Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Technologies of Virtual Product Development IModule description #50606 / Version 4

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v5)
Module / Version#50606 / #4
ValiditySummer semester 2025 – Summer semester 2025
Available language(s)English, German
Credit points6
Person responsible for the moduleStark, Rainer
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Werkzeugmaschinen und Fabrikbetrieb (IWF)
Academic chair35361500 FG Industrielle Informationstechnik

Contact

OfficePTZ 4
Contact personCintuglu, Burak Kaan
E-mail addressLehre.TViProI@iit.tu-berlin.de
Websitehttps://www.tu.berlin/iit/studium-lehre/master/technologien-der-virtuellen-produktentstehung-i

Learning outcomes

After successfully completing the module, students will be able to:

Apply geometry processing and systematic design principles
- Analyze, model, and optimize complex geometries.
- Utilize systematic design principles for the structured development of technical solutions.

Implement requirements management in product development
- Systematically capture, document, and analyze requirements.
- Use requirements management methods to guide the development process.

Effectively use CAD and CAE tools
- Model components and assemblies using modern CAD systems.
- Apply CAE methods for simulation and optimization of components.

Integrate knowledge-based engineering (KBE)
- Apply rule-based modeling approaches to automate design processes.
- Incorporate design guidelines and engineering knowledge into digital models.

Utilize product data management (PDM) and virtual reality (VR) in the development process

Practical use of the Siemens PLM suite
- Conduct modeling of components, assemblies, and freeform geometries.
- Design sheet metal components considering manufacturing constraints.
- Create, manage, and organize product structures within a PDM system.

Through these acquired competencies, students will be equipped to efficiently use modern development tools and systematically structure product development processes

Content

In the first part of the course, students will acquire in-depth knowledge on topics such as geometry processing, systematic design, requirements management, Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), and Knowledge-Based Engineering (KBE).
Additionally, students will be introduced to systems for product data management and virtual reality (VR).

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Technologien der virtuellen Produktentwicklung ILecture0536 L 400 Winter semester[de]2 ISIS
Technologien der virtuellen Produktentwicklung IExercise402 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Technologien der virtuellen Produktentwicklung I (Lecture) 1

All groups of this course in the catalog

Technologien der virtuellen Produktentwicklung I (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Technologien der virtuellen Produktentwicklung I (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
pre-/postpreparation154 h60 h
90 h

Technologien der virtuellen Produktentwicklung I (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance time152 h30 h
pre-/postpreparation154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lecture (VL):
- Traditional lecture format with presentation of content and numerous practical examples
- Expert talks from industry professionals

Exercise (UE):
- Explanation of theoretical concepts and background, visualization, review, and discussion of lecture content using examples
- Presentation and solution approaches in groups, frontal teaching for all participants, followed by supervised work on exercises

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) Mandatory prerequisites:
None

b) Recommended prerequisites:
Prior knowledge of CAD modeling.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Documented Practical Performance Exercise: 3 ECTS Credits50practical3 ECTS
Exam Lecture: 60 minutes, 3 ECTS credits50written3 ECTS

Exam description

A maximum of 100 points can be achieved. The grading scale is as follows:

≥ 95 points → 1.0
≥ 90 points → 1.3
≥ 85 points → 1.7
≥ 80 points → 2.0
≥ 75 points → 2.3
≥ 70 points → 2.7
≥ 65 points → 3.0
≥ 60 points → 3.3
≥ 55 points → 3.7
≥ 50 points → 4.0
< 50 points → 5.0

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration for the course (Lecture and Exercise):
Via ISIS of TU Berlin (www.isis.tu-berlin.de). The assignment of project groups will take place in the ISIS course during the first lecture week.

Registration for the exam:
Details will be communicated in the ISIS course.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – https://www.tu.berlin/iit/studium-lehre/master/technologien-der-virtuellen-produktentstehung-i

Recommended literature

  • Spur, G.; Krause, F.-L (1997): Das virtuelle Produkt. Carl Hanser Verlag München
  • Stark, R. (2022): Virtual Product Creation in Industry. Springer-Verlag GmbH Germany

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20251. Ingenieurwissenschaftliche Methoden › 1.1 Allgemeine und vertiefende ingenieurwissenschaftliche Methoden
Biomedical Engineering
StuPO 2018
SS 20252. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
SS 20256. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht)
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
Patent Engineering
StuPO 2015
SS 20252.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
Production Engineering
StuPO 2018 (09.05.2018)
SS 20253. Informationstechnik
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Maschinenbau › Maschinenbau › Profilmodule
Transport Systems
StuPO 2018
SS 2025A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
Eligible Study Programs:
- Bachelor Mechanical Engineering (Elective)
- Master Mechanical Engineering (Elective)
- Master Production Engineering (Elective)
- Master Biomedical Engineering (Elective)
- Bachelor Transport Systems (Elective)
- Master Transport Systems (Elective)
- Master Vehicle Engineering (Elective)
- Master Aeronautics and Astronautics (Elective)
- Bachelor Computational Engineering Science (Elective)
- Master Computational Engineering science (Elective)
- Bachelor Industrial Engineering and Management (Elective)

The module is open to all other students.

Miscellaneous

Not specified