Modelling of Powertrain ThermodynamicsModule description #50614 / Version 9
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English, German
| Module / Version | #50614 / #9 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Biet, Clemens |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Land- und Seeverkehr |
| Academic chair | 35331100 FG Fahrzeugantriebe |
Contact
| Office | CAR-B 1 |
|---|---|
| Contact person | Durmus, Fatih |
| E-mail address | fatih.durmus@tu-berlin.de |
| Website | http://www.tu.berlin/imef |
Learning outcomes
Simulation is an indispensable tool in the development and optimisation of powertrain components. With the help of simulation, concepts can be reliably evaluated in the early phases of product development so that undesirable developments can be recognised at an early stage. For optimisation tasks, the influence of various parameters can be investigated on the model, thus reducing, if not replacing, the time spent on the test bench.
The exercise course serves to deepen the knowledge acquired in the lecture. The aim is to use a model of a modern combustion engine to investigate internal engine thermodynamic processes in more detail. For this purpose, a cylinder model must be created, correctly calibrated and tested in a suitable modelling environment (Matlab/Simulink®). A model of a fuel cell-based drive is also created and analysed. The combustion engine and the fuel cell are then compared on the basis of a vehicle model. A short introduction to Matlab/Simulink® is given at the beginning of the semester.
After successfully completing the module, students will have the following knowledge:
- Filling and draining method within powertrain simulation
- Thermodynamic knowledge of the real working process calculation of combustion engines.
- Modelling approaches to the phenomena of heat transfer, combustion process and charge exchange
- Modelling of combustion engines with alternative fuels (e.g. CNG or H2)
- Thermodynamic pressure curve analysis
- Knowledge of the function and modelling of fuel cells
- Thermodynamic knowledge of turbocharging and the interaction between the turbocharging unit and the combustion engine and fuel cell
- Basics of modelling the battery and various mechanical vehicle components
Skills:
- Modelling and simulation with the simulation tool Matlab/Simulink®
- Parameterising, calibrating and validating different models
- Setting up models for a powertrain simulation (purely electric and conventional)
Competences:
- Dealing with numerical simulations in the time domain
- Ability to set up models of technical systems (modelling)
- Selection of an appropriate modelling depth of the individual subcomponents for different problems
- Ability to analyse thermodynamic internal motor relationships
The exercise course serves to deepen the knowledge acquired in the lecture. The aim is to use a model of a modern combustion engine to investigate internal engine thermodynamic processes in more detail. For this purpose, a cylinder model must be created, correctly calibrated and tested in a suitable modelling environment (Matlab/Simulink®). A model of a fuel cell-based drive is also created and analysed. The combustion engine and the fuel cell are then compared on the basis of a vehicle model. A short introduction to Matlab/Simulink® is given at the beginning of the semester.
After successfully completing the module, students will have the following knowledge:
- Filling and draining method within powertrain simulation
- Thermodynamic knowledge of the real working process calculation of combustion engines.
- Modelling approaches to the phenomena of heat transfer, combustion process and charge exchange
- Modelling of combustion engines with alternative fuels (e.g. CNG or H2)
- Thermodynamic pressure curve analysis
- Knowledge of the function and modelling of fuel cells
- Thermodynamic knowledge of turbocharging and the interaction between the turbocharging unit and the combustion engine and fuel cell
- Basics of modelling the battery and various mechanical vehicle components
Skills:
- Modelling and simulation with the simulation tool Matlab/Simulink®
- Parameterising, calibrating and validating different models
- Setting up models for a powertrain simulation (purely electric and conventional)
Competences:
- Dealing with numerical simulations in the time domain
- Ability to set up models of technical systems (modelling)
- Selection of an appropriate modelling depth of the individual subcomponents for different problems
- Ability to analyse thermodynamic internal motor relationships
Content
The content of the lectures and exercises are closely linked so that the content taught is applied and consolidated in a timely manner.
The following topics are covered during the semester:
- Numerical basics
- Basic thermodynamic equations
- Modelling of a gas exchange line system with the filling and emptying method
- Modelling of a fuel cell (incl. electric motor & battery)
- Modelling of an internal combustion engine
- Modelling of a turbocharger
- Interaction of engine or fuel cell and turbocharger
- Overall powertrain system
If possible, a test field inspection in the CAR-B is carried out as part of the lecture in order to establish the connection between the simulation methods learnt and experimental methods.
The following topics are covered during the semester:
- Numerical basics
- Basic thermodynamic equations
- Modelling of a gas exchange line system with the filling and emptying method
- Modelling of a fuel cell (incl. electric motor & battery)
- Modelling of an internal combustion engine
- Modelling of a turbocharger
- Interaction of engine or fuel cell and turbocharger
- Overall powertrain system
If possible, a test field inspection in the CAR-B is carried out as part of the lecture in order to establish the connection between the simulation methods learnt and experimental methods.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Thermodynamiksimulation von Fahrzeugantrieben | Integrated course | 3533 L 747 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Thermodynamiksimulation von Fahrzeugantrieben (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures:
- Frontal teaching to impart physical-technical knowledge of the combustion engine and the fuel cell, in particular the modelling of internal processes
Exercises:
- Consolidation, deepening and application of the lecture material by working on the computer
Homework:
- Partial aspects of the overall model are modelled and documented
- as individual and group work
- Frontal teaching to impart physical-technical knowledge of the combustion engine and the fuel cell, in particular the modelling of internal processes
Exercises:
- Consolidation, deepening and application of the lecture material by working on the computer
Homework:
- Partial aspects of the overall model are modelled and documented
- as individual and group work
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
obligatory:
Knowledge in the field of thermodynamics and fluid mechanics
Module ‘Internal combustion engines 1’ or comparable
desirable:
Knowledge in the field of numerical mathematics
Knowledge in the field of thermodynamics and fluid mechanics
Module ‘Internal combustion engines 1’ or comparable
desirable:
Knowledge in the field of numerical mathematics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 45 | written | 45 |
| oral consultation | 55 | flexibel | 45min |
Exam description
A total of up to 100 portfolio points can be achieved in the module. The conversion into grades is based on the following table:
Greater than or equal to 95 1.0
Greater than or equal to 90 1.3
More than or equal to 85 1.7
More than or equal to 80 2.0
More than or equal to 75 2.3
More than or equal to 70 2.7
More than or equal to 65 3.0
More or equal to 60 3.3
More than or equal to 55 3.7
More than or equal to 50 4.0
Less than 50 5.0
Greater than or equal to 95 1.0
Greater than or equal to 90 1.3
More than or equal to 85 1.7
More than or equal to 80 2.0
More than or equal to 75 2.3
More than or equal to 70 2.7
More than or equal to 65 3.0
More or equal to 60 3.3
More than or equal to 55 3.7
More than or equal to 50 4.0
Less than 50 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration in Qispos or at the Examination Office is carried out in accordance with the regulations of the relevant examination regulations.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Es gibt kein ausgearbeitetes Skript, aber die Vorlesungsfolien werden in ISIS hochgeladen.
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Systems Automotive Systems (M. Sc.) - StuPO 2017 | SS 2025 | Wahlpflichtbereich |
| WS 2025/26 | Wahlpflichtbereich | |
| SS 2026 | Wahlpflichtbereich | |
| WS 2026/27 | Wahlpflichtbereich | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.5 Thermodynamik |
| WS 2025/26 | 06. Schwerpunkte › 6.5 Thermodynamik | |
| SS 2026 | 06. Schwerpunkte › 6.5 Thermodynamik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.1 Numerik und Simulation › 2.1a Kernbereich |
| WS 2025/26 | 2.1 Numerik und Simulation › 2.1a Kernbereich | |
| SS 2026 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.1 Numerik und Simulation › 2.1a Kernbereich |
| WS 2025/26 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich | |
| SS 2026 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich | |
| WS 2026/27 | 2.1 Numerik und Simulation › 2.1a Kernbereich | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik | |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.5 Thermodynamik | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Kernmodule › Verbrennungskraftmaschinen |
| WS 2025/26 | Wahlpflichtmodule › Kernmodule › Verbrennungskraftmaschinen | |
| SS 2026 | Wahlpflichtmodule › Kernmodule › Verbrennungskraftmaschinen | |
| WS 2026/27 | Wahlpflichtmodule › Kernmodule › Verbrennungskraftmaschinen | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Thermodynamik |
| WS 2025/26 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Thermodynamik | |
| SS 2026 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule | |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik | |
| Vehicle Engineering StuPO 2017 | SS 2025 | 2. Profilmodule › 2.2 Kraftfahrzeugtechnik |
| WS 2025/26 | 2. Profilmodule › 2.2 Kraftfahrzeugtechnik | |
| SS 2026 | 2. Profilmodule › 2.2 Kraftfahrzeugtechnik | |
| WS 2026/27 | 2. Profilmodule › 2.2 Kraftfahrzeugtechnik |
Miscellaneous
None