Angewandte WärmepumpentechnikModule description #31066 / Version 1
- 6 CP
- Oral exam
- Graded
- Winter semester
- German
| Module / Version | #31066 / #1 |
|---|---|
| Validity | Since Winter semester 2023/24 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Windmann, Thorsten |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351100 FG Thermodynamik |
Contact
| Office | BH 7-1 |
|---|---|
| Contact person | Windmann, Thorsten |
| E-mail address | windmann@tu-berlin.de |
| Website | Not specified |
Learning outcomes
The heat pump is becoming increasingly important above all as a heating system for buildings. Other important applications are the generation of industrial process heat at medium temperatures and the heating of electrically powered vehicles. In the lecture, the thermodynamic fundamentals of the heat pump process are first taught and the two energy sources, ambient energy and electrical energy, are discussed in detail. In addition, an understanding of the heat pump as a heating system for buildings is created. In addition to the technical components of a heating system, relevant standards for heat load calculation and legal framework conditions also play a role. Furthermore, knowledge about the technical components of a heat pump, such as compressor, heat exchanger and expansion valve, is imparted. The aim is to gain detailed knowledge about designing a heat pump process and the influence of the components on the efficiency of a real heat pump for residential heating. In the last part of the lecture, important selected topics from heat pump practice are discussed. These include, for example, refrigerants, control of heat pump systems and defrosting procedures.
Content
1. Thermodynamic basics: heat pump cycles, efficiency (COP, JAZ, SCOP), Carnot process, influences of process design on efficiency
2. Energy sources: Heat sources: Ambient heat, geothermal heat, (industrial) waste heat; Electrical energy: power generation and distribution, storage
3. Heating system: technical components, heating load calculation, legal framework (e.g. GEG)
4. Components of a heat pump: compressor, heat exchanger, expansion valve, filter dryer, fan; design of components
5. Selected topics: Refrigerant, control engineering, defrosting method, intermediate injection, inverter, case study of a real heat pump
2. Energy sources: Heat sources: Ambient heat, geothermal heat, (industrial) waste heat; Electrical energy: power generation and distribution, storage
3. Heating system: technical components, heating load calculation, legal framework (e.g. GEG)
4. Components of a heat pump: compressor, heat exchanger, expansion valve, filter dryer, fan; design of components
5. Selected topics: Refrigerant, control engineering, defrosting method, intermediate injection, inverter, case study of a real heat pump
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Angewandte Wärmepumpentechnik | Exercise | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS | |
| Angewandte Wärmepumpentechnik | Lecture | Winter semester | [de] | 2 | WS 2026/27 (2) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (3)
Angewandte Wärmepumpentechnik (Exercise) 1
- Angewandte Wärmepumpentechnik (Übung) Termingruppe 1
Angewandte Wärmepumpentechnik (Lecture) 2
- Angewandte Wärmepumpentechnik (Vorlesung) (Vorlesung)
- Angewandte Wärmepumpentechnik (Vorlesung) Termingruppe 1
Workload and credit points
Angewandte Wärmepumpentechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Angewandte Wärmepumpentechnik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfungsvorbereitung | 1 | 40 h | 40 h |
| 40 h | |||
The workload of the module adds up to 160 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
VL/ UE: Frontal teaching (blackboard, beamer) with all students
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Thermodynamik I
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | 30 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration takes place in the department. The exam registration takes place in the examination office or if possible online via Qispos oder MOSES.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Building Energy Engineering Building Energy Engineering (M. Sc.) - StuPO 2024 | WS 2026/27 | Vertiefung Energietechnik |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik |
| WS 2025/26 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| SS 2026 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| WS 2026/27 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.5 Thermodynamik |
| WS 2025/26 | 06. Schwerpunkte › 6.5 Thermodynamik | |
| SS 2026 | 06. Schwerpunkte › 6.5 Thermodynamik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.5 Thermodynamik › 2.5a Kernbereich |
| WS 2025/26 | 2.5 Thermodynamik › 2.5a Kernbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.5 Thermodynamik › 2.5a Kernbereich |
| WS 2025/26 | 2.5 Thermodynamik › 2.5a Kernbereich | |
| SS 2026 | 2.5 Thermodynamik › 2.5a Kernbereich | |
| WS 2026/27 | 2.5 Thermodynamik › 2.5a Kernbereich | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik | |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Fluid Mechanics |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Energie und Ressourcen/Energy and Resources (ER) › Energie und Ressourcen/Energy and Resources (Wahlpflicht/Compulsory-Elective) › Energy | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Fluid Mechanics | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Fluid Mechanics | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Fluid Mechanics |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Produkte |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Produkte | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Produkte | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Produkte | |
| Regenerative Energy Systems StuPO 2023 | SS 2025 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik |
| WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| WS 2026/27 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik |
Miscellaneous
Not specified