Mechanics of Fibre Composite MaterialsModule description #50427 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v6)
| Module / Version | #50427 / #5 |
|---|---|
| Validity | Summer semester 2022 – Summer semester 2022 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Köllner, Anton |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35374100 FG Mechanik insbesondere Stabilität und Versagen funktionsoptimierter Strukturen |
Contact
| Office | MS 2 |
|---|---|
| Contact person | Köllner, Anton |
| E-mail address | anton.koellner@tu-berlin.de |
| Website | https://www.tu.berlin/svfs/studium-lehre/lehrveranstaltungen/mechanik-der-faserverbundwerkstoffe/ |
Learning outcomes
The learning outcomes of the module are:
- Understanding the composition of fibre reinforced polymer composites and the mechanical behaviour of the constituents,
- Understanding the mechanical behaviour of anisotropic media, in particular multi-layered composite structures
- Analysing and evaluating the effect of stacking sequences on the mechanical behaviour of composite plates; optimize layups for certain loading scenarios
- Analysing the buckling behaviour of slender composite structures (struts, plates)
- Evaluating buckling loads and post-buckling behaviour for various plate configurations and loading conditions
- Examining and breakdown of failure mechanisms in composite structures
- Analysing and evaluating failure loads for composite structural components
- Understanding the composition of fibre reinforced polymer composites and the mechanical behaviour of the constituents,
- Understanding the mechanical behaviour of anisotropic media, in particular multi-layered composite structures
- Analysing and evaluating the effect of stacking sequences on the mechanical behaviour of composite plates; optimize layups for certain loading scenarios
- Analysing the buckling behaviour of slender composite structures (struts, plates)
- Evaluating buckling loads and post-buckling behaviour for various plate configurations and loading conditions
- Examining and breakdown of failure mechanisms in composite structures
- Analysing and evaluating failure loads for composite structural components
Content
- Introduction to fibre reinforced polymer (FRP) composites (concept, examples, materials and their characteristics, manufacturing processes)
- Review of solid mechanics (CAUCHY stress tensor, HOOKE’s law in 3D for anisotropic material behaviour)
- CLASSICAL LAMINATE THEORY (coordinate transformation, stress-strain relationship for unidirectional plies and multi-layered structures)
- Stability failure of composite structures (review elastic stability theory, buckling and post-buckling of composite struts and plates)
- Material failure in composites (failure mechanisms in composites, failure criteria for orthotropic layers, physically-based failure models)
- Review of solid mechanics (CAUCHY stress tensor, HOOKE’s law in 3D for anisotropic material behaviour)
- CLASSICAL LAMINATE THEORY (coordinate transformation, stress-strain relationship for unidirectional plies and multi-layered structures)
- Stability failure of composite structures (review elastic stability theory, buckling and post-buckling of composite struts and plates)
- Material failure in composites (failure mechanisms in composites, failure criteria for orthotropic layers, physically-based failure models)
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Mechanics of Fibre Composite Materials | Project | 0530 L 047 | Winter semester | [en] | 4 | ISIS |
Workload and credit points
Mechanics of Fibre Composite Materials (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module contains weekly lectures and four tutorials. Coursework in the form of three assignments will be prepared by groups of 3-5 students. Two assignments need to be prepared in the form of a written report and one assignment as an oral presentation.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
required: Kenntnisse in Statik und elementarer Festigkeitslehre (statics and strength of materials) oder Mechanik E, desirable: good knowledge of engineering mathematics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Assignment I (written report) | 15 | written | |
| Assignment II (oral presentation) | 10 | oral | 15-20 minutes |
| Assignment III (written report) | 15 | written | |
| Exam | 60 | written | 120 minutes |
Exam description
Examination consists of two parts:
- coursework with a maximum of 40 marks (two written reports with each 15 points and one oral presentation with 10 points); prepared and marked as a group of 3-5 students
- written 2h exam (120 minutes) with a maximum of 60 marks
To pass the module at least 50% of marks have to be attained. The maximum of marks attainable is 100.
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
- coursework with a maximum of 40 marks (two written reports with each 15 points and one oral presentation with 10 points); prepared and marked as a group of 3-5 students
- written 2h exam (120 minutes) with a maximum of 60 marks
To pass the module at least 50% of marks have to be attained. The maximum of marks attainable is 100.
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 50.
Registration procedures
Students can enrol in the module in the first lectures via a list of participants.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Einführung in die Mechanik der Laminat- und Sandwichtragwerke, Altenbach et al.
- Konstruieren mit Faserkunststoffverbunden, Schürmann.
- Mechanics of Laminated Composite Plates and Shells, Reddy.
- projektrelevante Literatur wird im Rahmen der VL bekannt gegeben.
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified