Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Introduction in Automotive ElectronicsModule description #40417 / Version 7

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v15)
Module / Version#40417 / #7
ValiditySS 2019 – SS 2019
Available language(s)German
Credit points6
Person responsible for the moduleGühmann, Clemens
GradingGraded
Exam formatWritten exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311600 FG Elektronische Mess- und Diagnosetechnik

Contact

OfficeEN 13
Contact personHeinze, Ewa
E-mail addressewa.heinze@tu-berlin.de
Websitehttp://www.mdt.tu-berlin.de

Learning outcomes

Significant technological developments and changes in motor vehicles were enabled in recent years through the increase in electrical and electronic systems by networking components and the functionality extension by software. After having completed the module, the students know the main electronic components (hardware and software) of a vehicle and have acquired skills to see the vehicle as an overall system. Further, they are able to develope control unit functions based on models.

Content

The lecture is divided into two sections. In the first section the basics of automotive electronics are presented. Here, sensors, actuators, electronic and electrical components, bus systems, electronic control units and the software structure of the control units are treated. Further we discuss a vehicle's exemplary electronic system. In the lab ("Praktikum") "modeling and control unit optimization in automotive electronics", the use of models in the optimization process of automotive contol units is of prime importance. For this purpose, we create a transmission control and discuss the control and regulation of engine components.

The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Einführung in die AutomobilelektronikLecture0430 L 320 Winter semester–2 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Automotive Software EngineeringLecture0432 L 0771 Summer semester–2 ISIS
Kleines Projekt Simulation und Technische DiagnoseProject0430 L 331 –2 ISIS
Modellbildung und Steuergeräteoptimierung in der AutomobilelektronikInternship0430 L 322 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (3)

Einführung in die Automobilelektronik (Lecture) 1

All groups of this course in the catalog

Kleines Projekt Simulation und Technische Diagnose (Project) 2

All groups of this course in the catalog

Workload and credit points

Einführung in die Automobilelektronik (Lecture)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Automotive Software Engineering (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Kleines Projekt Simulation und Technische Diagnose (Project)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Modellbildung und Steuergeräteoptimierung in der Automobilelektronik (Internship)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

The workload of the module adds up to 360 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

- Vorlesungen (VL): Frontalvortrag
- Praktikum (PR): eigenständige Bearbeitung von Aufgaben.
- Projekt (PJ): eigentständige Bearbeitung in Gruppenarbeit

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Grundkenntnisse in Simulink®/Matlab®

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatWritten exam
LanguageGerman
Duration/Extent90 min

Exam description

Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)

Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 32.

Registration procedures

Die gewählte Veranstaltung des Wahlpflichtbereiches muss bestanden werden, um an der Klausur "Einführung in die Automobilelektronik" teilzunehmen.

Die Anmeldung zum Praktikum erfolgt elektronisch über die Fachgebietsseite. Siehe auch:
http://www.mdt.tu-berlin.de/menue/lehre/modellbildung_und_steuergeraeteoptimierung_in_der_automobilelektronik/

Die Teilnehmeranzahl im Praktikum ist auf 32 Studierende begrenzt.
Die Teilnehmeranzahl in der Vorlesung Automotive Software Engineering ist auf 15 Studierende begrenzt.

Bei zuvielen Anmeldungen werden die 32 Praktikumsplätze gemäß der Ordung der TU (OTU) verlost.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – http://www.mdt.tu-berlin.de

Recommended literature

  • Bosch: Kraftfahrtechnisches Taschenbuch Wiesbaden, Vieweg Verlag. 2014
  • Reif, K. (Hrsg.): Automobilelektronik ATZ/MTZ-Fachbuch, 2014
  • Reif, K. (Hrsg.): Sensoren im Kraftfahrzeug. Springer Vieweg. 2012
  • Reif, K. (Hrsg.): Busssysteme. Springer Vieweg 2012
  • Reif, K. (Hrsg.): Ottomotor-Management: Steuerung, Regelung und Überwachung (Bosch Fachinformation Automobil), Springer-Vieweg Verlag 2015
  • Reif, K. (Hrsg.): Dieselmotor-Management: Systeme, Komponenten, Steuerung und Regelung (Bosch Fachinformation Automobil),, Springer-Vieweg Verlag 2012
  • Robert Bosch GmbH: Automotive Electrics and Automotive Electronics. 5 th Edition. Springer Vieweg 2007
  • Ribbens, W.: Understanding Automotive Electronics. Elsevier. 2013
  • Zimmermann, W.; Schmidgall, R.: Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
  • Wallentowitz, H.; Reif, K.:Handbuch der Kraftfahrzeugelektronik. Grundlagen, Komponenten, Systeme und Anwendungen Vieweg ATZ/MTZ-Fachbuch, 2006
  • Krüger, M.: Grundlagen der Kfz-Elektronik, Hanser-Verlag, 2014
  • Bosch: Autoelektrik – Autoelektronik. Systeme und Komponenten, 5. Auflage 2007
  • Kiencke, U., Nielsen, L.: Automotive Control Systems for Engine, Driveline and Vehicle, 2nd Edition, Springer-Verlag Berlin-Heidelberg 2005
  • Elektronik in der Fahrzeugtechnik: Hardware, Software, Systeme und Projektmanagement (ATZ/MTZ-Fachbuch)
  • Röpke, K.: DoE - Design of Experiments. Methoden und Anwendungen in der Motorentwicklung. Süddeutscher Verlag onpact. 2014
  • P. Scholz: Softwareentwicklung eingebetteter Systeme
  • Schäuffele, J.; Zurawka, T. Automotive Software Engineering. Grundlagen, Prozesse, Methoden und Werkzeuge effizient einsetzen. 6. Auflage. Vieweg ATZ/MTZ-Fachbuch. 2016
  • J. Wietzke, J.; Tran, M.T: Automotive Embedded Systeme
  • Zimmermann, W.; Schmidgall, R.:Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006

Assigned programs

This module is not used in any program.

Master Automotive Systems
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (Lehramtsbezogen)

Miscellaneous

Das Praktikum kann nur bei ausreichenden Ausstattung (wissenschaftliche Mitarbeiter) angeboten werden.