Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Process and Plant DynamicsModule description #30523 / Version 8

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v9)
Module / Version#30523 / #8
ValiditySummer semester 2023 – Summer semester 2025
Available language(s)German
Credit points6
Person responsible for the moduleRepke, Jens-Uwe
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351500 FG Dynamik und Betrieb technischer Anlagen

Contact

OfficeKWT 9
Contact personRohde, Niclas
E-mail addresslehre@dbta.tu-berlin.de
Websitehttps://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/prozessmodellierung

Learning outcomes

Outcome
The students
- have basic knowledge on process modeling and can systematically derive models for technical processes and practical examples,
- can independently develop and evaluate models and work out solutions for entire processes for optimal, flexible, and safe operation,
- are competent in selecting and applying suitable solution methods for process models,
- are able to integrate process models into process simulations, providing necessary specifications and solver information,
- have problem-solving competence for the evaluation of dynamic process behavior,
- are able to build up suitable (plant-wide) control schemes based on process model and the system dynamics.

The course imparts:
40% knowledge & understanding, 20% analysis & methodology, 20% development & design,
20 % Application & Practice

Content

Process and Plant Dynamics or Process Modeling deals with the fundamentals of modeling process found in process engineering. For this purpose, a systematic modeling scheme based on first-principles modeling is introduced and applied using process engineering examples. First, models for steady-state processes are developed before dynamic process modeling using differential equation systems and differential algebra systems is outlined. For all occurring model structures, common solution methods are presented and directly applied to formulated models. In addition, process dynamics as well as the development of plant-wide control schemes are discussed.
The lecture covers in detail:
- Definitions of process and models
- Development of a universal systematic modeling scheme
- Steady-state and dynamic modeling of typical process engineering units
- Discussion and application of flow-driven, pressure-driven and non-equilibrium modeling
- Analysis and solution of AE, ODE and DAE equation systems
- Degree of freedom analysis and setup of process simulations
- Data driven modeling
- Analysis of process dynamics and influence of reactions, heat recoveries and recycle flows
- Plant-wide process control concepts

Exercise contents:
- In depth discussion of the lecture contents using complete process modeling examples
- Application and deepening of the modeling systematics
- Processes: mixer, splitter, CSTR, SBR, flash, rectification column
- Derivation and application of solution methods for obtained equation systems
- Implementation of process simulations in Matlab

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Prozess- und AnlagendynamikLecture0339 L 401 Summer semester[en, de]4 ISIS
Prozess- und AnlagendynamikExercise0339 L 402 Summer semester[en, de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Prozess- und Anlagendynamik (Lecture) 1

All groups of this course in the catalog

Prozess- und Anlagendynamik (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Prozess- und Anlagendynamik (Lecture)

Workload descriptionMultiplierHoursTotal
presence time154 h60 h
Pre- / Postprocessing151 h15 h
75 h

Prozess- und Anlagendynamik (Exercise)

Workload descriptionMultiplierHoursTotal
presence time152 h30 h
Pre- / Postprocessing151 h15 h
45 h

Course-independent workload

Workload descriptionMultiplierHoursTotal
exam preparation160 h60 h
60 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Standard lectures with embedded programming examples. Exercises are demonstrated and solved together with lecturer, while given examples simulated using Matlab. Exercises can be further studied using the departments PC pool.

Summer term - lectures in person (language German, material Englisch)
Winter term - Online lecture (Englisch)

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Thermodynamics, fundamental of process engineering, thermal engineering units, and process control.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extent45min

Exam description

Gewichtung der einzelnen Prüfungselemente sowie das Benotungsschema werden zu Beginn des
Semesters vom Modulverantwortlichen bekannt gegeben.
Für VL Mündliche Prüfung:
Prüfungstermin wöchentlich meist Donnerstags ab 10.15 Uhr bzw. nach Absprache
Für Übung Abgabe einer Hausaufgabe zu den o.a. Inhalten
Gewichtung der Note: VL :Übg.: 2:1

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Exam registration officially via exam office.
Exam scheduling is organized via: https://mosaic.service.tu-berlin.de/mosaic/examen/
Registration for lecture and exercise is done via (no limits): https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/prozess-und-anlagendynamik/

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – http://www.dbta.tu-berlin.de

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Chemical Engineering
MSc_ChemIng_2020
WS 2022/23Wahlpflichtmodule › Prozesstechnik
SS 2023Wahlpflichtmodule › Prozesstechnik
WS 2023/24Wahlpflichtmodule › Prozesstechnik
SS 2024Wahlpflichtmodule › Prozesstechnik
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik
Energy Engineering and Process Engineering
StuPO 2009
SS 2025Pflichtmodule
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.5 Thermodynamik › 2.5b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.5 Thermodynamik › 2.5b Ergänzungsbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2023Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Resources
WS 2023/24Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Chemie und Verfahrenstechnik/Chemistry and Process Engineering (CVT) › Chemie und Verfahrenstechnik/Chemistry and Process Engineering (Wahlpflicht/Compulsory-Elective)
SS 2024Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy
Process Energy and Environmental Systems Engineering
Process Energy and Environmental Systems Engineering (M. Sc.) - StuPO 2016
SS 2025Pflichtmodule
Process Energy and Environmental Systems Engineering
StuPO 2022
SS 2025Pflichtmodule
The methods taught play a central role for process development, process simulation, plant engineering and for the operation of processes. They form the basis for the development of optimized and safety-compliant solutions and automation concepts. In addition, the "thinking in models" attitude learned is generally applicable.

Miscellaneous

Not specified