Simulation and technical diagnostics (applications)Module description #40768 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v4)
| Module / Version | #40768 / #3 |
|---|---|
| Validity | WS 2019/20 – Summer semester 2024 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gühmann, Clemens |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311600 FG Elektronische Mess- und Diagnosetechnik |
Contact
| Office | EN 13 |
|---|---|
| Contact person | Beyer, Christine |
| E-mail address | clemens.guehmann@tu-berlin.de |
| Website | http://www.tu-berlin.de |
Learning outcomes
After having completed the module, students are able to solve practical problems in the fields of pattern recognition and modeling / simulation. If the project is chosen as a compulsory elective, the students will also be able to develop, simulate and apply complex models of mechatronic systems using the object-oriented modeling language Modelica or, under Simulink. After attending the seminar, the students are able to conduct a literature research on a specific research topic, summarize the results scientifically and then present and defend in a lecture.
Content
The lab "Pattern Recognition and Technical Diagnostics" (Praktikum Mustererkennung und Technische Diagnose) deepens the contents of the lecture "Pattern Recognition and Technical Diagnostics" (module Simulation and Technical Diagnostics), where practical problems are solved: classification of electric motors.
The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.
In the seminar results of new research on the field of measurement and diagnostic thechnology, modeling and simulation are recited in presentations and papers. The main focus lies on vehicle and engine development.
The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.
In the seminar results of new research on the field of measurement and diagnostic thechnology, modeling and simulation are recited in presentations and papers. The main focus lies on vehicle and engine development.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Mustererkennung und Technische Diagnose | Internship | 0430 L 341 | Summer semester | – | 2 | ISIS |
Compulsory elective area
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Kleines Projekt Simulation und Technische Diagnose | Project | 0430 L 331 | – | 2 | WS 2026/27 (2) ISIS | |
| Seminar Mess- und Diagnosetechnik | Seminar | 0430 L 652 | Winter and summer semester | – | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Kleines Projekt Simulation und Technische Diagnose (Project) 2
- Kleines Projekt Simulation und Technische Diagnose (Projekt) Einführungsveranstaltung 0430 L 331
- Kleines Projekt Simulation und Technische Diagnose (Projekt) Termingruppe 1 0430 L 331
Workload and credit points
Mustererkennung und Technische Diagnose (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 8 | 2 h | 16 h |
| Protokolle | 1 | 58 h | 58 h |
| Vor- und Nachbearbeitung | 8 | 2 h | 16 h |
| 90 h | |||
Kleines Projekt Simulation und Technische Diagnose (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
Seminar Mess- und Diagnosetechnik (Seminar)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
- Lab (PR / Praktikum): autonomous processing of tasks
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Desirable conditions for participation in the courses:
Basics of measurement data processing, control engineering, basic electronics knowledge, knowledge in the programming language Python.
Participation in the lab "Pattern Recognition and Technical Diagnostics" (Praktikum Mustererkennung und Technische Diagnose) is only possible if the lecture "Pattern Recognition and Technical Diagnosis" is taken. The lecture takes place in the same semester as the lab.
Basics of measurement data processing, control engineering, basic electronics knowledge, knowledge in the programming language Python.
Participation in the lab "Pattern Recognition and Technical Diagnostics" (Praktikum Mustererkennung und Technische Diagnose) is only possible if the lecture "Pattern Recognition and Technical Diagnosis" is taken. The lecture takes place in the same semester as the lab.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points per element |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Ergebnisprüfung) PJ Kleines Projekt Simulation und Technische Diagnose - Abschlusspräsentation | 10 | oral | 20 min Vortrag - 10 min Fragen |
| (Ergebnisprüfung) PJ Kleines Projekt Simulation und Technische Diagnose - Ausarbeitung/Dokumentation | 40 | written | max. 15 Seiten Inhalt pro Person |
| (Ergebnisprüfung) PJ Kleines Projekt Simulation und Technische Diagnose - Entwickelte Hardware/Software | 40 | practical | 65 Stunden |
| (Ergebnisprüfung) SEM Seminar Mess- und Diagnosetechnik - Schriftliche Ausarbeitung | 80 | written | 6-8 Seiten im ieee Format |
| (Ergebnisprüfung) SEM Seminar Mess- und Diagnosetechnik - Vortrag | 20 | oral | 20 min Vortrag - 10 min Fragen |
| (Lernprozessevaluation) PJ Kleines Projekt Simulation und Technische Diagnose - Projektplanung | 10 | written | begleitend |
Exam description
The passing of the lab is a prerequisite for the completion of the module. It is not graded. The module grade results from the points of the project or the seminar.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 32.
Registration procedures
Registration for the lab takes place via the corresponding ISIS course.
The offered projects will be presented in the first lecture week (see course catalog).
Registration for the seminar is made via the MDT website at https://www.mdt.tu-berlin.de/menue/lehre/seminar_mess_und_diagnosetechnik/
The seminar is limited to 10 participants.
The offered projects will be presented in the first lecture week (see course catalog).
Registration for the seminar is made via the MDT website at https://www.mdt.tu-berlin.de/menue/lehre/seminar_mess_und_diagnosetechnik/
The seminar is limited to 10 participants.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified