Modeling and Simulation of Turbulent Flows (CFD4)Module description #50619 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #50619 / #7 |
|---|---|
| Validity | Winter semester 2025/26 – Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Busse, Angela |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Strömungsmechanik und Technische Akustik |
| Academic chair | 35311400 FG Numerische Fluiddynamik |
Contact
| Office | MB 1 |
|---|---|
| Contact person | Busse, Angela |
| E-mail address | office@tnt.tu-berlin.de |
| Website | http://www.tu.berlin/nfd |
Learning outcomes
The aim of this module is to give an introduction to the basic concepts of turbulence, to present common modelling approaches for the numerical treatment of turbulent flows and to provide insight into their influencing parameters. The underlying physics upon which turbulence models are built will be discussed keeping in mind application-oriented issues. Notably, the students will be enabled to critically evaluate and discuss the modelling results. For this purpose, the study of individual models and the implementation of evaluation criteria will be required. The students will compare different models and methods of solution against each other and apply them to different flow problems. They shall also be enabled to systematically solve new simulation cases using appropriate methods.
Content
Turbulent transport mechanisms are based on the interaction of temporal and spatial fluctuations of pressure, density and velocity, which are spread over a wide range of scales. A detailed prediction of these extremely complex phenomena requires the resolution of the entire spectrum of turbulent scales and consequently an extremely fine resolution in time and space is needed. Since, for industrial applications, this is often not possible due to extremely high computational costs, many simulation approaches have been developed which model the influence of the non-resolved turbulent fluctuations on the mean flow instead of computing them directly. However, the quality and efficiency of these approaches is strongly problem-dependent, and an appropriate calibration of model and simulation parameters is required.
Focus of this course are the mathematical principles, prerequisites and properties of turbulence modelling approaches, in the order of the degree of modelling complexity and resource usage. Following an introduction of the basic concepts of turbulent flows, the most widely used modelling approaches are classified and examined from a physical point of view with regards to their importance and applicability. In addition, the course deals with practical aspects of flow simulation (boundary conditions, grid generation, evaluation of the results, etc.). The understanding of the usability and practical relevance of individual methods will be supported by their implementation and investigation in the context of simple, but significant, flow configurations.
Focus of this course are the mathematical principles, prerequisites and properties of turbulence modelling approaches, in the order of the degree of modelling complexity and resource usage. Following an introduction of the basic concepts of turbulent flows, the most widely used modelling approaches are classified and examined from a physical point of view with regards to their importance and applicability. In addition, the course deals with practical aspects of flow simulation (boundary conditions, grid generation, evaluation of the results, etc.). The understanding of the usability and practical relevance of individual methods will be supported by their implementation and investigation in the context of simple, but significant, flow configurations.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Modellbildung und Simulation turbulenter Strömungen | Integrated course | 0531 L 330 | Summer semester | [en] | 4 | ISIS |
Workload and credit points
Modellbildung und Simulation turbulenter Strömungen (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Presentation and discussion of the theoretical content and partial derivation of different methods and models, as well as approaches to the solution. Exercises at the computer aimed to perform a complete data post-processing and model testing in indicative turbulent flow configurations. Several programs and data sets will be provided.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) compulsory: fluid dynamics, general knowledge of programming languages, numerical analysis.
b) desirable: CFD2, knowledge of MATLAB and/or GNU Octave computing environment.
b) desirable: CFD2, knowledge of MATLAB and/or GNU Octave computing environment.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Oral Exam | 40 | oral | 20 min |
| Projects | 60 | practical | 3 weeks per project (total of 3 projects) |
Exam description
Projects (60 Points)
Oral Exam (40 Points)
Grades:
95,0 to 100,0 Points ... 1,0
90,0 to 94,9 Points ..... 1,3
85,0 to 89,9 Points ..... 1,7
80,0 to 84,9 Points ..... 2,0
75,0 to 79,9 Points ..... 2,3
70,0 to 74,9 Points ..... 2,7
65,0 to 69,9 Points ..... 3,0
60,0 to 64,9 Points ..... 3,3
55,0 to 59,9 Points ..... 3,7
50,0 to 54,9 Points ..... 4,0
0,0 to 49,9 Points ....... 5,0
Oral Exam (40 Points)
Grades:
95,0 to 100,0 Points ... 1,0
90,0 to 94,9 Points ..... 1,3
85,0 to 89,9 Points ..... 1,7
80,0 to 84,9 Points ..... 2,0
75,0 to 79,9 Points ..... 2,3
70,0 to 74,9 Points ..... 2,7
65,0 to 69,9 Points ..... 3,0
60,0 to 64,9 Points ..... 3,3
55,0 to 59,9 Points ..... 3,7
50,0 to 54,9 Points ..... 4,0
0,0 to 49,9 Points ....... 5,0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Online registration via ISIS and via
https://anmeldung.cfd.tu-berlin.de/cfd4
https://anmeldung.cfd.tu-berlin.de/cfd4
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Ferziger & Peric: Computational Methods for Fluid Dynamics
- Fröhlich: Large-Eddy Simulation turbulenter Strömungen
- Piquet: Turbulent Flows: Models and Physics
- Pope: Turbulent Flows
- Rotta: Turbulente Strömungen
- Wilcox: Turbulence Modelling for CFD
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2025/26 | 3. Profilmodule › 3.3 Aerodynamik |
| Engineering Science StuPO 09.01.2012 | WS 2025/26 | 06. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule |
| Engineering Science StuPO 2007 (19.12.2007) | WS 2025/26 | 2.2 Strömungsmechanik › 2.2b Ergänzungsbereich |
| Engineering Science StuPO 2020 | WS 2025/26 | 2.2 Strömungsmechanik › 2.2b Ergänzungsbereich |
| Engineering Science StuPO 2020 | WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Strömungsmechanik |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Luft- und Raumfahrttechnik |
Miscellaneous
Not specified