Resource-saving Design against Stress and VibrationModule description #50170 / Version 6
- 6 CP
- Oral exam
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #50170 / #6 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Liebich, Robert |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351200 FG Konstruktion und Produktzuverlässigkeit |
Contact
| Office | H 66 |
|---|---|
| Contact person | Liebich, Robert |
| E-mail address | robert.liebich@tu-berlin.de |
| Website | https://www.tu.berlin/kup/studium-lehre/master/beanspruchungsgerechtes-und-ressourcenschonendes-konstruieren |
Learning outcomes
Knowledge of:
- Load and stress types
- structural dynamics
- Methods for calculating loads and stresses on structures
Skills:
- Dimensioning of components with equal boundary stress
- Vibration calculation and analysis
- Application of calculation methods for draft- and detail design
- Design of highly stressed components
- Design of components composed of several parts
Expertise:
- Ability to assess components with regard to loads and stresses
- Ability to formulate engineering design recommendations for all phases of the design process
- Confident and fast handling of the calculation methods learned
Students will be able to calculate and evaluate statically and dynamically highly stressed structures according to the state of the art and derive design recommendations for all phases of the design process.
- Load and stress types
- structural dynamics
- Methods for calculating loads and stresses on structures
Skills:
- Dimensioning of components with equal boundary stress
- Vibration calculation and analysis
- Application of calculation methods for draft- and detail design
- Design of highly stressed components
- Design of components composed of several parts
Expertise:
- Ability to assess components with regard to loads and stresses
- Ability to formulate engineering design recommendations for all phases of the design process
- Confident and fast handling of the calculation methods learned
Students will be able to calculate and evaluate statically and dynamically highly stressed structures according to the state of the art and derive design recommendations for all phases of the design process.
Content
Calculations and evaluations in the design process, design and stress determination
- Design of highly stressed components
- Lightweight design, volume utilization ratio
- Structural dynamics, eigenvalues and eigenmodes
- Calculation methods for the design (analytical methods)
- Calculation methods for detailed design (FEM)
- Design of highly stressed components
- Lightweight design, volume utilization ratio
- Structural dynamics, eigenvalues and eigenmodes
- Calculation methods for the design (analytical methods)
- Calculation methods for detailed design (FEM)
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Beanspruchungsgerechtes und ressourcenschonendes Konstruieren (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Beanspruchungsgerechtes und ressourcenschonendes Konstruieren (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The material presented in the lecture is applied and consolidated in the exercise in the context of analytical and numerical (FEM) example tasks. In homework assignments, students will apply the knowledge they have learned and practice calculation and evaluation.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Engineering Design 1 & 2, Statics and Elementary Strength of Materials , Kinematics and Dynamics
Mandatory prerequisites for module examination registration:
Performance record of “Resource-saving Design against Stress and Vibration” or “Design against Stress and Vibration”.
Mandatory prerequisites for module examination registration:
Performance record of “Resource-saving Design against Stress and Vibration” or “Design against Stress and Vibration”.
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | 30 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 100.
Registration procedures
ISIS and MOSES
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – www.kup.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 1. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik |
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| Engineering Science StuPO 2020 | SS 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung |
| Naval Architecture and Ocean Engineering StuPo 2017 | SS 2025 | 2. Profilmodule › 2.3 Strukturanalyse |
| Patent Engineering StuPO 2015 | SS 2025 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik |
| Transport Systems StuPO 2018 | SS 2025 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen |
| Vehicle Engineering StuPO 2017 | SS 2025 | 1. Kernmodule |
This module is particularly aimed at students from the MSc. Mechanical Engineering (core module Design and Development), MSc. Biomedical Engineering (compulsory elective engineering specializations) and to students interested in design from the fields of transportation (aerospace engineering, automotive engineering, ship and marine engineering) and physical engineering.
Miscellaneous
Not specified