Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Materials Science (6 cp)Module description #30546 / Version 4

← Module page Deutsche Fassung
Module / Version#30546 / #4
ValiditySince Winter semester 2026/27
Available language(s)English, German
Credit points6
Person responsible for the moduleFleck, Claudia
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Werkstoffwissenschaften und -technologien
Academic chair33341100 FG Werkstofftechnik

Contact

OfficeEB 13
Contact personFleck, Claudia
E-mail addressclaudia.fleck@tu-berlin.de
Websitehttp://www.tu-berlin.de/fak_3/institut_fuer_werkstoffwissenschaften_und_-technologien/werkstofftechnik/menue/studium_und_lehre/werkstoffkunde/

Learning outcomes

The ‘Materials Science’ module aims to provide engineers working in all areas of technology with a basic understanding of the relationship between material structure, stress and material behaviour, primarily using metallic materials as examples. This should enable them to make fundamental decisions about the selection and application of materials when designing components, while taking the load situation into account in consultation with a materials specialist.

The course covers:
50% technical expertise, 30% methodological expertise, 10% systems expertise, 10% social skills

Content

I Introduction: atomic structure and bonding, solid-state structure, material groups.

II Metallic materials: Structural composition: lattice structures, lattice defects. Alloy systems in equilibrium: component/phase/microstructure, two-component systems, phase diagrams, phase rule, lever rule. Systems in disequilibrium: time-temperature-transformation diagrams, recovery and recrystallisation. Fe-C alloy system (metastable): phases, materials, transformation processes, microstructure, heat treatment, influence of important alloying elements. Important steels. Notation. Fe-C alloy system (stable): phases, microstructure. Important cast irons. Notation of non-ferrous alloys with a focus on Al alloys, heat treatment and hardening. Magnesium alloys and their notation. Ti alloys and their notation.

III Mechanical properties: Deformation: elasticity, plasticity, deformation mechanisms, hardening mechanisms, hardening/softening processes. Fracture behaviour: ductile fracture, brittle fracture, fatigue fracture. Test methods: tensile test, hardness test, notch impact test, fatigue test, creep test. Mechanical design parameters.

IV Material-related problems during processing: casting, powder metallurgy, welding.

V Corrosion of metals: basic processes: electrolytic solution, corrosion element, passivation. Manifestations: uniform/localised corrosion. Corrosion protection: principle, examples.
VI Polymer materials: Structural composition: monomers - polymers. Thermoplastics, thermosets and elastomers. Constitution, conformation, configuration. Mechanical properties: deformation behaviour, characteristic values, influence of temperature. Important polymer materials.

VII Ceramic materials: Structural composition. Manufacturing process (sintering). Mechanical properties: Deformation behaviour, characteristic values. Important ceramic materials.

VIII Composite materials: Structural design. Mechanical properties: Stiffness, strength, failure behaviour, pseudoductility, crack propagation. Important composite material systems

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Werkstoffkunde IIntegrated course0334 L 033 Summer semester[de]2 ISIS
Werkstoffkunde IInternship0334 L 031 Summer semester[de]1 ISIS
Werkstoffkunde IIIntegrated course0334 L 112 Winter semester[de]2 ISIS
Werkstoffkunde IIInternship0334 L 109 Winter semester[de]1 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (37)

Werkstoffkunde II (Integrated course) 1

All groups of this course in the catalog

Werkstoffkunde II (Internship) 36

All groups of this course in the catalog

Workload and credit points

Werkstoffkunde I (Integrated course)

Workload descriptionMultiplierHoursTotal
attendance time152 h30 h
Pre/post-processing151 h15 h
45 h

Werkstoffkunde I (Internship)

Workload descriptionMultiplierHoursTotal
attendance time151 h15 h
Pre/post-processing150.5 h7.5 h
22.5 h

Werkstoffkunde II (Integrated course)

Workload descriptionMultiplierHoursTotal
attendance time152 h30 h
Pre/post-processing151 h15 h
45 h

Werkstoffkunde II (Internship)

Workload descriptionMultiplierHoursTotal
attendance time151 h15 h
Pre/post-processing150.5 h7.5 h
22.5 h

Course-independent workload

Workload descriptionMultiplierHoursTotal
exam preparation145 h45 h
45 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Knowledge is primarily imparted in the IV. These consist of lecture and exercise components. The practical course consists of a theoretical and a practical part and serves to deepen important thematic focal points using practical examples and with the aid of demonstration experiments. It is therefore carried out in small groups. The experiments should be carried out independently under supervision as far as possible. At the beginning of an experiment, a group of students summarises the material from the last session in the form of a short presentation. The aim is for each student to give a short presentation at least once per semester.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

The material covered in IV is a prerequisite for participation in the practice course.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Participation in all practical experiments and a group presentation10oral10 x 20 min
Homework assignments on 10 topics from IV and PR20written5 hours
Test on IV Materials Science I30written60 min
Test on IV Materials Science II40written60 min

Exam description

A total of 100 points can be earned in a portfolio assessment in this module - grading according to Scheme 2 Faculty III:
Participation in all practical experiments and a group presentation: 10 points.
Homework assignments on 10 topics from IV and PR: 30 points.
Test on IV Materials Science I (after the end of the lecture period in the summer semester) 30 points.
Test on IV Materials Science II (after the end of the lecture period in the winter semester) 30 points.
Note: The assignments are completed in subgroups formed during the practical course and are therefore only possible with regular participation in the assigned practical course group.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration for the practical course takes place during the first week of lectures in the summer semester (Part I) or winter semester (Part II) online (MOSES);
the date and registration formalities will be announced on the department's website.

Please also note the date for the mandatory safety briefing, without which we cannot admit you to the practical course.
Please be sure to contact us if you are not yet of legal age.
Registration for the examination takes place in the summer semester within the first four weeks after the start of the semester at MOSES, at the latest before the first partial performance is rendered.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – IV documents, IV glossary, worksheets/scripts/homework on IV and P, tasks for preparation/follow-up, submission of homework: via ISIS

Recommended literature

  • Bargel, H.-J., Schulze, G. (Hrsg.): „Werkstoffkunde“, Springer-Verlag Berlin Heidelberg 11. Auflage, 2012
  • Bergmann, W.: „Werkstofftechnik”, Carl Hanser Verlag München Teil I: Grundlagen z. Auflage, 2013, Teil II: Anwendung 4. Auflage, 2009
  • Callister, W.D., Rethwisch, D.G.: „Materialwissenschaften und Werkstofftechnik“, Wiley VCH, 1. Auflage 2013
  • Macherauch, E.: “Praktikum in Werkstoffkunde”, Vieweg & Sohn, Braunschweig.
  • Shackelford, J.F. „Werkstofftechnologie für Ingenieure“, Pearson Education Inc. Pearson Prentice Hall, New Jersey, USA, 8. Auflage, 2007

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Automotive Engineering (teacher training)
Kernfach StuPO 2016
WS 2026/27Fachwissenschaftlicher Vertiefungsbereich
Automotive Engineering (teacher training)
Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020
WS 2026/27Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich
Automotive Engineering (teacher training)
Zweitfach StuPO 2016
WS 2026/27Fachwissenschaftlicher Vertiefungsbereich
Automotive Engineering (teacher training)
Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020
WS 2026/27Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
WS 2026/275. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.4 Konstruktion
Engineering Science
StuPO 2020
WS 2026/27Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Pflicht)
Mechanical Engineering
StuPO 2017
WS 2026/27Pflichtbereich › Technische Grundlagen
Metals Engineering (teacher training)
Metals Engineering (teacher training) (B. Sc.) - StuPO 2015
WS 2026/27Fachwissenschaft › Pflichtbereich
Sociology and Technology Studies
StuPO 2014 (7. Mai 2014)
WS 2026/27Technisches Fach › Fabrikmanagement › Vertiefungsbereich
Transport Systems
StuPO 2018
WS 2026/27A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
The module is open to all degree programmes and faculties, but its content is primarily geared towards the needs of engineering sciences (mechanical engineering, transport engineering, industrial engineering with corresponding specialisations; physical engineering).

Miscellaneous

No restrictions on IVs; for practical training, participation is restricted for safety reasons.
The module can only be started in the summer semester.