Actuator Technologies and MechatronicsModule description #50707 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50707 / #5 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Maas, Jürgen |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351400 FG Elektromechanische Konstruktionen |
Contact
| Office | EW 3 |
|---|---|
| Contact person | Maas, Jürgen |
| E-mail address | juergen.maas@tu-berlin.de |
| Website | http://www.emk.tu-berlin.de |
Learning outcomes
After successfully completing the module, students are able to:
- describe the operating principles and functionality of established electromagnetic transducers and novel actuators,
- select and design actuators appropriately for mechatronic applications based on their static and dynamic properties,
- integrate and control actuators within mechatronic systems,
- structure mechatronic systems and consider them from a holistic perspective,
- develop mathematical models of simple mechatronic systems and perform optimizations,
- experimentally evaluate and characterize actuators and mechatronic systems.
- describe the operating principles and functionality of established electromagnetic transducers and novel actuators,
- select and design actuators appropriately for mechatronic applications based on their static and dynamic properties,
- integrate and control actuators within mechatronic systems,
- structure mechatronic systems and consider them from a holistic perspective,
- develop mathematical models of simple mechatronic systems and perform optimizations,
- experimentally evaluate and characterize actuators and mechatronic systems.
Content
- Introduction to mechatronics and the basic mechatronic system,
- Definition of fundamental concepts of mechatronics as an interdisciplinary engineering discipline,
- Examination of different actuator principles (in particular the construction and functioning of electromagnetic and electrodynamic transducers such as DC, synchronous, and asynchronous machines, as well as an introduction to actuators based on smart materials),
- Control of the actuators,
- Mathematical description and model-based synthesis of mechatronic systems,
- Introduction to the design and optimization of mechatronic systems.
- Definition of fundamental concepts of mechatronics as an interdisciplinary engineering discipline,
- Examination of different actuator principles (in particular the construction and functioning of electromagnetic and electrodynamic transducers such as DC, synchronous, and asynchronous machines, as well as an introduction to actuators based on smart materials),
- Control of the actuators,
- Mathematical description and model-based synthesis of mechatronic systems,
- Introduction to the design and optimization of mechatronic systems.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Aktorik und Mechatronik | Integrated course | 3535 L 024 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Aktorik und Mechatronik (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Completing homework | 5 | 6 h | 30 h |
| Attendance | 15 | 4 h | 60 h |
| Exam preparation | 1 | 30 h | 30 h |
| Preparation/Follow-up | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The integrated course, consisting of in-person sessions and asynchronous online components, teaches the fundamentals of actuators and mechatronics. These concepts are reinforced and illustrated through practice-oriented examples using analytical and numerical exercises as well as laboratory experiments.
For this purpose, exercises are assigned that students must first complete independently in small groups as graded homework within a portfolio assessment, including software implementation for numerical calculations where required. These exercises are then further explored interactively in group sessions, addressing additional aspects. The graded exercises also serve as preparation for the experiments conducted on the actuator and mechatronic test setups.
For this purpose, exercises are assigned that students must first complete independently in small groups as graded homework within a portfolio assessment, including software implementation for numerical calculations where required. These exercises are then further explored interactively in group sessions, addressing additional aspects. The graded exercises also serve as preparation for the experiments conducted on the actuator and mechatronic test setups.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Mathematical fundamentals
Fundamentals of electrical engineering
Basic modules in mechanics and design
Measurement engineering and sensor technology
Fundamentals of control engineering
Fundamentals of electrical engineering
Basic modules in mechanics and design
Measurement engineering and sensor technology
Fundamentals of control engineering
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 20 | flexibel | 6 h per homework assignment |
| Laboratory and report | 20 | written | each session: 90 min and 2 h |
| Final test | 60 | written | 60 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 60.
Registration procedures
Registration takes place during the first week of lectures via the ISIS system. Official exam registration must be completed before the first assessment.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Es wird ein elektronisches Skript angeboten Hinweis zum elektronischen Skript: https://www.isis.tu-berlin.de
Recommended literature
- Dierk, S.: Elektrische Antriebe - Grundlagen. Springer-Verlag, Berlin. 5. Aufl., 2013.
- Föllinger, Otto: Regelungstechnik - Einführung in die Methoden und ihre Anwendung, VDE-Verlag.
- H. Janocha, H.: Unkonventionelle Aktoren - eine Einführung. Oldenbourg Verlag.
- Isermann, R.: Mechatronische Systeme. Grundlagen. Springer, 2008.
- Janschek, K.: Systementwurf mechatronischer Systeme: Methoden - Modelle - Konzepte. Springer Verlag.
- Stölting, H.-D.; Kallenbach, E.: Handbuch Elektrische Kleinantriebe. Hanser-Verlag 2011.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| Biomedical Engineering StuPO 2018 | WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2026 | 6. Schwerpunkte › 6.2 Mechatronische Systeme |
| WS 2026/27 | 6. Schwerpunkte › 6.2 Mechatronische Systeme | |
| Engineering Science StuPO 2020 | SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2026/27 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| Patent Engineering StuPO 2015 | WS 2026/27 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.1. Konstruktion und Entwicklung |
| Transport Systems StuPO 2018 | SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen |
| WS 2026/27 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen |
Miscellaneous
Not specified