Introduction to Additive Manufacturing (3D Printing)Module description #30667 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v5)
| Module / Version | #30667 / #2 |
|---|---|
| Validity | SS 2018 – WS 2019/20 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Gurlo, Aleksander |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Karl, David |
| E-mail address | itam@ceramics.tu-berlin.de |
| Website | https://www.tu.berlin/ceramics |
Learning outcomes
Learning Outcomes:
The participants will gain comprehensive overview and can communicate general principles of all seven Additive Manufacturing (AM) process categories, processing routes and their terminology. They will learn and understand the strength and weaknesses of different AM technologies and specific feedstock materials. Furthermore, the students will be given the chance to experience major AM technologies first hand in lab visits and a practical part.
The participants will gain comprehensive overview and can communicate general principles of all seven Additive Manufacturing (AM) process categories, processing routes and their terminology. They will learn and understand the strength and weaknesses of different AM technologies and specific feedstock materials. Furthermore, the students will be given the chance to experience major AM technologies first hand in lab visits and a practical part.
Content
Teaching contents:
The course gives a general introduction into the rapidly developing field of Additive Manufacturing (AM), also known as 3D Printing. The lectures will provide an overview on the different processing routes and challenges in using these technologies to produce specific properties in components as well as an introduction to software for 3D data preparation for AM. Coursework will emphasise working principles and feedstock materials for all major AM technologies:
(i) Vat photopolymerization: Stereolithography, Digital Light Processing and Continuous Digital Light Processing, (ii) Material jetting: Drop on Demand and Polyjet technology, (iii) Binder jetting: Powder-based 3D Printing, (iv) Powder bed fusion: Laser Sintering, Selective Laser Melting, Electron Beam Melting and Multi Jet Fusion, (iiv) Material extrusion: Fused Deposition Modelling and Robocasting, (iiiv) Directed energy deposition: Laser Engineering Net Shape and Electron Beam Additive Manufacturing plus (iiiiv) Sheet lamination: Laminated Object Manufacturing.
The course gives a general introduction into the rapidly developing field of Additive Manufacturing (AM), also known as 3D Printing. The lectures will provide an overview on the different processing routes and challenges in using these technologies to produce specific properties in components as well as an introduction to software for 3D data preparation for AM. Coursework will emphasise working principles and feedstock materials for all major AM technologies:
(i) Vat photopolymerization: Stereolithography, Digital Light Processing and Continuous Digital Light Processing, (ii) Material jetting: Drop on Demand and Polyjet technology, (iii) Binder jetting: Powder-based 3D Printing, (iv) Powder bed fusion: Laser Sintering, Selective Laser Melting, Electron Beam Melting and Multi Jet Fusion, (iiv) Material extrusion: Fused Deposition Modelling and Robocasting, (iiiv) Directed energy deposition: Laser Engineering Net Shape and Electron Beam Additive Manufacturing plus (iiiiv) Sheet lamination: Laminated Object Manufacturing.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Additive Manufacturing (3D Printing) lab (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| Report preparation | 15 | 2 h | 30 h |
| 90 h | |||
Introduction to Additive Manufacturing (3D Printing) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| E-Learning | 15 | 1 h | 15 h |
| Exam preparation | 1 | 15 h | 15 h |
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of a lecture and a practical course (lab).
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Keine
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Oral examination | 55 | oral | ca. 20 min |
| Written report on practical course | 30 | written | |
| Presentation of research paper | 15 | oral | ca. 15 + 5 min |
Exam description
Portfolioprüfung (s. oben)
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 40.
Registration procedures
Die Anmeldung der Portfolio-Prüfung erfolgt im Prüfungsamt. Die Anmeldung muss bis einen Werktag vor Erbringen der ersten
bewertungsrelevanten Teilleistung, spätestens jedoch bis zum 31. Mai erfolgen.
bewertungsrelevanten Teilleistung, spätestens jedoch bis zum 31. Mai erfolgen.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – aus ISIS, veranstaltungsspezifisch
Recommended literature
- Gebhardt, Andreas; Hötter, Jan-Steffen (2016): Additive Manufacturing. 3D printing for prototyping and manufacturing. Munich, Cincinnati, OH: Carl Hanser Fachbuchverlag.
- ISO 17296-2, 15.01.2015: Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock.
- ISO/ASTM 52900, 15.12.2015: Additive manufacturing - General principles - Terminology.
Assigned programs
This module is not used in any program.
Miscellaneous
Werkstoffwissenschaften (Master of Science)
MSc Werkstoffwissenschaften 2009
Modullisten der Semester SS2018
Wahlplficht
Masterstudiengang "Werkstoffwissenschaften"
Profilbildung A1, A2, B5, B6.3
MSc Werkstoffwissenschaften 2009
Modullisten der Semester SS2018
Wahlplficht
Masterstudiengang "Werkstoffwissenschaften"
Profilbildung A1, A2, B5, B6.3