Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Introduction in Automotive ElectronicsModule description #40417 / Version 11

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v15)
Module / Version#40417 / #11
ValidityWinter semester 2022/23 – Summer semester 2024
Available language(s)German
Credit points6
Person responsible for the moduleGühmann, Clemens
GradingGraded
Exam formatWritten exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311600 FG Elektronische Mess- und Diagnosetechnik

Contact

OfficeEN 13
Contact personHeinze, Ewa
E-mail addressewa.heinze@tu-berlin.de
Websitehttp://www.mdt.tu-berlin.de

Learning outcomes

Significant technological advancements and changes in motor vehicles have been made possible recently by the increase in electrics and electronics, the networking of components and the expansion of functionality through software. After completing the module, students will have knowledge of the most important electronic components (hardware and software) of a vehicle. Furthermore, after completing the module, students can design a measurement chain for digitizing analogue sensor signals, can design a standard automotive controller and develop model-based ECU functions using Simulink/Stateflow.

Content

The lecture "Introduction to Automotive Electronics" is divided into two sections. In the first section, the basics of automotive electronics are presented. Sensors, actuators, amplifiers, filters and other electronic and electrical components, bus systems, electronic control units and the software structures of the control units are dealt with. The model-based development process is also dealt with. Subsequently, exemplary electronic systems of a vehicle are treated.

The practical course "Modelling and ECU Optimization in Automotive Electronics" focuses on the application of model-based development of automotive ECUs. In the so-called model-in-the-loop simulation, a function for controlling e.g. a transmission is designed, tested and optimized using MATLAB/Simulink.

In the integrated course "Automatic Control in Automotive Mechatronics" the focus is on the design of control and regulation of mechatronic systems. The course has a lecture part in which the theory of design is taught. In the subsequent practical phase, a controller is designed based on a model using a concrete, real system (e.g. throttle valve actuator), the implementation is carried out on a microcontroller and then tested.

In addition to the material taught in the lecture, students can develop a practical simulation for ECU testing or optimization in a group project or create a model of a mechatronic system if the small project Simulation and Technical Diagnosis is selected in the elective course.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Einführung in die AutomobilelektronikLecture0430 L 320 Winter semester–2 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Kleines Projekt Simulation und Technische DiagnoseProject0430 L 331 –2 ISIS
Modellbildung und Steuergeräteoptimierung in der AutomobilelektronikInternship0430 L 322 Winter semester[de]2 ISIS
Regelung und Steuerung in der KraftfahrzeugmechatronikIntegrated course Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (3)

Einführung in die Automobilelektronik (Lecture) 1

All groups of this course in the catalog

Kleines Projekt Simulation und Technische Diagnose (Project) 2

All groups of this course in the catalog

Workload and credit points

Einführung in die Automobilelektronik (Lecture)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Kleines Projekt Simulation und Technische Diagnose (Project)

Workload descriptionMultiplierHoursTotal
Aufgabenbearbeitung182 h82 h
Präsenzzeit24 h8 h
90 h

Modellbildung und Steuergeräteoptimierung in der Automobilelektronik (Internship)

Workload descriptionMultiplierHoursTotal
Aufgabenbearbeitung240 h80 h
Präsenzzeit52 h10 h
90 h

Regelung und Steuerung in der Kraftfahrzeugmechatronik (Integrated course)

Workload descriptionMultiplierHoursTotal
Bearbeitung der Praktikumsaufgaben418 h72 h
Präsenzzeit92 h18 h
90 h

The workload of the module adds up to 360 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

- Lectures (VL): Frontal Lecture
- Lab (PR): independent processing of tasks
- Project (PJ): independent processing in group work
- Integrated course (IV): Frontal lecture and independent processing of tasks.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Basic knowledge of Simulink® / Matlab®

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatWritten exam
LanguageGerman
Duration/Extent90 min

Exam description

Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)

Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 42.

Registration procedures

The chosen elective course (from Wahlpflichtbereich) must be passed to attend the exam "Introduction to Automotive Electronics" (Einführung in die Automobilelektronik).
Registration for the lab is via the corresponding ISIS page.
The number of participants in the lab is limited to 32 students.
If there are too many registrations, the places will be raffled according to the regulations of the TU (OTU).

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – http://www.mdt.tu-berlin.de

Recommended literature

  • Bosch: Kraftfahrtechnisches Taschenbuch Wiesbaden, Vieweg Verlag. 2014
  • Tschöke, Helmut, et al., editors. Elektrifizierung des Antriebsstrangs: Grundlagen - vom Mikro-Hybrid zum vollelektrischen Antrieb. Springer Berlin Heidelberg, 2019, https://doi.org/10.1007/978-3-662-60356-7.
  • Reif, K. (Hrsg.): Automobilelektronik ATZ/MTZ-Fachbuch, 2014
  • Reif, K. (Hrsg.): Sensoren im Kraftfahrzeug. Springer Vieweg. 2012
  • Reif, K. (Hrsg.): Busssysteme. Springer Vieweg 2012
  • Reif, K. (Hrsg.): Ottomotor-Management: Steuerung, Regelung und Überwachung (Bosch Fachinformation Automobil), Springer-Vieweg Verlag 2015
  • Reif, K. (Hrsg.): Dieselmotor-Management: Systeme, Komponenten, Steuerung und Regelung (Bosch Fachinformation Automobil),, Springer-Vieweg Verlag 2012
  • Robert Bosch GmbH: Automotive Electrics and Automotive Electronics. 5 th Edition. Springer Vieweg 2007
  • Ribbens, W.: Understanding Automotive Electronics. Elsevier. 2013
  • Zimmermann, W.; Schmidgall, R.: Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
  • Wallentowitz, H.; Reif, K.:Handbuch der Kraftfahrzeugelektronik. Grundlagen, Komponenten, Systeme und Anwendungen Vieweg ATZ/MTZ-Fachbuch, 2006
  • Krüger, M.: Grundlagen der Kfz-Elektronik, Hanser-Verlag, 2014
  • Bosch: Autoelektrik - Autoelektronik. Systeme und Komponenten, 5. Auflage 2007
  • Kiencke, U., Nielsen, L.: Automotive Control Systems for Engine, Driveline and Vehicle, 2nd Edition, Springer-Verlag Berlin-Heidelberg 2005
  • Elektronik in der Fahrzeugtechnik: Hardware, Software, Systeme und Projektmanagement (ATZ/MTZ-Fachbuch)
  • P. Scholz: Softwareentwicklung eingebetteter Systeme
  • Schäuffele, J.; Zurawka, T. Automotive Software Engineering. Grundlagen, Prozesse, Methoden und Werkzeuge effizient einsetzen. 6. Auflage. Vieweg ATZ/MTZ-Fachbuch. 2016
  • J. Wietzke, J.; Tran, M.T: Automotive Embedded Systeme
  • Zimmermann, W.; Schmidgall, R.:Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2022/23Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
SS 2023Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
WS 2023/24Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
SS 2024Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
Master Automotive Systems
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (teaching profession)

Miscellaneous

The lab can only be offered if enough scientific staff is available.