Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Resource-saving Design against Stress and VibrationModule description #50170 / Version 7

← Module page Deutsche Fassung
Module / Version#50170 / #7
ValiditySince Winter semester 2025/26
Available language(s)English, German
Credit points6
Person responsible for the moduleLiebich, Robert
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Maschinenkonstruktion und Systemtechnik (IMS)
Academic chair35351200 FG Konstruktion und Produktzuverlässigkeit

Contact

OfficeH 66
Contact personLiebich, Robert
E-mail addressrobert.liebich@tu-berlin.de
Websitehttps://www.tu.berlin/kup/studium-lehre/master/beanspruchungsgerechtes-und-ressourcenschonendes-konstruieren

Learning outcomes

Students learn that stress-appropriate and resource-saving design is not only possible through the use of composite materials, but in particular through a correspondingly skilful design of machines, their components and structures, even when retaining classic and low-cost materials. Our graduates are able to calculate statically and dynamically highly stressed constructions according to the state of the art and to evaluate them with regard to a resource-saving and thus sustainable design and to derive design recommendations for all phases of the design process.

Knowledge of:
- Typical load and stress types in components of mechanical, automotive, marine and aerospace engineering, rail vehicle and power generation technology and steel construction
- Behaviour of machines and structures under static and dynamic loads including eigen
- Modal behaviour of machines and structures
- Damping mechanisms and models
- Stiffness properties and design of stiffness for components and structures
- Vibration-reducing measures
- Principles of resource-saving design
- Principles of lightweight metal construction
- Properties of thin-walled profiles
- Methods for calculating static and dynamic loads and stresses on structures

Skills:
- Dimensioning and design of components and structures in line with stress and resource requirements
- Vibration calculation and analysis of components and structures
- Optimisation of components and structures with regard to resource-saving dynamic behaviour
- Application of analytical and numerical (FEM) calculation methods for draft- and detail design
- Design of highly stressed components
- Design of components composed of several parts

Expertise:
- Ability to assess components with regard to loads, stresses and resource consumption
- Ability to formulate engineering design recommendations for all phases of the design process
- Confident and fast handling of the calculation methods learned

Content

- Calculations and evaluations in the construction process, design, stress determination and optimisation with regard to stresses and material resources
- Stress-appropriate design of statically and dynamically highly stressed components
- Notch design
- Lightweight construction, resource-saving design
- Properties and calculation of thin-walled lightweight structures
- Stiffness properties and design of components and structures
- Dynamic stresses from mechanical vibrations: Introduction, recommendations and analysis techniques
- Passive and active vibration-reducing measures
- Damping mechanisms and models
- Calculation methods for the design (analytical methods)
- Numerical calculation methods for detail design (FEM)

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Beanspruchungsgerechtes und ressourcenschonendes KonstruierenLecture0535 L 562 Summer semester[de]2 ISIS
Beanspruchungsgerechtes und ressourcenschonendes KonstruierenExercise0535 L 564 Summer semester[de]2 ISIS

Workload and credit points

Beanspruchungsgerechtes und ressourcenschonendes Konstruieren (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Preparation and follow-up154 h60 h
90 h

Beanspruchungsgerechtes und ressourcenschonendes Konstruieren (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Preparation and follow-up154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The material presented in the lecture is applied and consolidated in the exercise in the context of analytical and numerical (FEM) example tasks. In homework assignments, students will apply the knowledge they have learned and practice calculation and evaluation.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Engineering Design 1 & 2, Statics and Elementary Strength of Materials , Kinematics and Dynamics

Mandatory prerequisites for module examination registration:
Performance record of “Resource-saving Design against Stress and Vibration” or “Design against Stress and Vibration”.

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extent30 minutes

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

The maximum capacity of participants is 100.

Registration procedures

ISIS and MOSES

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – www.kup.tu-berlin.de

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik
SS 20261. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik
WS 2026/271. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik
Biomedical Engineering
StuPO 2018
WS 2025/262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
SS 20262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
WS 2026/272. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
WS 2025/264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
WS 2026/274. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
Engineering Science
StuPO 09.01.2012
WS 2025/2604. Grundlagen Wahlpflicht › Wahlpflichtmodule
SS 202604. Grundlagen Wahlpflicht › Wahlpflichtmodule
Engineering Science
StuPO 2007 (19.12.2007)
WS 2025/262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
SS 20262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Engineering Science
StuPO 2020
WS 2025/262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
SS 20262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
WS 2026/272.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Engineering Science
StuPO 2020
WS 2025/26Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen
SS 2026Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen
WS 2026/27Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Bauingenieurwesen/Civil Engineering (BI) › Bauingenieurwesen/Civil Engineering (Wahlpflicht/Compulsory-Elective) › Construction & Real Estate Management
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Mechanical Engineering › Mechanical Engineering (Compulsory Electives) › Sustainable Manufacturing
Mechanical Engineering
StuPO 2017
WS 2025/26Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung
SS 2026Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung
WS 2026/27Wahlpflichtmodule › Kernmodule › Konstruktion und Entwicklung
Naval Architecture and Ocean Engineering
StuPo 2017
WS 2025/262. Profilmodule › 2.3 Strukturanalyse
SS 20262. Profilmodule › 2.3 Strukturanalyse
WS 2026/272. Profilmodule › 2.3 Strukturanalyse
Patent Engineering
StuPO 2015
WS 2025/262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung
SS 20262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung
WS 2026/272.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
WS 2025/26Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik
SS 2026Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
WS 2026/27Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik
Transport Systems
StuPO 2018
WS 2025/26A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
SS 2026A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
WS 2026/27A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
Vehicle Engineering
StuPO 2017
WS 2025/261. Kernmodule
SS 20261. Kernmodule
WS 2026/271. Kernmodule
This module is particularly aimed at students from the MSc. Mechanical Engineering (core module Design and Development), MSc. Biomedical Engineering (compulsory elective engineering specializations) and to students interested in design from the fields of transportation (aerospace engineering, automotive engineering, ship and marine engineering) and physical engineering.

Miscellaneous

Not specified