Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Introduction in Automotive ElectronicsModule description #40417 / Version 8

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v15)
Module / Version#40417 / #8
ValidityWS 2019/20 – Summer semester 2020
Available language(s)German
Credit points6
Person responsible for the moduleGühmann, Clemens
GradingGraded
Exam formatWritten exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311600 FG Elektronische Mess- und Diagnosetechnik

Contact

OfficeEN 13
Contact personHeinze, Ewa
E-mail addressewa.heinze@tu-berlin.de
Websitehttp://www.mdt.tu-berlin.de

Learning outcomes

Significant technological developments and changes in motor vehicles were enabled in recent years through the increase in electrical and electronic systems by networking components and the functionality extension by software. After having completed the module, the students know the main electronic components (hardware and software) of a vehicle and have acquired skills to see the vehicle as an overall system. Further, they are able to develope control unit functions based on models.

The students have an overview of automotive software engineering, specific knowledge in the areas of requirements management, test management, functional safety, product line management, model-based development and autonomous vehicles, as well as knowledge in the creation and management of requirements and test cases in the field of automotive software engineering.

Content

The lecture is divided into two sections. In the first section the basics of automotive electronics are presented. Here, sensors, actuators, electronic and electrical components, bus systems, electronic control units and the software structure of the control units are treated. Further we discuss a vehicle's exemplary electronic system. In the lab ("Praktikum") "modeling and control unit optimization in automotive electronics", the use of models in the optimization process of automotive contol units is of prime importance. For this purpose, we create a transmission control and discuss the control and regulation of engine components.

The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.

The lecture "Automotive Software Engineering" deals with the development process of software in automobiles. The core processes requirements engineering, functional design, logical system architecture, technical implementation and test-based protection are introduced. There are also important cross-cutting issues such as safety and variant management. Each lecture will be accompanied by examples and practical exercises, which will be created interactively during the lecture.

In addition to the material transfer in the lecture, the students can develop in a group work in the project a practical simulation for ECU test or optimization or create a model of a mechatronic system, if in the elective area the small project Simulation and Technical Diagnosis is chosen.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Einführung in die AutomobilelektronikLecture0430 L 320 Winter semester–2 ISIS

Compulsory elective area

A selection of the following courses must be completed:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Automotive Software EngineeringLecture0432 L 0771 Summer semester–2 ISIS
Kleines Projekt Simulation und Technische DiagnoseProject0430 L 331 –2 ISIS
Modellbildung und Steuergeräteoptimierung in der AutomobilelektronikInternship0430 L 322 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (3)

Einführung in die Automobilelektronik (Lecture) 1

All groups of this course in the catalog

Kleines Projekt Simulation und Technische Diagnose (Project) 2

All groups of this course in the catalog

Workload and credit points

Einführung in die Automobilelektronik (Lecture)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Automotive Software Engineering (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Kleines Projekt Simulation und Technische Diagnose (Project)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Modellbildung und Steuergeräteoptimierung in der Automobilelektronik (Internship)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

The workload of the module adds up to 360 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

- Lectures (VL): Frontal Lecture
- Lab (PR): independent processing of tasks
- Project (PJ): independent processing in group work

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Basic knowledge of Simulink® / Matlab®

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatWritten exam
LanguageGerman
Duration/Extent90 min

Exam description

Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)

Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 32.

Registration procedures

The chosen elective course (from Wahlpflichtbereich) must be passed in order to attend the exam "Introduction to Automotive Electronics" (Einführung in die Automobilelektronik).

Registration for the lab is via the corresponding ISIS page.

The number of participants in the lab is limited to 32 students.
The number of participants in the lecture Automotive Software Engineering is limited to 15 students.

If there are too many registrations, the places will be raffled according to the regulations of the TU (OTU).

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – http://www.mdt.tu-berlin.de

Recommended literature

  • Bosch: Kraftfahrtechnisches Taschenbuch Wiesbaden, Vieweg Verlag. 2014
  • Reif, K. (Hrsg.): Automobilelektronik ATZ/MTZ-Fachbuch, 2014
  • Reif, K. (Hrsg.): Sensoren im Kraftfahrzeug. Springer Vieweg. 2012
  • Reif, K. (Hrsg.): Busssysteme. Springer Vieweg 2012
  • Reif, K. (Hrsg.): Ottomotor-Management: Steuerung, Regelung und Überwachung (Bosch Fachinformation Automobil), Springer-Vieweg Verlag 2015
  • Reif, K. (Hrsg.): Dieselmotor-Management: Systeme, Komponenten, Steuerung und Regelung (Bosch Fachinformation Automobil),, Springer-Vieweg Verlag 2012
  • Robert Bosch GmbH: Automotive Electrics and Automotive Electronics. 5 th Edition. Springer Vieweg 2007
  • Ribbens, W.: Understanding Automotive Electronics. Elsevier. 2013
  • Zimmermann, W.; Schmidgall, R.: Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
  • Wallentowitz, H.; Reif, K.:Handbuch der Kraftfahrzeugelektronik. Grundlagen, Komponenten, Systeme und Anwendungen Vieweg ATZ/MTZ-Fachbuch, 2006
  • Krüger, M.: Grundlagen der Kfz-Elektronik, Hanser-Verlag, 2014
  • Bosch: Autoelektrik – Autoelektronik. Systeme und Komponenten, 5. Auflage 2007
  • Kiencke, U., Nielsen, L.: Automotive Control Systems for Engine, Driveline and Vehicle, 2nd Edition, Springer-Verlag Berlin-Heidelberg 2005
  • Elektronik in der Fahrzeugtechnik: Hardware, Software, Systeme und Projektmanagement (ATZ/MTZ-Fachbuch)
  • Röpke, K.: DoE - Design of Experiments. Methoden und Anwendungen in der Motorentwicklung. Süddeutscher Verlag onpact. 2014
  • P. Scholz: Softwareentwicklung eingebetteter Systeme
  • Schäuffele, J.; Zurawka, T. Automotive Software Engineering. Grundlagen, Prozesse, Methoden und Werkzeuge effizient einsetzen. 6. Auflage. Vieweg ATZ/MTZ-Fachbuch. 2016
  • J. Wietzke, J.; Tran, M.T: Automotive Embedded Systeme
  • Zimmermann, W.; Schmidgall, R.:Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2020Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems
Master Automotive Systems
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (teaching profession)

Miscellaneous

The lab can only be offered if enough scientific staff is available.