Lightweight Design IIModule description #50400 / Version 6
- 6 CP
- Oral exam
- Graded
- Summer semester
- German
| Module / Version | #50400 / #6 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Bardenhagen, Andreas |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Luft- und Raumfahrt |
| Academic chair | 35341100 FG Luftfahrzeugbau und Leichtbau |
Contact
| Office | F 2 |
|---|---|
| Contact person | Bardenhagen, Andreas |
| E-mail address | andreas.bardenhagen@tu-berlin.de |
| Website | http://www.tu-berlin.de/?id=58558 |
Learning outcomes
The aim is to acquire knowledge in:
• fundamental phenomena of the load-bearing behavior of structures
• modeling of thin-walled load-carrying structures using the mechanical elements membrane, plate,
and shell
• instability modes of thin-walled surface structures, such as buckling, local buckling, snapping, tilting,
and wrinkling
• structural concepts for increasing the bending stiffness of plates (orthotropic stiffening, sandwich
construction)
• analysis methods for determining stress states in lightweight structures (tension field theory, four-
boom box girder)
The aim is to develop skills in:
• calculating deformations of plates and shells while accounting for boundary conditions
• determining critical buckling stresses in skin fields under various support and loading conditions
• calculating orthotropically stiffened plates with respect to deformation and stress
• calculating deformations and stresses in sandwich panels
• weight-optimized design of sandwich panels considering stiffness, strength, and stability constraints
• determining critical loads for sandwich panels with respect to wrinkling
• applying the tension field theory
The aim is to acquire competence in:
• weight-optimized topological design of lightweight structures
• analyzing and sizing load-bearing structures using appropriate analysis methods
• generating and predicting structural behavior (e.g., deformations)
• fundamental phenomena of the load-bearing behavior of structures
• modeling of thin-walled load-carrying structures using the mechanical elements membrane, plate,
and shell
• instability modes of thin-walled surface structures, such as buckling, local buckling, snapping, tilting,
and wrinkling
• structural concepts for increasing the bending stiffness of plates (orthotropic stiffening, sandwich
construction)
• analysis methods for determining stress states in lightweight structures (tension field theory, four-
boom box girder)
The aim is to develop skills in:
• calculating deformations of plates and shells while accounting for boundary conditions
• determining critical buckling stresses in skin fields under various support and loading conditions
• calculating orthotropically stiffened plates with respect to deformation and stress
• calculating deformations and stresses in sandwich panels
• weight-optimized design of sandwich panels considering stiffness, strength, and stability constraints
• determining critical loads for sandwich panels with respect to wrinkling
• applying the tension field theory
The aim is to acquire competence in:
• weight-optimized topological design of lightweight structures
• analyzing and sizing load-bearing structures using appropriate analysis methods
• generating and predicting structural behavior (e.g., deformations)
Content
Course contents:
• Plate and shell models
• Orthotropically stiffened panels
• Theory of sandwich structures (membrane theory and extended sandwich theory)
• Comparison of structural design concepts
• Instability phenomena in thin-walled structures (critical buckling loads and appropriate stiffening
methods)
• Shear-panel girders
• Rectangular box girder
• Plate and shell models
• Orthotropically stiffened panels
• Theory of sandwich structures (membrane theory and extended sandwich theory)
• Comparison of structural design concepts
• Instability phenomena in thin-walled structures (critical buckling loads and appropriate stiffening
methods)
• Shear-panel girders
• Rectangular box girder
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Leichtbau II | Integrated course | 3534 L 215 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Leichtbau II (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Homework | 4 | 11 h | 44 h |
| Lecture Course | 15 | 4 h | 60 h |
| Preparation and follow-up work | 15 | 5 h | 75 h |
| 179 h | |||
The workload of the module adds up to 179 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lecture, exercise, demonstration and homework
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Analysis, linear algebra, differential equations
Mechanics, Materials engineering
Mechanics, Materials engineering
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | 30 minutes |
Exam description
Form of examination: -oral exam
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
The examination must be registered in accordance with the applicable examination regulations. Additional registration requirements will be announced during the course.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Linke/Nast: Festigkeitslehre für den Leichtbau. Springer 2015
- Megson: Aircraft Structures for Engineering Students. 5th ed. Elsevier 2013
- Wiedemann: Leichtbau Elemente und Konstruktion. 3. Aufl. Springer 2007
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 2. Kernmodule › 2.2 Luftfahrzeugbau und Leichtbau |
| WS 2025/26 | 2. Kernmodule › 2.2 Luftfahrzeugbau und Leichtbau | |
| SS 2026 | 2. Kernmodule › 2.2 Luftfahrzeugbau und Leichtbau | |
| WS 2026/27 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule |
| WS 2025/26 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule | |
| SS 2026 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen |
| WS 2025/26 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen | |
| SS 2026 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen | |
| WS 2026/27 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen › Maschinenbau (MB) › Maschinenbau (Wahlpflicht) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering | |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Aerospace Engineering | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Transportation Engineering › Aerospace Engineering |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| Naval Architecture and Ocean Engineering StuPo 2017 | SS 2025 | 1. Kernmodule › 1.3 Strukturanalyse |
| WS 2025/26 | 1. Kernmodule › 1.3 Strukturanalyse | |
| SS 2026 | 1. Kernmodule › 1.3 Strukturanalyse | |
| WS 2026/27 | 1. Kernmodule › 1.3 Strukturanalyse | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik |
| WS 2025/26 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Schiffs- und Meerestechnik | |
| SS 2026 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik | |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik | |
| Transport Systems StuPO 2018 | SS 2025 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich |
| WS 2025/26 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich | |
| SS 2026 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich | |
| WS 2026/27 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich |
Suitable degree programs:
• B.Sc. Transportation Engineering
• M.Sc. Aerospace Engineering
• Other engineering programs with a focus on structural mechanics
Relevant specializations:
• Aeronautical Engineering
Foundation for:
• Composite Lightweight Design I and II
• Fatigue Strength of Lightweight Structures made of Metallic and Composite Materials
• B.Sc. Transportation Engineering
• M.Sc. Aerospace Engineering
• Other engineering programs with a focus on structural mechanics
Relevant specializations:
• Aeronautical Engineering
Foundation for:
• Composite Lightweight Design I and II
• Fatigue Strength of Lightweight Structures made of Metallic and Composite Materials
Miscellaneous
Not specified