Mechanisms DesignModule description #50315 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50315 / #7 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Wiest, Daniel |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351300 FG Konstruktion von Maschinensystemen |
Contact
| Office | W 1 |
|---|---|
| Contact person | Wiest, Daniel |
| E-mail address | daniel.wiest@tu-berlin.de |
| Website | http://www.km.tu-berlin.de |
Learning outcomes
After successfully completing the module, students will have:
Knowledge
- in gear analysis and synthesis
- in gearbox systematics
- in the application of non-uniform transmission gears
- in numerical and semi-graphical gear analysis methods
Skills:
- for the analysis of transmissions
- for the semi-graphical analysis of kinematic chains, mechanisms and gearboxes
- for the methodical development of gearboxes for specific tasks
Competencies:
- to select, evaluate and design gearboxes for any motion task
- to assess the efficiency of individual components and their interaction in the overall system
- to transfer the design methodology to complex systems and other technical products
Knowledge
- in gear analysis and synthesis
- in gearbox systematics
- in the application of non-uniform transmission gears
- in numerical and semi-graphical gear analysis methods
Skills:
- for the analysis of transmissions
- for the semi-graphical analysis of kinematic chains, mechanisms and gearboxes
- for the methodical development of gearboxes for specific tasks
Competencies:
- to select, evaluate and design gearboxes for any motion task
- to assess the efficiency of individual components and their interaction in the overall system
- to transfer the design methodology to complex systems and other technical products
Content
1. transmission systems and introduction to uniform and non-uniform transmissions
2. degrees of freedom of kinematic chains
3. poles, pole tracks and their applications
4. semigraphic methods and computer methods for determining speed and acceleration
5. pole change speed
6. numerical gear analysis
7. forces in gears
8. gear synthesis
2. degrees of freedom of kinematic chains
3. poles, pole tracks and their applications
4. semigraphic methods and computer methods for determining speed and acceleration
5. pole change speed
6. numerical gear analysis
7. forces in gears
8. gear synthesis
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Getriebetechnik | Integrated course | 3535 L 211 | Winter semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Getriebetechnik (Integrated course) 1
- Getriebetechnik (Integrierte Veranstaltung) Termingruppe 1 3535 L 211
Workload and credit points
Getriebetechnik (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 90 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Homework | 1 | 45 h | 45 h |
| Preparation for the written test | 1 | 45 h | 45 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The integrated course includes:
1. lectures in a large group to convey the course content and contexts
2. exercises to deepen and apply the lecture material
1. lectures in a large group to convey the course content and contexts
2. exercises to deepen and apply the lecture material
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 30 | written | 30 hours |
| Test | 70 | written | 60 minutes |
Exam description
100 portfolio points can be achieved in this module.
The acquired portfolio points are converted into grades according to the following grading scale:
more than or equal to 95 portfolio points, grade 1.0
more than or equal to 90 portfolio points, grade 1.3
more than or equal to 85 portfolio points, grade 1.7
more than or equal to 80 portfolio points, grade 2.0
more than or equal to 75 portfolio points, grade 2.3
more than or equal to 70 portfolio points, grade 2.7
more than or equal to 65 portfolio points, grade 3.0
more than or equal to 60 portfolio points, grade 3.3
more than or equal to 55 portfolio points, grade 3.7
more than or equal to 50 portfolio points, grade 4.0
less than 50 portfolio points, grade 5.0
The acquired portfolio points are converted into grades according to the following grading scale:
more than or equal to 95 portfolio points, grade 1.0
more than or equal to 90 portfolio points, grade 1.3
more than or equal to 85 portfolio points, grade 1.7
more than or equal to 80 portfolio points, grade 2.0
more than or equal to 75 portfolio points, grade 2.3
more than or equal to 70 portfolio points, grade 2.7
more than or equal to 65 portfolio points, grade 3.0
more than or equal to 60 portfolio points, grade 3.3
more than or equal to 55 portfolio points, grade 3.7
more than or equal to 50 portfolio points, grade 4.0
less than 50 portfolio points, grade 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration according to the respective examination regulations.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – PDF Dateien der ppt-Präsentationen von Vorlesung und Übung werden auf ISIS zur Verfügung gestellt.
Recommended literature
- Hagedorn, L., Thonfeld, L. u. Rankers, A.: Konstruktive Getriebelehre. Berlin: Springer 2009
- Kerle, H., Corves, B. u. Hüsing, M.: Getriebetechnik. Grundlagen, Entwicklung und Anwendung Ungleichmäßig übersetzender Getriebe. Wiesbaden: Vieweg & Teubner 2011
- Lohse, P.: Getriebesynthese. Bewegungsabläufe ebener Koppelmechanismen. Berlin: Springer 1986
- Volmer, J. (Hrsg.): Getriebetechnik. Lehrbuch. Berlin: Verl. Technik 1987
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Automotive Systems Automotive Systems (M. Sc.) - StuPO 2017 | WS 2026/27 | Wahlpflichtbereich |
| Biomedical Engineering StuPO 2018 | WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung |
| Engineering Science StuPO 2020 | WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Kernmodule › Berechnung |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.2. Berechnung |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2026/27 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | WS 2026/27 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik |
| Vehicle Engineering StuPO 2017 | WS 2026/27 | 1. Kernmodule |
Can be used in all technical degree programs that require a solid and confident knowledge of the above-mentioned goals, such as Mechanical Engineering, Computational Engineering Science, Engineering Scince and Transport Systems.
Miscellaneous
Not specified