Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Electronics with Practical CourseModule description #40079 / Version 11

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v12)
Module / Version#40079 / #11
ValidityWinter semester 2025/26 – Summer semester 2026
Available language(s)English, German
Credit points9
Person responsible for the moduleKolossa, Dorothea
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311700 FG Sensorik und Aktuatorik / Messtechnik

Contact

OfficeEN 3
Contact personCampe, Ferdinand Otto Werner
E-mail addresscampe@tu-berlin.de
Websitehttps://www.tu.berlin/mtec

Learning outcomes

Based upon the basic kowledge conveyed in circuit and microprocessor technology, the students know the theoretical fundamentals of developing electronical hardware modules. They are proficient with the basics of electronic systems, are capable of performing the necessary calculations and are acquiainted with the methods for designing, dimensioning and integrating systems. They are furthermore able to dimension, build and measure the respective circuits.

Content

The lecture teaches the operation of analog and digital electronical components and systems, as well as their design and system integration. Concrete contents are operational amplifiers, filter circuits, oscillators, phase locked loops, analog-digital/digital-analog converters, programmable logic and select areas of micro- and signal processors. The tutorials are concerned with the exemplary design and calculations of these circuit types.
The laboratory units encompass the dimensioning, building and measuring of the circuits theoretically considered in the lecture, also expanding them to real-world applications and pointing out the necessary changes which need be made.
Optionally, by selecting the module "Projekt Elektronik", one can design, build and test the hard- and software of a freely chosen electronical system. The work in goups of approximatively eight participants demands - other than technical competence - teamwork and project management skills.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
ElektronikInternship0430 L 5672 Winter semester–2 ISIS
ElektronikLecture3431 L 5670 Winter semester–2 ISIS
ElektronikExercise3431 L 5671 Winter semester–2 ISIS

Workload and credit points

Elektronik (Internship)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Preparation/post-processing154 h60 h
90 h

Elektronik (Lecture)

Workload descriptionMultiplierHoursTotal
Homework24 h8 h
Poster production17 h7 h
Attendance time152 h30 h
Preparation/post-processing + exam preparation153 h45 h
90 h

Elektronik (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Preparation/post-processing, exam preparation and poster presentation154 h60 h
90 h

The workload of the module adds up to 270 hours. The module therefore comprises 9 credit points.

Description of teaching and learning methods

The module is carried out in the form of lectures, exercises and practicals. In the exercise, selected contents of the lecture are deepened and calculated, and reference is made to programmes for professional dimensioning and validation of the design. The practical course serves to expand and practically deepen the lecture and exercise material.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Knowledge of the modules ‘Electrical Networks’, ‘Circuit Technology’, ‘Microprocessor Technology’ and ‘Integral Transformations and Partial Differential Equations’ is assumed.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
(Deliverable assessment) Homework15written2 homework assignments of about 2 pages each, to be prepared after the first and second 1/3 of the semester
(Deliverable assessment) Poster presentation15written1 poster in DIN A2 format on a selected topic from the lecture and exercise and present it in a poster presentation
(Deliverable assessment) Written elaboration of the internship dates30writtenompany work: 4 minutes of 5-10 pages each
(Examination) written exam40written60 minutes

Exam description

The overall grade according to § 47 (2) AllgStuPO is determined according to the grade scale 2 of Faculty IV.

Written test on the contents of the VL and UE: The subject knowledge conveyed in the VL and UE is tested. In principle, all the material presented is relevant to the examination, except for content explicitly stated otherwise. The examination time is 60 minutes; no aids are permitted; paper and scribbles are provided by us; use document-proof writing materials (not red-coloured).
Homework on the content of lectures and exercises (two, one after the first and one after the second third of the semester). The assignments are to be submitted within study groups of 2-3 students.
Design and presentation of a self-selected topic from the lecture and exercise, presented in a poster session at the end of the semester. The poster should be created in a group of 2-3 students.
Written elaboration of the practical sessions: The detailed elaboration of the laboratory experiments will be examined. This should document all boundary parameters, the procedure and results, including justification of unexpected results if applicable. A 5- to 10-page report must be submitted for each task sheet by the following date at the latest.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 36.

Registration procedures

Eine Anmeldung zur Durchführung des Moduls ist in ISIS unbedingt erforderlich. Die Anmeldung zur Modulprüfung erfolgt über MTS bis spätestens dem 30.11. im WS.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – In der ersten VL bekanntgegeben.

Recommended literature

  • Franco, S.: Design with Operational Amplifiers and Analog Integrated Circuits. McGraw Hill , 2014
  • Tietze, U. Schenk, C.: Halbleiter-Schaltungstechnik, Springer-Verlag, Berlin, 2016

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Computer Engineering
Computer Engineering (B. Sc.) - StuPO 2015
WS 2025/26Wahlpflichtbereich › Automatisierungstechnik
SS 2026Wahlpflichtbereich › Elektronik und Informationstechnik
Electrical Engineering
Electrical Engineering (B. Sc.) - StuPO 2015
WS 2025/26Wahlpflicht Elektronik und Informationstechnik › Wahlpflicht Elektronik und Informationstechnik Katalog A
SS 2026Wahlpflicht Elektrische Energietechnik › Wahlpflicht Elektrische Energietechnik Katalog B
Electrical Engineering and Information Technology (Q-Master ET/IT, teacher training)
Anlage 3 - StuPO 2016
WS 2025/26Fachwissenschaftlicher Wahlpflichtbereich
SS 2026Fachwissenschaftlicher Wahlpflichtbereich
Electrical Engineering and Information Technology (Q-Master ET/IT, teacher training)
StuPO 2016
WS 2025/26Fachwissenschaftlicher Wahlpflichtbereich
SS 2026Fachwissenschaftlicher Wahlpflichtbereich
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen › Elektrotechnik (ET) › Elektrotechnik (Wahlpflicht)
SS 2026Ingenieurwissenschaftliche Studienrichtungen › Elektrotechnik (ET) › Elektrotechnik (Wahlpflicht)
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
Information Technology (teacher training)
Kernfach StuPO 2016
WS 2025/26Fachwissenschaftlicher Wahlpflichtbereich
SS 2026Fachwissenschaftlicher Wahlpflichtbereich
Information Technology (teacher training)
Kernfach StuPO 2016
WS 2025/26Fachwissenschaft › Fachwissenschaftlicher Wahlpflichtbereich
SS 2026Fachwissenschaft › Fachwissenschaftlicher Wahlpflichtbereich
Information Technology (teacher training)
Zweitfach StuPO 2016
WS 2025/26Fachwissenschaftlicher Wahlpflichtbereich
SS 2026Fachwissenschaftlicher Wahlpflichtbereich
Information Technology (teacher training)
Zweitfach StuPO 2016
WS 2025/26Fachwissenschaft › Fachwissenschaftlicher Wahlpflichtbereich
SS 2026Fachwissenschaft › Fachwissenschaftlicher Wahlpflichtbereich
Technomathematics
Technomathematics (B. Sc.) - StuPO 2014
WS 2025/26Studienrichtungen › Technisches Gebiet - Elektrotechnik › Technisches Gebiet - Elektrotechnik › Katalog Elektronik und Informationstechnik
SS 2026Studienrichtungen › Technisches Gebiet - Elektrotechnik › Technisches Gebiet - Elektrotechnik › Katalog Elektronik und Informationstechnik
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
WS 2025/26Studienrichtungen › Elektrotechnik › Elektrotechnik › Katalog Elektronik und Informationstechnik (Bachelor ET)
SS 2026Studienrichtungen › Elektrotechnik › Elektrotechnik › Katalog Elektronik und Informationstechnik (Bachelor ET)

Miscellaneous

Am dazugehörige Praktikum kann nur nach oder parallel zum Besuchen der VL und Übung teilgenommen werden.