Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Noise ControlModule description #51000 / Version 2

← Module page Deutsche Fassung
Module / Version#51000 / #2
ValiditySince Summer semester 2025
Available language(s)English, German
Credit points6
Person responsible for the moduleSarradj, Ennes
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Strömungsmechanik und Technische Akustik
Academic chair35311500 FG Technische Akustik

Contact

OfficeTA 7
Contact personSarradj, Ennes
E-mail addressennes.sarradj@tu-berlin.de
WebsiteNot specified

Learning outcomes

Students: - have basic knowledge of sound propagation and sound generation - have basic knowledge of the perception of noise and measurement parameters for characterizing noise - have knowledge of the scientific principles of technical noise reduction - have mastered the basic rules of low-noise design - are able to design and implement simple technical noise reduction measures

Content

The lecture deals with various technical measures for noise reduction. As a basis, an introduction to simple basics of sound fields and sound sources, perception and measurement of sound is given. Specifically, the following contents are dealt with: - Introduction to acoustics - Principles of noise reduction - Measures for noise reduction at the source - Measures for noise reduction on the propagation path In the calculation exercise, the knowledge imparted in the lecture is applied to practically relevant tasks.

Module components

mandatory

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
LärmminderungExercise0531 L 613 Summer semester[de]2 ISIS
LärmminderungLecture0531 L 611 Summer semester[de]2 ISIS

Workload and credit points

Lärmminderung (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Lärmminderung (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

In the lecture, most of the content is presented on the blackboard and illustrated using small demonstration experiments and other materials. In the calculation exercise, the independent application of the knowledge taught to practical, relevant tasks is encouraged, thus promoting the cognitive process through the students' own engagement with the content. The homework assignments, which are completed in small groups, also contribute to this.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

knowledge of differential calculus

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageEnglish, German
Duration/Extentapprox. 20-30 min

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

x

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Automotive Systems
Automotive Systems (M. Sc.) - StuPO 2017
SS 2025Wahlpflichtbereich
WS 2025/26Wahlpflichtbereich
SS 2026Wahlpflichtbereich
WS 2026/27Wahlpflichtbereich
Biomedical Engineering
StuPO 2018
SS 20252. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
WS 2025/262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
SS 20262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
WS 2026/272. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
Building Energy Engineering
Building Energy Engineering (M. Sc.) - StuPO 2024
SS 2025Vertiefung Energietechnik
WS 2025/26Vertiefung Energietechnik
SS 2026Vertiefung Energietechnik
WS 2026/27Vertiefung Energietechnik
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
SS 20256. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer
WS 2025/266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer
SS 20266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer
WS 2026/276. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.3 Produktorientierte Fächer
Energy Engineering and Process Engineering
StuPO 2014
SS 2025Wahlpflicht für den Master GES › Wahlpflicht
WS 2025/26Wahlpflicht für den Master GES › Wahlpflicht
SS 2026Wahlpflicht für den Master GES › Wahlpflicht
WS 2026/27Wahlpflicht für den Master GES › Wahlpflicht
Engineering Science
StuPO 09.01.2012
SS 202506. Schwerpunkte › 6.6 Technische Akustik
WS 2025/2606. Schwerpunkte › 6.6 Technische Akustik
SS 202606. Schwerpunkte › 6.6 Technische Akustik
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.6 Technische Akustik › 2.6a Kernbereich
WS 2025/262.6 Technische Akustik › 2.6a Kernbereich
SS 20262.6 Technische Akustik › 2.6a Kernbereich
Engineering Science
StuPO 2020
SS 20252.6 Technische Akustik › 2.6a Kernbereich
WS 2025/262.6 Technische Akustik › 2.6a Kernbereich
SS 20262.6 Technische Akustik › 2.6a Kernbereich
WS 2026/272.6 Technische Akustik › 2.6a Kernbereich
Engineering Science
StuPO 2020
SS 2025Wahlpflichtmodule › 6. Schwerpunkte › 6.6 Technische Akustik
WS 2025/26Wahlpflichtmodule › 6. Schwerpunkte › 6.6 Technische Akustik
SS 2026Wahlpflichtmodule › 6. Schwerpunkte › 6.6 Technische Akustik
WS 2026/27Wahlpflichtmodule › 6. Schwerpunkte › 6.6 Technische Akustik
Erneuerbare Energien und Verfahrenstechnik
StuPO 2025
WS 2025/26Wahlpflichtbereich › Fachspezifische Wahlpflicht
SS 2026Wahlpflichtbereich › Fachspezifische Wahlpflicht
WS 2026/27Wahlpflichtbereich › Fachspezifische Wahlpflicht
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Design & Operations
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Design & Operations
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Design & Operations
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Design & Operations
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Transportation Engineering › Design & Operations
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Maschinen- und Anlagentechnik
WS 2025/26Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Maschinen- und Anlagentechnik
SS 2026Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Maschinen- und Anlagentechnik
WS 2026/27Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Maschinen- und Anlagentechnik
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Produkte
WS 2025/26Wahlpflichtmodule › Profilmodule › Produkte
SS 2026Wahlpflichtmodule › Profilmodule › Produkte
WS 2026/27Wahlpflichtmodule › Profilmodule › Produkte
Transport Systems
StuPO 2018
SS 2025A. Grundlagen › 2. Wahlpflichtbereich › 2.2 Technisch-naturwissenschaftliche Grundlagen
WS 2025/26A. Grundlagen › 2. Wahlpflichtbereich › 2.2 Technisch-naturwissenschaftliche Grundlagen
SS 2026A. Grundlagen › 2. Wahlpflichtbereich › 2.2 Technisch-naturwissenschaftliche Grundlagen
WS 2026/27A. Grundlagen › 2. Wahlpflichtbereich › 2.2 Technisch-naturwissenschaftliche Grundlagen
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified