Introduction in Automotive ElectronicsModule description #40417 / Version 6
- 6 CP
- Written exam
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v15)
| Module / Version | #40417 / #6 |
|---|---|
| Validity | SS 2018 – WS 2018/19 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gühmann, Clemens |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311600 FG Elektronische Mess- und Diagnosetechnik |
Contact
| Office | EN 13 |
|---|---|
| Contact person | Heinze, Ewa |
| E-mail address | ewa.heinze@tu-berlin.de |
| Website | http://www.mdt.tu-berlin.de |
Learning outcomes
Significant technological developments and changes in motor vehicles were enabled in recent years through the increase in electrical and electronic systems by networking components and the functionality extension by software. After having completed the module, the students know the main electronic components (hardware and software) of a vehicle and have acquired skills to see the vehicle as an overall system. Further, they are able to develope control unit functions based on models.
Content
The lecture is divided into two sections. In the first section the basics of automotive electronics are presented. Here, sensors, actuators, electronic and electrical components, bus systems, electronic control units and the software structure of the control units are treated. Further we discuss a vehicle's exemplary electronic system. In the lab ("Praktikum") "modeling and control unit optimization in automotive electronics", the use of models in the optimization process of automotive contol units is of prime importance. For this purpose, we create a transmission control and discuss the control and regulation of engine components.
The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.
The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Einführung in die Automobilelektronik | Lecture | 0430 L 320 | Winter semester | – | 2 | WS 2026/27 (1) ISIS |
| Modellbildung und Steuergeräteoptimierung in der Automobilelektronik | Internship | 0430 L 322 | Winter semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Einführung in die Automobilelektronik (Lecture) 1
- Einführung in die Automobilelektronik (Vorlesung) Termingruppe 1 0430 L 320
Workload and credit points
Einführung in die Automobilelektronik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
Modellbildung und Steuergeräteoptimierung in der Automobilelektronik (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 2 | 8 h | 16 h |
| Protokolle | 1 | 58 h | 58 h |
| Vor- und Nachbearbeitung | 2 | 8 h | 16 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
- Vorlesungen (VL): Frontalvortrag
- Praktikum (PR): eigenständige Bearbeitung von Aufgaben.
- Praktikum (PR): eigenständige Bearbeitung von Aufgaben.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Grundkenntnisse in Simulink®/Matlab®
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 90 min |
Exam description
Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)
Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)
Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 32.
Registration procedures
Die Anmeldung zum Praktikum erfolgt elektronisch über die Fachgebietsseite. Siehe auch:
http://www.mdt.tu-berlin.de/menue/lehre/modellbildung_und_steuergeraeteoptimierung_in_der_automobilelektronik/
Bei zuvielen Anmeldungen werden die 32 Praktikumsplätze gemäß der Ordung der TU (OTU) verlost.
http://www.mdt.tu-berlin.de/menue/lehre/modellbildung_und_steuergeraeteoptimierung_in_der_automobilelektronik/
Bei zuvielen Anmeldungen werden die 32 Praktikumsplätze gemäß der Ordung der TU (OTU) verlost.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.mdt.tu-berlin.de
Recommended literature
- Bosch: Autoelektrik - Autoelektronik. Systeme und Komponenten, 5. Auflage 2007
- Bosch: Autoelektrik - Autoelektronik am Ottomotor VDI-Verlag, 1994
- Bosch: Diesel-Motormangement, 4. Auflage, Wiesbaden, Vieweg Verlag 2004
- Bosch: Kraftfahrtechnisches Taschenbuch., 25. Auflage, Wiesbaden, Vieweg Verlag, 2004
- Bosch: Otto-Motormangement, 3. Auflage, Wiesbaden, Vieweg Verlag 2005
- Kiencke, U., Nielsen, L.: Automotive Control Systems for Engine, Driveline and Vehicle, 2nd Edition, Springer-Verlag Berlin-Heidelberg 2005
- Krüger, M.: Grundlagen der Kfz-Elektronik, Hanser-Verlag, 2004
- Reif, K.: Automobilelektronik ATZ/MTZ-Fachbuch, 2006
- Röpke, K.; et al.: DoE - Design of Experiments. Verlag Moderne Industrie 2005
- Wallentowitz, H.; Reif, K.:Handbuch der Kraftfahrzeugelektronik. Grundlagen, Komponenten, Systeme und Anwendungen Vieweg ATZ/MTZ-Fachbuch, 2006
- Zimmermann, W.; Schmidgall, R.:Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
Assigned programs
This module is not used in any program.
Master Automotive Systems
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (Lehramtsbezogen)
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (Lehramtsbezogen)
Miscellaneous
Das Praktikum kann nur bei ausreichenden Ausstattung (wissenschaftliche Mitarbeiter) angeboten werden.