Introduction to Engineering Data AnalyticsModule description #50722 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English, German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #50722 / #7 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Jochem, Roland |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361300 FG Qualitätswissenschaft |
Contact
| Office | PTZ 3 |
|---|---|
| Contact person | Müller-Stein, Lennart Frederik |
| E-mail address | l.mueller-stein@tu-berlin.de |
| Website | https://www.tu.berlin/qw/studium-lehre/lehrveranstaltungen/ida-introduction-to-engineering-data-analytics-with-r |
Learning outcomes
After completing the course, participants will be able to carry out data analyses in the programming language R (winter semester) and Python (summer semester) using statistical methods, interpret the results and document them. Furthermore, the students are able to prepare project results and to present and defend them under practical conditions.
Content
In addition to the basic knowledge of the programming languages R and Python and their interactive development environments RStudio for R and Jupyter Notebooks for Python, the course also teaches the statistical basics of explorative data analysis, random variables and their modeling using distribution functions. Weekly lecture content is deepened in online courses. Following the lectures and exercises, students work in groups on a realistic problem using the gained knowledge and present the results in a final report.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Introduction to Engineering Data Analytics with R | Lecture | 3536 L 329 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Introduction to Engineering Data Analytics with R (Lecture) 1
- Introduction to Engineering Data Analytics with R (Vorlesung) 1. Termingruppe 3536 L 329
Workload and credit points
Introduction to Engineering Data Analytics with R (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time in attendance | 15 | 2 h | 30 h |
| 30 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Work on a case study | 1 | 40 h | 40 h |
| Work on online courses | 15 | 5 h | 75 h |
| Preparation and follow-up | 15 | 2 h | 30 h |
| 145 h | |||
The workload of the module adds up to 175 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of a weekly lecture and interactive e-learning tutorials, in which the module content is deepened. The topics cover all important areas of data analysis. The data analysis process underlying the module can be broken down as follows:
Description of the course content in the winter semester:
1. Lecture: Introduction to Data Science, R, RStudio, and RMarkdown
2. Lecture: Structure of the data analysis process and data import
3. Lecture: Data import from databases and the web
4. Lecture: Data preparation with tidyr
5. Lecture: Data transformation with dplyr
6. Lecture: Data merging with dplyr
7. Lecture: Programming in R
8. Lecture: Data visualization with ggplot2
9. Lecture: Data visualization with Plotly
10. Lecture: Introduction to Shiny
11. Lecture: Shiny web applications with HTML, CSS, and JavaScript
12. Lecture: Data modeling - linear regression
13. Lecture: Data modeling - introduction to machine learning
14. Lecture: Presentation of the case study
Description of the course content in the summer semester:
1. Lecture: Introduction to Quality Data & Engineering in Python
2. Lecture: Handling Data with Pandas & NumPy
3. Lecture: Import from Databases
4. Lecture: Data Manipulation with Pandas
5. Lecture: Data Cleaning and Preparation
6. Lecture: Data Aggregation and GroupBy
7. Lecture: Visual Data Analysis
8. Lecture: Interactive Visualizations - Plotly
9. Lecture: Python Programming for Data Analytics (OOP)
10. Lecture: Statistical Foundations for Analytics
11. Lecture: Classification and Clustering
12. Lecture: Web Applications - Dash
13. Lecture: Web Applications - Streamlit
14. Lecture: Information about the case studies
Description of the course content in the winter semester:
1. Lecture: Introduction to Data Science, R, RStudio, and RMarkdown
2. Lecture: Structure of the data analysis process and data import
3. Lecture: Data import from databases and the web
4. Lecture: Data preparation with tidyr
5. Lecture: Data transformation with dplyr
6. Lecture: Data merging with dplyr
7. Lecture: Programming in R
8. Lecture: Data visualization with ggplot2
9. Lecture: Data visualization with Plotly
10. Lecture: Introduction to Shiny
11. Lecture: Shiny web applications with HTML, CSS, and JavaScript
12. Lecture: Data modeling - linear regression
13. Lecture: Data modeling - introduction to machine learning
14. Lecture: Presentation of the case study
Description of the course content in the summer semester:
1. Lecture: Introduction to Quality Data & Engineering in Python
2. Lecture: Handling Data with Pandas & NumPy
3. Lecture: Import from Databases
4. Lecture: Data Manipulation with Pandas
5. Lecture: Data Cleaning and Preparation
6. Lecture: Data Aggregation and GroupBy
7. Lecture: Visual Data Analysis
8. Lecture: Interactive Visualizations - Plotly
9. Lecture: Python Programming for Data Analytics (OOP)
10. Lecture: Statistical Foundations for Analytics
11. Lecture: Classification and Clustering
12. Lecture: Web Applications - Dash
13. Lecture: Web Applications - Streamlit
14. Lecture: Information about the case studies
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of statistical software (R or Python), as well as basic knowledge of mathematics and probability calculus (in each case high school knowledge) are desirable, but not mandatory.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Work on online courses | 40 | flexibel | Submission |
| Processing and documentation of the case study | 60 | flexibel | Submission |
Exam description
The form of examination for this module is the portfolio examination.
For this purpose, the partial tasks listed below with corresponding weighting must be completed.
E-Learning online courses - 40 out of 100 points
Processing and documentation of case study - 60 out of 100 points
For this purpose, the partial tasks listed below with corresponding weighting must be completed.
E-Learning online courses - 40 out of 100 points
Processing and documentation of case study - 60 out of 100 points
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the entire module is done via MOSES.
If a MOSES registration is not possible (reasons: e.g. diploma) a timely registration has to be made via the Examination Office.
If a MOSES registration is not possible (reasons: e.g. diploma) a timely registration has to be made via the Examination Office.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- D. Wollschläger, Grundlagen der Datenanalyse mit R: Eine anwendungsorientierte Einführung. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. doi: 10.1007/978-3-662-61736-6.
- H. Wickham, M. Çetinkaya-Rundel, und G. Grolemund, R for data science: import, tidy, transform, visualize, and model data, 2nd edition. Beijing Boston Farnham Sebastopol Tokyo: O’Reilly, 2023. Online verfügbar unter: https://r4ds.hadley.nz/
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2025 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| WS 2025/26 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| SS 2026 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 5. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.5 Informationstechnik |
| WS 2025/26 | 5. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.5 Informationstechnik | |
| SS 2026 | 5. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.5 Informationstechnik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule |
| WS 2025/26 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule | |
| SS 2026 | 04. Grundlagen Wahlpflicht › Wahlpflichtmodule | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich |
| WS 2025/26 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| SS 2026 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich |
| WS 2025/26 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| SS 2026 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen |
| WS 2025/26 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen | |
| SS 2026 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5 Allgemeine Grundlagen | |
| Erneuerbare Energien und Verfahrenstechnik StuPO 2025 | WS 2025/26 | Wahlpflichtbereich › Data Science › Methodik |
| SS 2026 | Wahlpflichtbereich › Data Science › Methodik | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2025 | Integrationsbereich › Integrationsbereich (Wahlpflicht) |
| WS 2025/26 | Integrationsbereich › Integrationsbereich (Wahlpflicht) | |
| SS 2026 | Integrationsbereich › Integrationsbereich (Wahlpflicht) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Statistics & Econometrics |
| WS 2025/26 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Statistics & Econometrics | |
| SS 2026 | Integrationsbereich/Integration › Integrationsbereich/Integration (Wahlpflicht/Compulsory-Elective) › Statistics & Econometrics | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung |
| WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Informationstechnische und rechnerunterstützte Modellierung | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| Natural Sciences in the Information Society StuPO 2018 | SS 2025 | Wahlpflichtbereich › Informatik › Grundlagenmodule |
| WS 2025/26 | Wahlpflichtbereich › Informatik › Grundlagenmodule | |
| SS 2026 | Wahlpflichtbereich › Informatik › Grundlagenmodule | |
| Natural Sciences in the Information Society Natural Sciences in the Information Society (B. Sc.) - StuPO 2025 | WS 2025/26 | Wahlpflichtbereich › Wahlpflichtbereich Informatik › Grundlagenmodule Informatik |
| SS 2026 | Wahlpflichtbereich › Wahlpflichtbereich Informatik › Grundlagenmodule Informatik | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 3. Informationstechnik |
| WS 2025/26 | 4. Profilmodule › 4.2 Automatisierungs- und Informationstechnik | |
| SS 2026 | 3. Informationstechnik | |
| Regenerative Energy Systems StuPO 2023 | SS 2025 | Wahlpflichtmodule › Computational Methods |
| WS 2025/26 | Wahlpflichtmodule › Computational Methods | |
| SS 2026 | Wahlpflichtmodule › Computational Methods | |
| Transport Systems StuPO 2018 | SS 2025 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen |
| WS 2025/26 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen | |
| SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3.1 Informationstechnische Grundlagen |
Miscellaneous
Not specified