Introduction in Automotive ElectronicsModule description #40417 / Version 9
- 6 CP
- Written exam
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v15)
| Module / Version | #40417 / #9 |
|---|---|
| Validity | Winter semester 2020/21 – Winter semester 2020/21 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gühmann, Clemens |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311600 FG Elektronische Mess- und Diagnosetechnik |
Contact
| Office | EN 13 |
|---|---|
| Contact person | Heinze, Ewa |
| E-mail address | ewa.heinze@tu-berlin.de |
| Website | http://www.mdt.tu-berlin.de |
Learning outcomes
Significant technological developments and changes in motor vehicles were enabled in recent years through the increase in electrical and electronic systems by networking components and the functionality extension by software. After having completed the module, the students know the main electronic components (hardware and software) of a vehicle and have acquired skills to see the vehicle as an overall system. Further, they are able to develope control unit functions based on models.
The students have an overview of automotive software engineering, specific knowledge in the areas of requirements management, test management, functional safety, product line management, model-based development and autonomous vehicles, as well as knowledge in the creation and management of requirements and test cases in the field of automotive software engineering.
The students have an overview of automotive software engineering, specific knowledge in the areas of requirements management, test management, functional safety, product line management, model-based development and autonomous vehicles, as well as knowledge in the creation and management of requirements and test cases in the field of automotive software engineering.
Content
The lecture is divided into two sections. In the first section the basics of automotive electronics are presented. Here, sensors, actuators, electronic and electrical components, bus systems, electronic control units and the software structure of the control units are treated. Further we discuss a vehicle's exemplary electronic system. In the lab ("Praktikum") "modeling and control unit optimization in automotive electronics", the use of models in the optimization process of automotive contol units is of prime importance. For this purpose, we create a transmission control and discuss the control and regulation of engine components.
The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.
The lecture "Automotive Software Engineering" deals with the development process of software in automobiles. The core processes requirements engineering, functional design, logical system architecture, technical implementation and test-based protection are introduced. There are also important cross-cutting issues such as safety and variant management. Each lecture will be accompanied by examples and practical exercises, which will be created interactively during the lecture.
In addition to the material transfer in the lecture, the students can develop in a group work in the project a practical simulation for ECU test or optimization or create a model of a mechatronic system, if in the elective area the small project Simulation and Technical Diagnosis is chosen.
The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.
The lecture "Automotive Software Engineering" deals with the development process of software in automobiles. The core processes requirements engineering, functional design, logical system architecture, technical implementation and test-based protection are introduced. There are also important cross-cutting issues such as safety and variant management. Each lecture will be accompanied by examples and practical exercises, which will be created interactively during the lecture.
In addition to the material transfer in the lecture, the students can develop in a group work in the project a practical simulation for ECU test or optimization or create a model of a mechatronic system, if in the elective area the small project Simulation and Technical Diagnosis is chosen.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Einführung in die Automobilelektronik | Lecture | 0430 L 320 | Winter semester | – | 2 | WS 2026/27 (1) ISIS |
Compulsory elective area
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Kleines Projekt Simulation und Technische Diagnose | Project | 0430 L 331 | – | 2 | WS 2026/27 (2) ISIS | |
| Modellbildung und Steuergeräteoptimierung in der Automobilelektronik | Internship | 0430 L 322 | Winter semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (3)
Einführung in die Automobilelektronik (Lecture) 1
- Einführung in die Automobilelektronik (Vorlesung) Termingruppe 1 0430 L 320
Kleines Projekt Simulation und Technische Diagnose (Project) 2
- Kleines Projekt Simulation und Technische Diagnose (Projekt) Einführungsveranstaltung 0430 L 331
- Kleines Projekt Simulation und Technische Diagnose (Projekt) Termingruppe 1 0430 L 331
Workload and credit points
Einführung in die Automobilelektronik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
Kleines Projekt Simulation und Technische Diagnose (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Modellbildung und Steuergeräteoptimierung in der Automobilelektronik (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
- Lectures (VL): Frontal Lecture
- Lab (PR): independent processing of tasks
- Project (PJ): independent processing in group work
- Lab (PR): independent processing of tasks
- Project (PJ): independent processing in group work
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of Simulink® / Matlab®
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 90 min |
Exam description
Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)
Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
* Vorlesung (50 Portfoliopunkte)
* Praktikum (insgesamt 50)
Im Rahmen des Praktikums sind verschiedene Studienleistungen zu erbringen. Ihre
Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 32.
Registration procedures
The chosen elective course (from Wahlpflichtbereich) must be passed in order to attend the exam "Introduction to Automotive Electronics" (Einführung in die Automobilelektronik).
Registration for the lab is via the corresponding ISIS page.
The number of participants in the lab is limited to 32 students.
The number of participants in the lecture Automotive Software Engineering is limited to 15 students.
If there are too many registrations, the places will be raffled according to the regulations of the TU (OTU).
Registration for the lab is via the corresponding ISIS page.
The number of participants in the lab is limited to 32 students.
The number of participants in the lecture Automotive Software Engineering is limited to 15 students.
If there are too many registrations, the places will be raffled according to the regulations of the TU (OTU).
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.mdt.tu-berlin.de
Recommended literature
- Bosch: Kraftfahrtechnisches Taschenbuch Wiesbaden, Vieweg Verlag. 2014
- Reif, K. (Hrsg.): Automobilelektronik ATZ/MTZ-Fachbuch, 2014
- Reif, K. (Hrsg.): Sensoren im Kraftfahrzeug. Springer Vieweg. 2012
- Reif, K. (Hrsg.): Busssysteme. Springer Vieweg 2012
- Reif, K. (Hrsg.): Ottomotor-Management: Steuerung, Regelung und Überwachung (Bosch Fachinformation Automobil), Springer-Vieweg Verlag 2015
- Reif, K. (Hrsg.): Dieselmotor-Management: Systeme, Komponenten, Steuerung und Regelung (Bosch Fachinformation Automobil),, Springer-Vieweg Verlag 2012
- Robert Bosch GmbH: Automotive Electrics and Automotive Electronics. 5 th Edition. Springer Vieweg 2007
- Ribbens, W.: Understanding Automotive Electronics. Elsevier. 2013
- Zimmermann, W.; Schmidgall, R.: Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
- Wallentowitz, H.; Reif, K.:Handbuch der Kraftfahrzeugelektronik. Grundlagen, Komponenten, Systeme und Anwendungen Vieweg ATZ/MTZ-Fachbuch, 2006
- Krüger, M.: Grundlagen der Kfz-Elektronik, Hanser-Verlag, 2014
- Bosch: Autoelektrik – Autoelektronik. Systeme und Komponenten, 5. Auflage 2007
- Kiencke, U., Nielsen, L.: Automotive Control Systems for Engine, Driveline and Vehicle, 2nd Edition, Springer-Verlag Berlin-Heidelberg 2005
- Elektronik in der Fahrzeugtechnik: Hardware, Software, Systeme und Projektmanagement (ATZ/MTZ-Fachbuch)
- Röpke, K.: DoE - Design of Experiments. Methoden und Anwendungen in der Motorentwicklung. Süddeutscher Verlag onpact. 2014
- P. Scholz: Softwareentwicklung eingebetteter Systeme
- Schäuffele, J.; Zurawka, T. Automotive Software Engineering. Grundlagen, Prozesse, Methoden und Werkzeuge effizient einsetzen. 6. Auflage. Vieweg ATZ/MTZ-Fachbuch. 2016
- J. Wietzke, J.; Tran, M.T: Automotive Embedded Systeme
- Zimmermann, W.; Schmidgall, R.:Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2020/21 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electronics & Integrated Systems |
Master Automotive Systems
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (teaching profession)
Master Fahrzeugtechnik
B.Sc. Fahrzeugtechnik (teaching profession)
Miscellaneous
The lab can only be offered if enough scientific staff is available.