Fundamentals of Control EngineeringModule description #50700 / Version 4
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50700 / #4 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Maas, Jürgen |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351400 FG Elektromechanische Konstruktionen |
Contact
| Office | EW 3 |
|---|---|
| Contact person | Maas, Jürgen |
| E-mail address | juergen.maas@tu-berlin.de |
| Website | http://www.emk.tu-berlin.de |
Learning outcomes
After successfully completing the module, students are able to:
- independently analyze the behavior of linear, time-invariant systems, including new systems that have not been previously covered.
- apply the acquired scientific skills as a foundation for advanced courses, research work, and industrial practice.
- select and design appropriate controllers for single-input single-output systems based on the behavior of the plant and the specifications for closed-loop performance.
- independently apply the learned design methods to new systems.
- independently analyze the behavior of linear, time-invariant systems, including new systems that have not been previously covered.
- apply the acquired scientific skills as a foundation for advanced courses, research work, and industrial practice.
- select and design appropriate controllers for single-input single-output systems based on the behavior of the plant and the specifications for closed-loop performance.
- independently apply the learned design methods to new systems.
Content
- Introduction to control engineering for linear, time-invariant (LTI) systems.
- Motivation for the need to control system, introduction of different control loop structures, and derivation of fundamental requirements for control systems.
- Introduction to system-theoretic concepts as well as established modeling techniques in the time and frequency domains, including symbolic representations for LTI plants and controllers.
- Analysis of control loops to translate fundamental requirements into quantitative specifications for the synthesis of LTI control systems.
- Design of LTI controllers for single-input single-output systems using classical design methods in the frequency domain (e.g., frequency response methods, modulus optimum) and time domain (e.g., optimization based on integral criteria).
- Advanced control loop structures (such as disturbance compensation measures and cascade control) for complex plants.
- Introduction to state feedback control and state estimation for single-input single-output systems.
- Introduction to MATLAB/Simulink for the numerical analysis and design of control systems.
- Motivation for the need to control system, introduction of different control loop structures, and derivation of fundamental requirements for control systems.
- Introduction to system-theoretic concepts as well as established modeling techniques in the time and frequency domains, including symbolic representations for LTI plants and controllers.
- Analysis of control loops to translate fundamental requirements into quantitative specifications for the synthesis of LTI control systems.
- Design of LTI controllers for single-input single-output systems using classical design methods in the frequency domain (e.g., frequency response methods, modulus optimum) and time domain (e.g., optimization based on integral criteria).
- Advanced control loop structures (such as disturbance compensation measures and cascade control) for complex plants.
- Introduction to state feedback control and state estimation for single-input single-output systems.
- Introduction to MATLAB/Simulink for the numerical analysis and design of control systems.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Grundlagen der Regelungstechnik (Fak. V) | Integrated course | 3535 L 018 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Grundlagen der Regelungstechnik (Fak. V) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Completing homework | 10 | 3 h | 30 h |
| Attendance | 15 | 4 h | 60 h |
| Exam preparation | 1 | 30 h | 30 h |
| Preparation/Follow-up | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The integrated course consists of in-person sessions and asynchronous online components. The methods and fundamentals of control engineering taught in the lecture are reinforced and illustrated through practice-oriented examples using both analytical and computer-based exercises.
For this purpose, exercises are assigned that students must initially solve independently as graded homework within the framework of a portfolio assessment, including software implementation where required. These are then further explored and discussed interactively in joint exercise sessions, addressing additional aspects and extensions.
For this purpose, exercises are assigned that students must initially solve independently as graded homework within the framework of a portfolio assessment, including software implementation where required. These are then further explored and discussed interactively in joint exercise sessions, addressing additional aspects and extensions.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic courses in mathematics (in particular differential equations and the Laplace transform), as well as electrical engineering, mechanics, measurement engineering, and sensor technology.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 30 | flexibel | 5 submissions, each 4-5 pages long. |
| Quick test | 10 | written | 10 minutes |
| Final test | 60 | written | 60 minutes |
Exam description
Throughout the semester, homework assignments are completed, contributing a total of 30 points. A midterm test worth 10 points is held during the semester, consisting of short questions on the topics covered up to that point.
The final exam covers all subject areas and is worth 60 points.
The total achievable score is 100 points.
The final exam covers all subject areas and is worth 60 points.
The total achievable score is 100 points.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration is carried out via the ISIS system. Official exam registration must be completed before the first assessment.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
- Dörrscheidt, F. und Latzel, W.: Grundlagen der Regelungstechnik, Springer Vieweg
- Föllinger, Otto: Regelungstechnik - Einführung in die Methoden und ihre Anwendung, VED-Verlag
- Lutz, H. und Wendt, W.: Taschenbuch der Regelungstechnik, Verlag Harri Deutsch
- Unbehauen, Heinz: Regelungstechnik 1, Springer Vieweg
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2026 | 4. Mess- und regelungstechnische Wahlpflichtmodule › 4.1 Regelungstechnik |
| WS 2026/27 | 4. Mess- und regelungstechnische Wahlpflichtmodule › 4.1 Regelungstechnik | |
| Engineering Science StuPO 2020 | SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2026 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5.1 Allgemeine Grundlagen: Regelungstechnik |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule - Regelungstechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen › Elektrotechnik (ET) › Elektrotechnik (Wahlpflicht) |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Automation & Control |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Electrical Engineering › Automation & Control |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Technische Grundlagen › Mess- und Regelungstechnik |
| WS 2026/27 | Wahlpflichtmodule › Technische Grundlagen › Mess- und Regelungstechnik | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| Transport Systems StuPO 2018 | SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.2 Regelungstechnik |
| WS 2026/27 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.2 Regelungstechnik |
Miscellaneous
Not specified