Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Principles of Quality ManagementModule description #50346 / Version 7

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v9)
Module / Version#50346 / #7
ValidityWinter semester 2025/26 – Summer semester 2026
Available language(s)English, German
Credit points6
Person responsible for the moduleJochem, Roland
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionNot specified

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361300 FG Qualitätswissenschaft

Contact

OfficePTZ 3
Contact personMüller-Stein, Lennart Frederik
E-mail addressl.mueller-stein@tu-berlin.de
Websitehttps://www.tu.berlin/qw/studium-lehre/lehrveranstaltungen/gdqm-grundlagen-des-qualitaetsmanagements

Learning outcomes

Upon successful completion of the module, students possess fundamental knowledge of quality management and are able to independently apply it in problem-solving processes. The acquired knowledge of quality management tools and methods is utilized by the students to pursue systematic and holistic approaches. Furthermore, students are capable of preparing project results and presenting and defending them under practical conditions.

Content

Lec 01 - Einführung
Lec 02 - Historie, Qualitätspreise
Lec 03 - Q7, M7
Lec 04 - K7, D7
Lec 05 - RE, RM
Lec 06 - Wareneingangs und -ausgangsprüfung
Lec 07 - MSA, MFU, PFU, SPC
Lec 08 - Lean Management
Lec 09 - Six Sigma
Lec 10 - Standards im QM
Lec 11 - Audits
Lec 12 - Digitales QM
Lec 13 - Gastvortrag
Ex 01 - Q7, M7, K7, D7
Ex 02 - RE, RM

Module components

Mandatory component

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Grundlagen des QualitätsmanagementsLecture0536 L 310 Winter semester[de]2 ISIS
Grundlagen des QualitätsmanagementsExercise0536 L 312 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Grundlagen des Qualitätsmanagements (Lecture) 1

All groups of this course in the catalog

Grundlagen des Qualitätsmanagements (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Grundlagen des Qualitätsmanagements (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre-/post-processing154 h60 h
90 h

Grundlagen des Qualitätsmanagements (Exercise)

Workload descriptionMultiplierHoursTotal
Completion of the exercises315 h45 h
Attendance52 h10 h
Pre-/post-processing310 h30 h
85 h

The workload of the module adds up to 175 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The module is divided into a weekly lecture and two tutorials.

Admission restriction: none
ECTS credits: 6

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Conversational-level proficiency in German is recommended for the exercises (group work).

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
ISIS quizzes10written10 quizzes
Presentation30oral30 minutes
Written test60written60 minutes

Exam description

The examination format for this module is a portfolio assessment. For this, the following components with corresponding weightings must be completed:

ISIS quizzes (throughout the semester) - 10 out of 100 points
Group presentation (30 minutes) - 30 out of 100 points
Written test (60 minutes) - 60 out of 100 points
Grading scale 2 is applied:

95 or more -> 1.0
90 or more -> 1.3
85 or more -> 1.7
80 or more -> 2.0
75 or more -> 2.3
70 or more -> 2.7
65 or more -> 3.0
60 or more -> 3.3
55 or more -> 3.7
50 or more -> 4.0
Less than 50 -> 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration for the entire module takes place via QISPOS.

If registration via QISPOS is not possible (reasons include diploma programs, free elective modules, or additional modules), timely registration must be completed through the examination office.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • Jochem, R; Mertins, K.; Knothe, T. (Hrsg.): Prozessmanagement - Strategien, Methoden, Umsetzung, Symposium Publishing, Düsseldorf, ISBN 978-3-939707-56-1
  • Jochem, R.: Was kostet Qualität? - Wirtschaftlichkeit von Qualität ermitteln, Hanser Verlag, München, 2010, ISBN 978-3-446-42182-0
  • Kamiske, G. F.; Brauer, J.-P.: Qualitätsmanagement von A bis Z - Erläuterungen moderner Begriffe des Qualitätsmanagements, 4. aktual. und erg. Auflage, Hanser Verlag, München, 2003, ISBN 3-446-22458-0
  • Schmitt, R.; Pfeiffer, T.: Masing Handbuch Qualitätsmanagement, 5., vollst. neu bearb. Aufl., Hanser Verlag, München, 2007, ISBN 978-3-446-40752-7
  • Zollondz, Hans-Dieter: Grundlagen Qualitätsmanagement, 2. Aufl., R. Oldenbourg Verlag, München 2006, ISBN 3-486-57964-9

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden
SS 20261. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden
Brewing and Beverage Technology
StuPO 2022
WS 2025/26Wahlpflichtmodule › Fachübergreifende Wahlpflicht
SS 2026Wahlpflichtmodule › Fachübergreifende Wahlpflicht
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
WS 2025/266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik
SS 20266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
WS 2025/26Integrationsbereich › Integrationsbereich (Wahlpflicht)
SS 2026Integrationsbereich › Integrationsbereich (Wahlpflicht)
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
WS 2025/26Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management
SS 2026Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Quality Management
Mechanical Engineering
StuPO 2017
WS 2025/26Wahlpflichtmodule › Profilmodule › Produktion
SS 2026Wahlpflichtmodule › Profilmodule › Produktion
Mechanical Engineering
StuPO 2017
WS 2025/26Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Produktion und Organisation
SS 2026Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Produktion und Organisation
Metals Engineering (teacher training)
Metals Engineering (teacher training) (M. Ed.) - StuPO 2015
WS 2025/26Fachwissenschaftlicher Vertiefungsbereich
SS 2026Fachwissenschaftlicher Vertiefungsbereich
Naval Architecture and Ocean Engineering
StuPo 2017
WS 2025/262. Profilmodule › 2.1 Systementwurf
SS 20262. Profilmodule › 2.1 Systementwurf
Patent Engineering
StuPO 2015
WS 2025/262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
SS 20262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.4. Produktion
Production Engineering
StuPO 2018 (09.05.2018)
WS 2025/264. Profilmodule › 4.2 Automatisierungs- und Informationstechnik
SS 20264. Profilmodule › 4.3 Produktionsmanagement
Sustainable Management
StuPO 2022
WS 2025/26Compulsory Elective Area › Profile Studies › Focus: Economy and Technology
SS 2026Compulsory Elective Area › Profile Studies › Focus: Economy and Technology
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
WS 2025/26Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik
SS 2026Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik
Transport Systems
StuPO 2018
WS 2025/26A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
SS 2026A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen
Vehicle Engineering
StuPO 2017
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified