Rail Vehicle Dynamics - ApplicationsModule description #50210 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50210 / #6 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Bender, Beate |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Land- und Seeverkehr |
| Academic chair | 35331800 FG Schienenfahrzeuge |
Contact
| Office | SG 14 |
|---|---|
| Contact person | Zarabi-Grittke, Lisa Noelle |
| E-mail address | l.zarabi-grittke@tu-berlin.de |
| Website | https://www.tu.berlin/schienenfzg/studium-lehre/lehre |
Learning outcomes
Students will be able to solve theoretical problems in the field of vehicle dynamics using practical tasks. Students will be able to create a mechanical substitute model based on a practical problem in vehicle dynamics and carry out investigations on this model using multi-body simulation. Students are able to analyze and interpret simulation and measurement results and assess their significance for the real vehicle.
Content
Depending on the number of participants, students work on practical tasks in the field of rail vehicle dynamics either individually or in small groups. The focus of the module is on working on a semester task, the main component of which is the application of a commercial multi-body simulation program (MBS). This enables the intensive treatment of complex issues in rail vehicle dynamics. The topics covered include wheel-rail contact, linear and non-linear analysis and curved running behavior. The knowledge acquired in other modules about the structure and function of rail vehicles and their components, the interaction of vehicle and track and the railroad operational boundary parameters can be practically applied and linked as part of the semester task.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Dynamik von Schienenfahrzeugen - Anwendungen | Integrated course | 0533 L 719 | Winter semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Dynamik von Schienenfahrzeugen - Anwendungen (Integrated course) 1
- Dynamik von Schienenfahrzeugen - Anwendungen (Integrierte Veranstaltung) Termingruppe 1 0533 L 719
Workload and credit points
Dynamik von Schienenfahrzeugen - Anwendungen (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Bearbeitung der Semesteraufgabe | 15 | 4 h | 60 h |
| Präsenzzeit | 15 | 2 h | 30 h |
| Prüfungsvorbereitung | 15 | 2 h | 30 h |
| Verfassen des Abschlussberichts | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Die Lehrinhalte werden im Wesentlichen eigenständig nach einer Einführung in Kleingruppen erarbeitet.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatorisch: Einführung in die Schienenfahrzeugtechnik, Mechanik
b) wünschenswert: Schienenfahrzeugtechnik
b) wünschenswert: Schienenfahrzeugtechnik
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| schriftlicher Bericht | 70 | written | ca. 30 bis 40 Seiten |
| Verteidigung/Abschlusspräsentation des Projektberichts | 30 | oral | ca. 20 Minuten |
Exam description
Portfolio examination with the following composition:
The completion of the semester assignment must be documented in a written report (70%). After submission of the report, an oral defense of the semester assignment will take place (30%).
The completion of the semester assignment must be documented in a written report (70%). After submission of the report, an oral defense of the semester assignment will take place (30%).
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
No later than 6 weeks after the start of the module on Moses
Recommended reading, lecture notes
Lecture notes
available
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | WS 2025/26 | Fachwissenschaftlicher Vertiefungsbereich |
| SS 2026 | Fachwissenschaftlicher Vertiefungsbereich | |
| WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich | |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | WS 2025/26 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| SS 2026 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich | |
| WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich | |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | WS 2025/26 | Fachwissenschaftlicher Vertiefungsbereich |
| SS 2026 | Fachwissenschaftlicher Vertiefungsbereich | |
| WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich | |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | WS 2025/26 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| SS 2026 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich | |
| WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich | |
| Engineering Science StuPO 2007 (19.12.2007) | WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| WS 2026/27 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Profilmodule › Produkte |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Produkte | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Produkte | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik |
| SS 2026 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik | |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik | |
| Vehicle Engineering StuPO 2017 | WS 2025/26 | 1. Kernmodule |
| SS 2026 | 1. Kernmodule | |
| WS 2026/27 | 1. Kernmodule |
Dieses Modul bildet eine Vertiefung der Schienenfahrzeugtechnik im Bereich Laufdynamik Schwingungstechnik. Insbesondere für Studierende die sich für die Fahrwerkstechnik interessieren.
Miscellaneous
Not specified