Virtual Engineering in IndustryModule description #50637 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #50637 / #2 |
|---|---|
| Validity | SS 2015 – Summer semester 2021 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Stark, Rainer |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361500 FG Industrielle Informationstechnik |
Contact
| Office | PTZ 4 |
|---|---|
| Contact person | Cintuglu, Burak Kaan |
| E-mail address | Lehre.VEI@iit.tu-berlin.de |
| Website | https://www.tu.berlin/iit/studium-lehre/master/virtual-engineering-in-industry |
Learning outcomes
Product modeling, model analysis and information management within the engineering process are subject of this course. For competency development, different methods for virtual product creation will be imparted within industrial use case scenarios.
The following additional competencies are key within the course curriculum:
- design and analysis task completion
- team collaboration to achieve project tasks
- design review preparation
- solution presentation and product verification mindset
- successful and problem orientated usage of modern virtual engineering toolsets and methods.
The following additional competencies are key within the course curriculum:
- design and analysis task completion
- team collaboration to achieve project tasks
- design review preparation
- solution presentation and product verification mindset
- successful and problem orientated usage of modern virtual engineering toolsets and methods.
Content
This course concerns advanced CAD techniques in solid, surface and assembly modeling combined with CAE verification methods as well as systems engineering .
Furthermore the topic of product data management will be addressed as well as methods of digital manufacturing process planning. The software of Dassault-Systems V6 is used as a integrative backbone of this course.
Furthermore the topic of product data management will be addressed as well as methods of digital manufacturing process planning. The software of Dassault-Systems V6 is used as a integrative backbone of this course.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Virtual Engineering in Industry | Integrated course | Winter semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Virtual Engineering in Industry (Integrated course) 1
- Virtual Engineering in Industry (Integrierte Veranstaltung) Termingruppe 1
Workload and credit points
Virtual Engineering in Industry (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Projektbearbeitung | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Necessary domain specific knowledge will be taught within a block course at the beginning of the semester through interplay of lectures and practical exercises.
Internalization of methods and knowledge will be achieved through an independent project work within an industrial use case scenario. Preparation and conduction of design reviews is part of this course.
Assistance of participants through active coaching and workshops.
Internalization of methods and knowledge will be achieved through an independent project work within an industrial use case scenario. Preparation and conduction of design reviews is part of this course.
Assistance of participants through active coaching and workshops.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Students must have fundamental experience in CAD-modeling (eg. ProEngineer, NX, CATIA or equivalent) and knowledge of IT-Basics (MS Office);
Knowledge about and skills within product data management software and engineering experience is useful.
Knowledge about and skills within product data management software and engineering experience is useful.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Protokollierte praktische Leistung Übung 5LP | 83 | ||
| Test 30min, 1LP | 17 |
Exam description
Es können maximal 100 Punkte erreicht werden.
Mehr oder gleich 95 Punkte ... 1,0
Mehr oder gleich 90 Punkte ... 1,3
Mehr oder gleich 85 Punkte ... 1,7
Mehr oder gleich 80 Punkte ... 2,0
Mehr oder gleich 75 Punkte ... 2,3
Mehr oder gleich 70 Punkte ... 2,7
Mehr oder gleich 65 Punkte ... 3,0
Mehr oder gleich 60 Punkte ... 3,3
Mehr oder gleich 55 Punkte ... 3,7
Mehr oder gleich 50 Punkte ... 4,0
Weniger als 50 Punkte ... 5,0
Mehr oder gleich 95 Punkte ... 1,0
Mehr oder gleich 90 Punkte ... 1,3
Mehr oder gleich 85 Punkte ... 1,7
Mehr oder gleich 80 Punkte ... 2,0
Mehr oder gleich 75 Punkte ... 2,3
Mehr oder gleich 70 Punkte ... 2,7
Mehr oder gleich 65 Punkte ... 3,0
Mehr oder gleich 60 Punkte ... 3,3
Mehr oder gleich 55 Punkte ... 3,7
Mehr oder gleich 50 Punkte ... 4,0
Weniger als 50 Punkte ... 5,0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration on ISIS-System (https://www.isis.tu-berlin.de) is open at the beginning of the winter term (semester)
Please send a digital verification of your fundamental CAD-skills to the course-leader in ISIS-System.
Please send a digital verification of your fundamental CAD-skills to the course-leader in ISIS-System.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.iit.tu-berlin.de; https://www.isis.tu-berlin.de/
Recommended literature
- Krause, F.-L. (2007). The Future of Product Development. Berlin: Springer.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2020 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
| WS 2020/21 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| SS 2021 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
Geeignete Studiengänge:
- Master Maschinenbau (WP)
- Master Produktionstechnik (WP)
- Master Informationstechnik im Maschinenwesen (WP)
- Master Fahrzeugtechnik (WP)
- Master Luft- und Raumfahrttechnik (WP)
- Master Wirtschaftsingenieurwesen Maschinenbau (WP)
Das Modul steht allen anderen Hörern offen.
- Master Maschinenbau (WP)
- Master Produktionstechnik (WP)
- Master Informationstechnik im Maschinenwesen (WP)
- Master Fahrzeugtechnik (WP)
- Master Luft- und Raumfahrttechnik (WP)
- Master Wirtschaftsingenieurwesen Maschinenbau (WP)
Das Modul steht allen anderen Hörern offen.
Miscellaneous
This course is predominantly offered for master students of higher semesters.