Virtual Engineering in IndustryModule description #50637 / Version 4
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #50637 / #4 |
|---|---|
| Validity | Summer semester 2022 – Summer semester 2024 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Stark, Rainer |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361500 FG Industrielle Informationstechnik |
Contact
| Office | PTZ 4 |
|---|---|
| Contact person | Cintuglu, Burak Kaan |
| E-mail address | Lehre.VEI@iit.tu-berlin.de |
| Website | https://www.tu.berlin/iit/studium-lehre/master/virtual-engineering-in-industry |
Learning outcomes
Product modeling, model analysis and information management within the engineering process are subject of this course. For competency development, different methods for virtual product creation will be imparted within industrial use case scenarios.
The following additional competencies are key within the course curriculum:
- design and analysis task completion
- team collaboration to achieve project tasks
- design review preparation
- solution presentation and product verification mindset
- successful and problem orientated usage of modern virtual engineering toolsets and methods.
The following additional competencies are key within the course curriculum:
- design and analysis task completion
- team collaboration to achieve project tasks
- design review preparation
- solution presentation and product verification mindset
- successful and problem orientated usage of modern virtual engineering toolsets and methods.
Content
This course concerns advanced CAD techniques in solid, surface and assembly modeling combined with CAE verification methods as well as systems engineering .
Furthermore the topic of product data management will be addressed as well as methods of digital manufacturing process planning. The software of Dassault-Systems V6 is used as a integrative backbone of this course.
Furthermore the topic of product data management will be addressed as well as methods of digital manufacturing process planning. The software of Dassault-Systems V6 is used as a integrative backbone of this course.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Virtual Engineering in Industry | Integrated course | Winter semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Virtual Engineering in Industry (Integrated course) 1
- Virtual Engineering in Industry (Integrierte Veranstaltung) Termingruppe 1
Workload and credit points
Virtual Engineering in Industry (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Project work | 15 | 10 h | 150 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Necessary domain specific knowledge will be taught within a block course at the beginning of the semester through interplay of lectures and practical exercises.
Internalization of methods and knowledge will be achieved through an independent project work within an industrial use case scenario. Preparation and conduction of design reviews is part of this course.
Assistance of participants through active coaching and workshops.
Internalization of methods and knowledge will be achieved through an independent project work within an industrial use case scenario. Preparation and conduction of design reviews is part of this course.
Assistance of participants through active coaching and workshops.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This Module is open to all students having applied for Master (M.Sc.)
Students must have fundamental experience in CAD-modeling (eg. ProEngineer, NX, CATIA or equivalent) and knowledge of IT-Basics (MS Office);
Knowledge about and skills within product data management software and engineering experience is useful.
Students must have fundamental experience in CAD-modeling (eg. ProEngineer, NX, CATIA or equivalent) and knowledge of IT-Basics (MS Office);
Knowledge about and skills within product data management software and engineering experience is useful.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Project Work, 5LP | 83 | practical | |
| Test 30 min, 1LP | 17 | written |
Exam description
A maximum of 100 points can be achieved.
More or equal to 95 points ... 1.0
More than or equal to 90 points ... 1.3
More than or equal to 85 points ... 1.7
More than or equal to 80 points ... 2.0
More than or equal to 75 points ... 2.3
More than or equal to 70 points ... 2.7
More than or equal to 65 points ... 3.0
More than or equal to 60 points ... 3.3
More than or equal to 55 points ... 3.7
More than or equal to 50 points ... 4.0
Less than 50 points ... 5.0
More or equal to 95 points ... 1.0
More than or equal to 90 points ... 1.3
More than or equal to 85 points ... 1.7
More than or equal to 80 points ... 2.0
More than or equal to 75 points ... 2.3
More than or equal to 70 points ... 2.7
More than or equal to 65 points ... 3.0
More than or equal to 60 points ... 3.3
More than or equal to 55 points ... 3.7
More than or equal to 50 points ... 4.0
Less than 50 points ... 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Course registration (lecture and exercise):
ISIS of the Technical University of Berlin (www.isis.tu-berlin.de), the division of the project teams takes place at ISIS in the first week of lectures.
Registration for the exam: at the respective examination office or via QISPOS, the registration deadlines are specified in the relevant training rules.
ISIS of the Technical University of Berlin (www.isis.tu-berlin.de), the division of the project teams takes place at ISIS in the first week of lectures.
Registration for the exam: at the respective examination office or via QISPOS, the registration deadlines are specified in the relevant training rules.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – http://www.iit.tu-berlin.de; https://www.isis.tu-berlin.de/
Recommended literature
- Engineering Design: A Systematic Approach, ISBN-10: 1846283183
- Krause, F.-L. (2007). The Future of Product Development. Berlin: Springer.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2022 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design |
| WS 2022/23 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| SS 2023 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| WS 2023/24 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| SS 2024 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Engineering Design | |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| SS 2024 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
Geeignete Studiengänge:
- Master Maschinenbau (WP)
- Master Produktionstechnik (WP)
- Master Informationstechnik im Maschinenwesen (WP)
- Master Fahrzeugtechnik (WP)
- Master Luft- und Raumfahrttechnik (WP)
- Master Wirtschaftsingenieurwesen Maschinenbau (WP)
Das Modul steht allen anderen Hörern offen.
- Master Maschinenbau (WP)
- Master Produktionstechnik (WP)
- Master Informationstechnik im Maschinenwesen (WP)
- Master Fahrzeugtechnik (WP)
- Master Luft- und Raumfahrttechnik (WP)
- Master Wirtschaftsingenieurwesen Maschinenbau (WP)
Das Modul steht allen anderen Hörern offen.
Miscellaneous
This course is predominantly offered for master students of higher semesters.