Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Multivariable and Robust Control in Frequency DomainModule description #30526 / Version 7

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v8)
Module / Version#30526 / #7
ValidityWinter semester 2024/25 – Summer semester 2026
Available language(s)German
Credit points6
Person responsible for the moduleKnorn, Steffi
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351600 FG Regelungstechnik

Contact

OfficeER 2-1
Contact personKnorn, Steffi
E-mail addressknorn@tu-berlin.de
Websitehttp://tu.berlin/ctrl

Learning outcomes

After attending the module, the students can analyze and set up multivariable control in the frequency domain, know how to describe uncertainties and convert this information into a controller synthesis.

The skills learned allow systems with uncertain models to be adequately described, analyzed and corresponding, suitable controllers to be created. In process engineering, for example, this allows the consideration of educts, resources and general input variables that deviate from the average and thus influence the system behavior. Through the explicit consideration of these uncertainties and deviations as well as the design of control concepts, which nevertheless ensure an unacceptable performance of the process, the methods taught are particularly suitable for complex processes and also include the use of renewable raw materials, which often have a larger spectrum of possible properties.

Content

Various methods of robust and non-robust controller synthesis of single and multivariable systems in the frequency domain are discussed. In particular, the following content is dealt with:
- Repetition of non-robust controller synthesis for SISO systems, loop shaping
- Limitations of the achievable control quality
- Uncertainty descriptions for SISO and MIMO systems
- Properties and analysis of multivariable systems
- Simple (classic) control approaches for multivariable systems
- Performance and robustness of SISO and MIMO systems
- Controller synthesis for multivariable systems (H2, H-infinity and mu synthesis)

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Robuste Regelung / Mehrgrößenregelung im FrequenzbereichIntegrated course745 Winter semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Robuste Regelung / Mehrgrößenregelung im Frequenzbereich (Integrated course) 2

All groups of this course in the catalog

Workload and credit points

Robuste Regelung / Mehrgrößenregelung im Frequenzbereich (Integrated course)

Workload descriptionMultiplierHoursTotal
on site attendance154 h60 h
project work130 h30 h
preparation and post-processing152 h30 h
exam preparation160 h60 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lectures, analytical exercises and computer exercises are used. In the analytical and computer-aided exercises, the tasks are solved with the support of the teacher.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) obligatory: "Fundamentals of measurement and control", "Fundamentals of control technology" or a comparable module
b) desirable: Knowledge of MATLAB/SIMULINK, e.g. from "Computer-aided exercises in control engineering"

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageEnglish, German
Duration/Extent40 minutes

Exam description

The grade consists of 40% of a project and 60% of an oral exam.

The exam can also be conducted in English and English literature is available.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

none

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – www.isis.tu-berlin.de

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20251. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
SS 20261. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20253. Kernbereich: Messen, Steuern, Regeln
WS 2025/263. Kernbereich: Messen, Steuern, Regeln
SS 20263. Kernbereich: Messen, Steuern, Regeln
Energy Engineering and Process Engineering
StuPO 2009
SS 2025Vertiefung Energie- und Verfahrenstechnik
WS 2025/26Vertiefung Energie- und Verfahrenstechnik
SS 2026Vertiefung Energie- und Verfahrenstechnik
Energy Engineering and Process Engineering
StuPO 2014
SS 2025Wahlpflicht für den Master RES › Wahlpflicht
WS 2025/26Wahlpflicht für den Master RES › Wahlpflicht
SS 2026Wahlpflicht für den Master RES › Wahlpflicht
Engineering Science
StuPO 09.01.2012
SS 202506. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
WS 2025/2606. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
SS 202606. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.3 Mechatronik › 2.3b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20262.3 Mechatronik › 2.3b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.3 Mechatronik › 2.3b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20262.3 Mechatronik › 2.3b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 2025Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
WS 2025/26Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
SS 2026Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
Erneuerbare Energien und Verfahrenstechnik
StuPO 2025
WS 2025/26Wahlpflichtbereich › Fachspezifische Wahlpflicht
SS 2026Wahlpflichtbereich › Fachspezifische Wahlpflicht
Regenerative Energy Systems
StuPO 2023
SS 2025Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
WS 2025/26Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
SS 2026Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
Sustainable Energy and Process Engineering
StuPO 2024
SS 2025Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes
WS 2025/26Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes
SS 2026Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes
For ITM: Kernbereich 3
For PI: 2.2b Strömungsmechanik - Ergänzungsbereich

Miscellaneous

Literature: see course script

The exam can also be conducted in English and English literature is available.