Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Strength and FatigueModule description #50276 / Version 4

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v5)
Module / Version#50276 / #4
ValiditySummer semester 2025 – Summer semester 2026
Available language(s)English, German
Credit points6
Person responsible for the moduleLiebich, Robert
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Maschinenkonstruktion und Systemtechnik (IMS)
Academic chair35351200 FG Konstruktion und Produktzuverlässigkeit

Contact

OfficeH 66
Contact personPhan, Tien Dat
E-mail addressrobert.liebich@tu-berlin.de
Websitehttps://www.tu.berlin/kup/studium-lehre/master/festigkeit-und-lebensdauer

Learning outcomes

Knowledge:
Students will learn basic engineering statistics and how to differentiate between load types. They will be able to compile load collectives and consider special loads. Students will be able to differentiate between types of stress and failure and determine the associated failure hypotheses to be applied. In addition, students will learn the theories of fatigue, endurance and durability as well as crack initiation and propagation within linear elastic fracture mechanics. They also gain knowledge of thermal fatigue and creep of components. Students will learn the full range of static and dynamic strength analysis of metallic components. Mastering these strength analyses fulfills various sustainability requirements in the product development process due to the associated reduction in resource consumption and vibrations, and an extended service life.
Skills:
Upon completion of this module, students will be able to calculate stresses from loads, apply engineering statistics to component/calculated safety, analyze the static and dynamic stresses that occur, and apply suitable failure hypotheses. In addition, they will be able to carry out complete fatigue strength verifications and calculate crack propagation within linear-elastic fracture mechanics.
Expertise:
After successfully completing the module, students will have the necessary skills to independently carry out strength and service life assessments of statically and dynamically highly stressed structures. They will be able to evaluate the various influences on material and component behavior with regard to strength and service life. They will be able to make statements about the strength properties of any metallic component and generate design recommendations with regard to stress reduction or strength increase within a product development process.

Content

Optimum static and durable design of components with a focus on mechanical engineering and drive systems, including
- loads, load-time functions, load collectives, special loads
- determination of component stresses from loads
- suitable material-mechanics models alternative: suitable models for mechanics of materials
- the computational determination of multi-axial stresses using FEM (linear-elastic material behavior and modified Neuber-Hyperbola or elastic-plastic material behavior)
- residual and thermal stresses
- the associated static design concepts
- the associated fatigue, endurance and durability concepts for service life prediction
- reliability and safety
- the comparison of computational and experimental results for model improvement
- a fracture mechanics concept for the fatigue, endurance and durability of sharply notched and cracked components (crack propagation calculations) for the quality assurance and service phase
- determination of the remaining service life in operation
- determination of inspection intervals
- case analysis studies of known damage
- strength hypotheses for smooth and notched components, considering multiaxiality, plasticity, stress embrittlement and support effects
- common fatigue, endurance and durability verifications of normal notched components (nominal, structural and notch base stress concepts, LCF, HCF, creep)
- linear-elastic fracture mechanics
- and norms and standards

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Festigkeit und LebensdauerLecture514 Winter semester[de]2 ISIS
Festigkeit und LebensdauerExercise515 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Festigkeit und Lebensdauer (Lecture) 1

All groups of this course in the catalog

Festigkeit und Lebensdauer (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Festigkeit und Lebensdauer (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Preparation and follow-up152 h30 h
60 h

Festigkeit und Lebensdauer (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
Preparation and follow-up156 h90 h
120 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The material presented in the lecture is applied and deepened in the exercise in the context of example tasks. Students will apply the knowledge they have learned in homework exercises and practice calculation and evaluation.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) obligatory: B.Sc. Mechanical Engineering, Transport Systems, Engineering Science
b) desirable: Energy Methods module, Data Analysis/Applied Statistics module, Statics and elementary Strength of Materials module
Mandatory prerequisites for module examination registration:
Performance record of “Strength and Fatigue”.

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extent30 minutes

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 50.

Registration procedures

ISIS and MOSES

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – www.kup.tu-berlin.de

Recommended literature

  • FKM-Richtlinie: Bruchmechanischer Festigkeitsnachweis. Frankfurt: VDMA-Verlag 2001
  • Hahn: Festigkeitsberechnung und Lebensdauerabschätzung für metallische Bauteile unter mehrachsig schwingender Beanspruchung. Berlin: Wissenschaft-und-Technik-Verlag 1995, zugleich Diss. TU Berlin 1995
  • Haibach Betriebsfestigkeit - Verfahren und Daten zur Bauteilberechnung. Berlin: Springer 2002
  • Issler, Ruoß, Häfele: Festigkeitslehre - Grundlagen. Berlin: Springer 2003
  • Wellinger, Dietmann: Festigkeitsberechnung. Stuttgart: Kröner 1976

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20251. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik
SS 20261. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik
Biomedical Engineering
StuPO 2018
SS 20252. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
WS 2025/262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
SS 20262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
WS 2025/264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.4 Festkörpermechanik › 2.4b Ergänzungsbereich
WS 2025/262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
SS 20262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.4 Festkörpermechanik › 2.4b Ergänzungsbereich
WS 2025/262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
SS 20262.4 Festkörpermechanik › 2.4b Ergänzungsbereich
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Kernmodule › Berechnung
WS 2025/26Wahlpflichtmodule › Kernmodule › Berechnung
SS 2026Wahlpflichtmodule › Kernmodule › Berechnung
Patent Engineering
StuPO 2015
SS 20252.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
WS 2025/262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
SS 20262.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
WS 2025/26Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
SS 2026Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
This module is particularly aimed at students from the MSc. Mechanical Engineering (core module Calculation) MSc. Biomedical Engineering (compulsory elective engineering specializations) and to Master's students interested in design from the fields of transportation (MSc Aerospace Engineering, Automotive Engineering) and Physical Engineering who see their professional field in the development and research of highly stressed components as well as drive and machine systems.

Miscellaneous

Not specified