Mechanics of Fibre Composite MaterialsModule description #50427 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
| Module / Version | #50427 / #6 |
|---|---|
| Validity | Winter semester 2022/23 – Winter semester 2026/27 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Köllner, Anton |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35374100 FG Mechanik insbesondere Stabilität und Versagen funktionsoptimierter Strukturen |
Contact
| Office | MS 2 |
|---|---|
| Contact person | Köllner, Anton |
| E-mail address | anton.koellner@tu-berlin.de |
| Website | https://www.tu.berlin/svfs/studium-lehre/lehrveranstaltungen/mechanik-der-faserverbundwerkstoffe/ |
Learning outcomes
The learning outcomes of the module are:
- Understanding the composition of fibre reinforced polymer composites and the mechanical behaviour of the constituents,
- Understanding the mechanical behaviour of anisotropic media, in particular multi-layered composite structures
- Analysing and evaluating the effect of stacking sequences on the mechanical behaviour of composite plates; optimize layups for certain loading scenarios
- Analysing the buckling behaviour of slender composite structures (struts, plates)
- Evaluating buckling loads and post-buckling behaviour for various plate configurations and loading conditions
- Examining and breakdown of failure mechanisms in composite structures
- Analysing and evaluating failure loads for composite structural components
- Understanding the composition of fibre reinforced polymer composites and the mechanical behaviour of the constituents,
- Understanding the mechanical behaviour of anisotropic media, in particular multi-layered composite structures
- Analysing and evaluating the effect of stacking sequences on the mechanical behaviour of composite plates; optimize layups for certain loading scenarios
- Analysing the buckling behaviour of slender composite structures (struts, plates)
- Evaluating buckling loads and post-buckling behaviour for various plate configurations and loading conditions
- Examining and breakdown of failure mechanisms in composite structures
- Analysing and evaluating failure loads for composite structural components
Content
- Introduction to fibre reinforced polymer (FRP) composites (concept, examples, materials and their characteristics, manufacturing processes)
- Review of solid mechanics (CAUCHY stress tensor, HOOKE’s law in 3D for anisotropic material behaviour)
- CLASSICAL LAMINATE THEORY (coordinate transformation, stress-strain relationship for unidirectional plies and multi-layered structures)
- Stability failure of composite structures (review elastic stability theory, buckling and post-buckling of composite struts and plates)
- Material failure in composites (failure mechanisms in composites, failure criteria for orthotropic layers, physically-based failure models)
- Review of solid mechanics (CAUCHY stress tensor, HOOKE’s law in 3D for anisotropic material behaviour)
- CLASSICAL LAMINATE THEORY (coordinate transformation, stress-strain relationship for unidirectional plies and multi-layered structures)
- Stability failure of composite structures (review elastic stability theory, buckling and post-buckling of composite struts and plates)
- Material failure in composites (failure mechanisms in composites, failure criteria for orthotropic layers, physically-based failure models)
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Mechanics of Fibre Composite Materials | Project | 0530 L 047 | Winter semester | [en] | 4 | ISIS |
Workload and credit points
Mechanics of Fibre Composite Materials (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module contains weekly lectures and four tutorials. Coursework in the form of three assignments will be prepared by groups of 3-5 students. Two assignments need to be prepared in the form of a written report and one assignment as an oral presentation. In the winter term 2022/23, the module will be offered in hybrid form. Lectures will be provided in recorded form (except of the first lecture which will take place in person) and tutorials will take place in person. Detailed information about the schedule will be provided in the first lecture.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
required: Kenntnisse in Statik und elementarer Festigkeitslehre (statics and strength of materials) oder Mechanik E, desirable: good knowledge of engineering mathematics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Assignment I (written report) | 15 | written | |
| Assignment II (oral presentation) | 10 | oral | 15-20 minutes |
| Assignment III (written report) | 15 | written | |
| Exam | 60 | written | 90 minutes |
Exam description
Examination consists of two parts:
- coursework with a maximum of 40 marks (two written reports with each 15 points and one oral presentation with 10 points); prepared and marked as a group of 3-5 students
- written 2h exam (120 minutes) with a maximum of 60 marks
To pass the module at least 50% of marks have to be attained. The maximum of marks attainable is 100.
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
- coursework with a maximum of 40 marks (two written reports with each 15 points and one oral presentation with 10 points); prepared and marked as a group of 3-5 students
- written 2h exam (120 minutes) with a maximum of 60 marks
To pass the module at least 50% of marks have to be attained. The maximum of marks attainable is 100.
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 50.
Registration procedures
Students can enrol in the module in the first lectures via a list of participants.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Einführung in die Mechanik der Laminat- und Sandwichtragwerke, Altenbach et al.
- Konstruieren mit Faserkunststoffverbunden, Schürmann.
- Mechanics of Laminated Composite Plates and Shells, Reddy.
- projektrelevante Literatur wird im Rahmen der VL bekannt gegeben.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 1. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik |
| WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik | |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.2 Mechanik | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| WS 2026/27 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung |
| SS 2024 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung | |
| WS 2024/25 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung | |
| SS 2025 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung | |
| WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung | |
| SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung | |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Konstruktion und Gestaltung | |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Profilmodule › Werkstoffe |
| SS 2024 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| WS 2024/25 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| SS 2025 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Werkstoffe | |
| Naval Architecture and Ocean Engineering StuPo 2017 | SS 2025 | 2. Profilmodule › 2.3 Strukturanalyse |
| WS 2025/26 | 2. Profilmodule › 2.3 Strukturanalyse | |
| SS 2026 | 2. Profilmodule › 2.3 Strukturanalyse | |
| WS 2026/27 | 2. Profilmodule › 2.3 Strukturanalyse | |
| Patent Engineering StuPO 2015 | SS 2025 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.1. Werkstoffe |
| WS 2025/26 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.1. Werkstoffe | |
| SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.1. Werkstoffe | |
| WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.1. Werkstoffe | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 2. Werkstofftechnik |
| WS 2025/26 | 2. Werkstofftechnik | |
| SS 2026 | 2. Werkstofftechnik | |
| WS 2026/27 | 2. Werkstofftechnik | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik |
| WS 2025/26 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik | |
| SS 2026 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik | |
| WS 2026/27 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Schiffs- und Meerestechnik |
| WS 2025/26 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Schiffs- und Meerestechnik | |
| SS 2026 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Schiffs- und Meerestechnik | |
| WS 2026/27 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Schiffs- und Meerestechnik | |
| Transport Systems StuPO 2018 | SS 2025 | B. Studienrichtungen › Schiffs- und Meerestechnik › 4. Vertiefungs- und Anwendungsbereich |
| WS 2025/26 | B. Studienrichtungen › Schiffs- und Meerestechnik › 4. Vertiefungs- und Anwendungsbereich | |
| SS 2026 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich | |
| WS 2026/27 | B. Studienrichtungen › Schiffs- und Meerestechnik › 4. Vertiefungs- und Anwendungsbereich | |
| Vehicle Engineering StuPO 2017 | SS 2025 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
| WS 2025/26 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden | |
| SS 2026 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden | |
| WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Miscellaneous
Not specified