MOSAIC with already implemented modeling system and numerics
- high-level programming language like Matlab, in which model equations and solution algorithms have to be developed independently, but can also be varied and adapted
Practical application of the methods of process simulation with different simulation tools of different depth of detail:
- professional process simulation program such as ChemCAD or MOSAIC with already implemented modeling system and numerics
- high-level programming language like Matlab, in which model equations and solution algorithms have to be developed independently, but can also be varied and adapted
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Prozess- und Anlagendynamik | Lecture | 0339 L 401 | Winter and summer semester | [en, de] | 4 | WS 2026/27 (1) ISIS |
| Prozess- und Anlagendynamik | Exercise | 0339 L 402 | Winter and summer semester | [en, de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Prozess- und Anlagendynamik (Lecture) 1
- Prozessmodellierung (Vorlesung) Termingruppe 1 0339 L 401
Prozess- und Anlagendynamik (Exercise) 1
- Prozessmodellierung (Übung) Termingruppe 1 0339 L 402
Workload and credit points
Prozess- und Anlagendynamik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre-/Post-Processing | 15 | 1 h | 15 h |
| 75 h | |||
Prozess- und Anlagendynamik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre-/Post-Processing | 15 | 1 h | 15 h |
| 45 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Examn preparation | 1 | 60 h | 60 h |
| 60 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The lecture contains analytical and computer-aided exercises. In the exercise lessons the tasks are solved with support of the lecturer and computer-aided solution strategies are demonstrated. On top of that, different exercises can be solved independently in the PC Pool of the department.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
- Thermodynamik II,
- Grundkenntnisse der Verfahrenstechnik,
- Grundkenntnisse der verfahrenstechnischen Grundoperationen
- Grundkenntnisse der Regelungstechnik
- Grundkenntnisse der Verfahrenstechnik,
- Grundkenntnisse der verfahrenstechnischen Grundoperationen
- Grundkenntnisse der Regelungstechnik
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | 45min |
Exam description
Gewichtung der einzelnen Prüfungselemente sowie das Benotungsschema werden zu Beginn des
Semesters vom Modulverantwortlichen bekannt gegeben.
Für VL Mündliche Prüfung:
Prüfungstermin wöchentlich meist Donnerstags ab 10.15 Uhr bzw. nach Absprache
Für Übung Abgabe einer Hausaufgabe zu den o.a. Inhalten
Gewichtung der Note: VL :Übg.: 2:1
Semesters vom Modulverantwortlichen bekannt gegeben.
Für VL Mündliche Prüfung:
Prüfungstermin wöchentlich meist Donnerstags ab 10.15 Uhr bzw. nach Absprache
Für Übung Abgabe einer Hausaufgabe zu den o.a. Inhalten
Gewichtung der Note: VL :Übg.: 2:1
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
The registration for the oral exam is done by QISPOS or via a "gelben Zettel" from the Prüfungsamt. The date is allaocated by the Online Exam-registration-tool:
https://mosaic.service.tu-berlin.de/mosaic/examen/
To attend the module no extra registration is needed.
Attention: If the number of participants is large the modul might be completed by a written exam instead of the oral exam.
https://mosaic.service.tu-berlin.de/mosaic/examen/
To attend the module no extra registration is needed.
Attention: If the number of participants is large the modul might be completed by a written exam instead of the oral exam.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.dbta.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering MSc_ChemIng_2020 | WS 2020/21 | Wahlpflichtmodule › Prozesstechnik |
| SS 2021 | Wahlpflichtmodule › Prozesstechnik | |
| WS 2021/22 | Wahlpflichtmodule › Prozesstechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2020 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy |
| WS 2020/21 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| SS 2021 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| WS 2021/22 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy |
Die vermittelten Methoden spielen für die Prozessentwicklung, Prozesssimulation, Anlagenplanung und für den Betrieb verfahrenstechnischer Anlagen eine zentrale Rolle. Sie bilden die Basis für die Entwicklung von optimierten sowie sicherheitskonformen Lösungen und Automatisierungskonzepten. Darüber hinaus ist das erlernte "Denken in Modellen" allgemein anwendbar
Miscellaneous
Attention: If the number of participants is large the modul might be completed by a written exam instead of the oral exam.