Basis of design, construction and operation of roadsModule description #50349 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50349 / #8 |
|---|---|
| Validity | Since Summer semester 2024 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Richter, Thomas |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Not specified |
| Academic chair | Not specified |
Contact
| Office | TIB 3/3-3 |
|---|---|
| Contact person | Richter, Thomas |
| E-mail address | lehre@spb.tu-berlin.de |
| Website | https://www.tu.berlin/strassenplanung/ |
Learning outcomes
As part of the course, students acquire basic knowledge of the design and operation of road traffic systems, which are discussed separately below. The module is divided into a design part and an operation part, which are taught in parallel for organisational reasons (module overlap).
Learning outcomes Design:
Students understand the main trends in the development of mobility and road traffic in Germany (urbanization, demographics, accident figures, etc.). They will understand how transport planning has shaped cities since the Second World War and how planning principles have changed over time.
Students are familiar with the following technical regulations for road design (in their currently valid versions), understand their areas of application and purposes as well as their structure:
- Cycling Plan of the State of Berlin (RVP)
- German Guidelines for noise protection on roads (RLS)
- German Guidelines for the design of rural roads (RAL)
- German Guidelines for the design of urban roads (RASt)
- German Guidelines for the standardization of the superstructure (RStO)
- German Recommendations for cycling facilities (ERA)
- German Recommendations for pedestrian traffic facilities (EFA)
Students will also be able to apply the above-mentioned technical regulations independently and in a targeted manner in specific contexts. This applies in particular to:
- The correct selection and application of rural road design classes
- The correct application of the relation alignment
- The compilation of urban road cross-sections in line with usage requirements with the aid of urban planning dimensioning
- The correct derivation of a load class for the road superstructure- The correct derivation of a frost protection dimensioning for the road superstructure
They will understand the necessary (often safety-relevant) principles that led to the specifications of the technical regulations.
In addition to design application skills, students also understand the concept of "guided design" according to RASt as well as its advantages and disadvantages. Students also understand the differences between the basic forms of junctions and their basic design elements. Students also understand the stages of the planning process, how it differs inside and outside built-up areas and the respective contents.
In the subject area "Driving Dynamics", students understand the concept of the control loop when driving a vehicle and the basic principles of driving dynamics in road design. They are also able to carry out typical vehicle dynamics calculations (e.g. stopping distances, necessary lateral inclinations and forces that occur) independently. To this end, they also understand the concept of the coefficient of adhesion.
Students will understand how the aforementioned aspects of driving dynamics are reflected in road design and specifically in the construction and dimensioning of roads. In addition, they understand typical construction methods as well as different conditions of use and composition of layers and construction materials in Germany.
Finally, students will understand the problems of immission control for air and noise pollution and the effectiveness of typical noise protection measures.
Learning outcomes Operation:
The operations part of the module supplements the design part, which is primarily dedicated to infrastructure, with the upstream and downstream planning, dimensioning and evaluation steps. After completing the module, students will understand the requirements and limitations of coping with growing traffic flows without having to constantly expand infrastructure.
To this end, students first understand how the development of mobility and road traffic in Germany places increasing demands on the infrastructure and how infrastructure expansion can be prevented with regard to the operational principles despite capacity expansion.
To this end, students understand the purpose, function, areas of application and limits of traffic management and how it differs from mobility management.Students also understand the basic methodology of German road network planning and how this defines the needs and requirements for the infrastructure (of the design part) and how the fulfilment of the requirements can be evaluated.
In order to achieve this goal, students are familiar with the following technical regulations for road operation (in their currently valid versions), understand their areas of application and purposes as well as their structure:
- Guidelines for integrated network design (RIN)
- Manual for the Design of Road Traffic Facilities (HBS)
Students will also be able to apply the above-mentioned technical regulations independently and in a targeted manner in specific contexts. This applies in particular to:
- The correct determination of traffic route categories
- The correct extrapolation of traffic count data to usable annual data
- The correct determination of quality levels of traffic flow on motorways and rural roads
- The correct determination of service levels of service quality on network sections of motorways and rural roads
They will understand the necessary principles that led to the specifications of the technical regulations and how they interact with the regulations of road design.
After completing the operations part, students will be able to independently identify the parameters required for the above-mentioned areas of application (which are given in the design part), select target-oriented methods for generating corresponding raw data and extrapolate collected raw data to usable parameters (using the example of an urban road).
Students understand the relevance of these parameters in road operation and their interactions based on the fundamental diagram of the traffic flow. They also understand where these parameters come from and which basic assumptions they are based on (e.g. vehicle arrival and waiting models).
Learning outcomes Design:
Students understand the main trends in the development of mobility and road traffic in Germany (urbanization, demographics, accident figures, etc.). They will understand how transport planning has shaped cities since the Second World War and how planning principles have changed over time.
Students are familiar with the following technical regulations for road design (in their currently valid versions), understand their areas of application and purposes as well as their structure:
- Cycling Plan of the State of Berlin (RVP)
- German Guidelines for noise protection on roads (RLS)
- German Guidelines for the design of rural roads (RAL)
- German Guidelines for the design of urban roads (RASt)
- German Guidelines for the standardization of the superstructure (RStO)
- German Recommendations for cycling facilities (ERA)
- German Recommendations for pedestrian traffic facilities (EFA)
Students will also be able to apply the above-mentioned technical regulations independently and in a targeted manner in specific contexts. This applies in particular to:
- The correct selection and application of rural road design classes
- The correct application of the relation alignment
- The compilation of urban road cross-sections in line with usage requirements with the aid of urban planning dimensioning
- The correct derivation of a load class for the road superstructure- The correct derivation of a frost protection dimensioning for the road superstructure
They will understand the necessary (often safety-relevant) principles that led to the specifications of the technical regulations.
In addition to design application skills, students also understand the concept of "guided design" according to RASt as well as its advantages and disadvantages. Students also understand the differences between the basic forms of junctions and their basic design elements. Students also understand the stages of the planning process, how it differs inside and outside built-up areas and the respective contents.
In the subject area "Driving Dynamics", students understand the concept of the control loop when driving a vehicle and the basic principles of driving dynamics in road design. They are also able to carry out typical vehicle dynamics calculations (e.g. stopping distances, necessary lateral inclinations and forces that occur) independently. To this end, they also understand the concept of the coefficient of adhesion.
Students will understand how the aforementioned aspects of driving dynamics are reflected in road design and specifically in the construction and dimensioning of roads. In addition, they understand typical construction methods as well as different conditions of use and composition of layers and construction materials in Germany.
Finally, students will understand the problems of immission control for air and noise pollution and the effectiveness of typical noise protection measures.
Learning outcomes Operation:
The operations part of the module supplements the design part, which is primarily dedicated to infrastructure, with the upstream and downstream planning, dimensioning and evaluation steps. After completing the module, students will understand the requirements and limitations of coping with growing traffic flows without having to constantly expand infrastructure.
To this end, students first understand how the development of mobility and road traffic in Germany places increasing demands on the infrastructure and how infrastructure expansion can be prevented with regard to the operational principles despite capacity expansion.
To this end, students understand the purpose, function, areas of application and limits of traffic management and how it differs from mobility management.Students also understand the basic methodology of German road network planning and how this defines the needs and requirements for the infrastructure (of the design part) and how the fulfilment of the requirements can be evaluated.
In order to achieve this goal, students are familiar with the following technical regulations for road operation (in their currently valid versions), understand their areas of application and purposes as well as their structure:
- Guidelines for integrated network design (RIN)
- Manual for the Design of Road Traffic Facilities (HBS)
Students will also be able to apply the above-mentioned technical regulations independently and in a targeted manner in specific contexts. This applies in particular to:
- The correct determination of traffic route categories
- The correct extrapolation of traffic count data to usable annual data
- The correct determination of quality levels of traffic flow on motorways and rural roads
- The correct determination of service levels of service quality on network sections of motorways and rural roads
They will understand the necessary principles that led to the specifications of the technical regulations and how they interact with the regulations of road design.
After completing the operations part, students will be able to independently identify the parameters required for the above-mentioned areas of application (which are given in the design part), select target-oriented methods for generating corresponding raw data and extrapolate collected raw data to usable parameters (using the example of an urban road).
Students understand the relevance of these parameters in road operation and their interactions based on the fundamental diagram of the traffic flow. They also understand where these parameters come from and which basic assumptions they are based on (e.g. vehicle arrival and waiting models).
Content
As part of the course, students acquire basic knowledge of the design and operation of road traffic systems, which are considered separately below. The module is divided into a design part and an operation part, which are taught in parallel for organisational reasons (module overlap).
Design content:
- Historical development of road design
- Current trends in road design
- Road safety in the road sector
- Types of urban areas
- Typical objectives, target areas and conflicting objectives in urban and extra-urban design
- Objectives, strategies, measures, evaluation procedures
- Road functions of and utilisation requirements for road spaces inside and outside built-up areas
- Methodology of road design inside and outside built-up areas
- Planning process and design principles inside and outside built-up areas
- "The self-explanatory road"
- Design classes of motorways and rural roads
- Intersections
- Driving dynamics
- Structure, construction materials, superstructure dimensioning and construction methods of a road
- Immission control with regard to air and noise pollution
Contents Operation:
- Current trends in road transport
- Traffic management and mobility management
- Connected driving
- Road network planning and traffic route categories according to the RIN
- Traffic surveys
- Traffic planning process and evaluation procedures
- Models and parameters of traffic flow and waiting processes
- The fundamental diagram
- Extrapolation of characteristic values for the processing of issues
- Quality assessment of the traffic flow according to the HBS
- Interaction of HBS and RIN
Design content:
- Historical development of road design
- Current trends in road design
- Road safety in the road sector
- Types of urban areas
- Typical objectives, target areas and conflicting objectives in urban and extra-urban design
- Objectives, strategies, measures, evaluation procedures
- Road functions of and utilisation requirements for road spaces inside and outside built-up areas
- Methodology of road design inside and outside built-up areas
- Planning process and design principles inside and outside built-up areas
- "The self-explanatory road"
- Design classes of motorways and rural roads
- Intersections
- Driving dynamics
- Structure, construction materials, superstructure dimensioning and construction methods of a road
- Immission control with regard to air and noise pollution
Contents Operation:
- Current trends in road transport
- Traffic management and mobility management
- Connected driving
- Road network planning and traffic route categories according to the RIN
- Traffic surveys
- Traffic planning process and evaluation procedures
- Models and parameters of traffic flow and waiting processes
- The fundamental diagram
- Extrapolation of characteristic values for the processing of issues
- Quality assessment of the traffic flow according to the HBS
- Interaction of HBS and RIN
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Grundlagen des Straßenwesens | Integrated course | 0533 L 306 | Winter semester | – | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Grundlagen des Straßenwesens (Integrated course) 1
- Grundlagen des Straßenwesens (Integrierte Veranstaltung) Termingruppe 1 0533 L 306
Workload and credit points
Grundlagen des Straßenwesens (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Homework | 15 | 8 h | 120 h |
| Attendance | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The course is an integrated course. In the lecture track, students acquire the necessary theoretical knowledge, which is taken up in the exercises and applied in practice. Supplementary weekly learning reflection in small groups is intended to help students understand and anchor the content.
The process of planning a road (design) and the process of operational conception and evaluation (operation) are taught using specific examples, which are worked on together during the semester and form a common thread throughout the semester.
The process of planning a road (design) and the process of operational conception and evaluation (operation) are taught using specific examples, which are worked on together during the semester and form a common thread throughout the semester.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
The module can only be taken if the module "Basics of Road Planning" has not already been attended or completed!
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 70 | practical | semesterbegleitend |
| Reflection on learning | 30 | written | semesterbegleitend |
Exam description
The examination consists of a peer-reviewed weekly learning reflection and two take-home exams ("quests") mid-semester and at the end of the semester.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Due to the organisational effort of the project and the time schedule, internal registration via ISIS within the first week is mandatory (also independent of the exam registration with the PA!).
Further information on the course can be found at: tu.berlin/strassenplanung
Questions may be sent by e-mail to: sekretariat@spb.tu-berlin.de
Further information on the course can be found at: tu.berlin/strassenplanung
Questions may be sent by e-mail to: sekretariat@spb.tu-berlin.de
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- FGSV (2006): "Richtlinien für die Anlage von Stadtstraßen (RASt)", Ausgabe 2006.
- FGSV (2008a): "Richtlinien für die Anlage von Autobahnen (RAA)", Ausgabe 2008.
- FGSV (2008b): "Richtlinien für die integrierte Netzgestaltung (RIN)", Ausgabe 2008.
- FGSV (2012a): "Richtlinien für die Anlage von Landstraßen (RAL)", Ausgabe 2012.
- FGSV (2012b): "Richtlinien für die Standardisierung des Oberbaus (RStO)", Ausgabe 2012.
- FGSV (2015): "Handbuch für die Bemessung von Straßenverkehrsanlagen (HBS)", Ausgabe 2015.
- Richter, T. (2023): "Planung von Autobahnen und Landstraßen", 2. Auflage.
- Vallée, D.; Engel, B.; Vogt, W.. (2021): "Stadtverkehrsplanung Band 1: Grundlagen, Ziele und Perspektiven", 3. Auflage.
- Vallée, D.; Engel, B.; Vogt, W.. (2021): "Stadtverkehrsplanung Band 2: Analyse, Prognose und Bewertung", 3. Auflage.
- Vallée, D.; Engel, B.; Vogt, W.. (2021): "Stadtverkehrsplanung Band 3: Entwurf, Bemessung und Betrieb", 3. Auflage.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Civil Engineering Civil Engineering (B. Sc.) - StuPO 2025 | WS 2026/27 | Wahlpflichtbereich › Profillinie Gebaute Umwelt und Infrastruktur |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | WS 2024/25 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) |
| SS 2025 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| Sociology and Technology Studies StuPO 2014 (7. Mai 2014) | SS 2025 | Technisches Fach › Verkehrswesen und -planung › Vertiefungsbereich 1: Landverkehr |
| WS 2025/26 | Technisches Fach › Verkehrswesen und -planung › Vertiefungsbereich 1: Landverkehr | |
| SS 2026 | Technisches Fach › Verkehrswesen und -planung › Vertiefungsbereich 1: Landverkehr | |
| WS 2026/27 | Technisches Fach › Verkehrswesen und -planung › Vertiefungsbereich 1: Landverkehr | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik |
| WS 2025/26 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik | |
| SS 2026 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik | |
| WS 2026/27 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik | |
| Transport Systems StuPO 2018 | SS 2025 | B. Studienrichtungen › Planung und Betrieb › 3. Grundlagen der Studienrichtung |
| WS 2025/26 | B. Studienrichtungen › Planung und Betrieb › 3. Grundlagen der Studienrichtung | |
| SS 2026 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich | |
| WS 2026/27 | B. Studienrichtungen › Planung und Betrieb › 3. Grundlagen der Studienrichtung |
Miscellaneous
The module provides the basis for the more advanced modules in the specialization and application area focusing on road planning and road operation. The course is taught together with "Basics of Road Planning" (3 LP). Please make sure that you take the correct module!
"Basis of design, construction and operation of roads" (6 LP) forms the basis for the advanced modules in the specialization and application area with the specialization Road Design and Road Operation.
"Basis of design, construction and operation of roads" (6 LP) forms the basis for the advanced modules in the specialization and application area with the specialization Road Design and Road Operation.