Aeroelasticity IModule description #51061 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #51061 / #2 |
|---|---|
| Validity | Since Winter semester 2023/24 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Krüger, Wolf |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Luft- und Raumfahrt |
| Academic chair | 35341400 FG Flugmechanik und Flugregelung |
Contact
| Office | F 5 |
|---|---|
| Contact person | Gonzalez Ramirez, Pedro Jose |
| E-mail address | p.gonzalez.ramirez@tu-berllin.de |
| Website | http://tu.berlin/fmra |
Learning outcomes
After successfully passing the module, students will have a theoretical and experimental foundation in aeroelasticity. The theoretical foundation is laid in the lecture. The practical application with numerical calculation procedures and experimental methods is taught in the exercise.
The following knowledge is imparted: Overview of the variety of aeroelastic problems, understanding of the basic physical relationships in aeroelasticity, aeroelastic vibration tests (static vibration test, excitation in flight test), special requirements of modeling flexible aircraft, modal decoupling of multi degree of freedom systems, measurement techniques in aeroelasticity.
Skills taught include: Analytical treatment of aeroelastic problems, use of commercial FEM software (Nastran, Abaqus or similar), commercial measurement software (LMS Test Xpress) and commercial software for modal analysis (LMS Modal Analysis Lite), and programming of Matlab scripts for 2D and 3D flutter analysis.
As methodological competence, the planning of the execution and evaluation of aeroelastic vibration tests as well as the execution of aeroelastic stability analyses are taught.
The following knowledge is imparted: Overview of the variety of aeroelastic problems, understanding of the basic physical relationships in aeroelasticity, aeroelastic vibration tests (static vibration test, excitation in flight test), special requirements of modeling flexible aircraft, modal decoupling of multi degree of freedom systems, measurement techniques in aeroelasticity.
Skills taught include: Analytical treatment of aeroelastic problems, use of commercial FEM software (Nastran, Abaqus or similar), commercial measurement software (LMS Test Xpress) and commercial software for modal analysis (LMS Modal Analysis Lite), and programming of Matlab scripts for 2D and 3D flutter analysis.
As methodological competence, the planning of the execution and evaluation of aeroelastic vibration tests as well as the execution of aeroelastic stability analyses are taught.
Content
In the lecture, the mutual interactions of the elastic aircraft structure and aerodynamic forces are described and studied. Aeroelastic phenomena can lead to an impairment of the controllability of the aircraft, to high loads or even the fracture of the wing. A distinction is made between static and dynamic aeroelastic phenomena, such as static divergence (buckling of a wing at too high a speed) and rudder reversal, i.e., the reduction (or even reversal) of rudder effectiveness at high approach speeds, and dynamic flutter, i.e., self-reinforcing oscillations of the wing and rudders that can have effects up to and including breakage of the wing. Particular attention is given to the following: Aeroelastic triangle, torsional divergence, aileron effectiveness, flow-structure coupling. In the practical part, an introduction to aeroelastic vibration tests is given. Afterwards, basics of vibration theory will be repeated or deepened. The concept of modal decoupling is introduced and the fundamentals of modal analysis are taught. Since the modal analysis of structures is usually performed in advance of experiments using the finite element method, the basic idea of this numerical method is explained and illustrated with examples from aeroelasticity. In addition, an introduction to the measurement technique in general and in aeroelasticity in particular is given. The modeling of transient aerodynamics will be explained and the basics of flutter calculation will be introduced (stability analysis). In the practical part of the module, students will determine the modal parameters and eigenmodes of the Garteuer structure. The modal analysis is to be performed by the students using a commercial FEM software and with the help of a static vibration test. The practical part concludes with a numerical flutter analysis, the results of which are verified experimentally in the wind tunnel.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Aeroelastik I: Grundlagen der Aeroelastik | Lecture | 3534 L 518 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Aeroelastisches Praktikum | Project | 3534 L 867 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Aeroelastik I: Grundlagen der Aeroelastik (Lecture) 1
- Aeroelastik I: Grundlagen der Aeroelastik (Vorlesung) 1. Termingruppe 3534 L 518
Aeroelastisches Praktikum (Project) 1
- Aeroelastisches Praktikum (Projekt) 1. Termingruppe 3534 L 867
Workload and credit points
Aeroelastik I: Grundlagen der Aeroelastik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Aeroelastisches Praktikum (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Die Lehrveranstaltung Aeroelastik I findet als Frontalunterricht statt. Die Bestandteile der Lehrveranstaltung Aeroelastisches Praktikum werden in Vorlesungen, gemeinsamen Gruppenübungen und selbstständigen Kleingruppenübungen durchgeführt.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Statik und Elementare Festigkeitslehre; Kinematik und Dynamik; Aerodynamik I
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Mündliche Rücksprache | 50 | oral | 20 min |
| Präsentation | 25 | oral | 20 min |
| Projekt Bericht | 25 | practical | Bearbeitungszeit über das gesamte Semester |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Anmeldung zur Prüfung:
- für die Anerkennung als prüfungsäquivalente Studienleistung im Prüfungsamt/MTS.
- die jeweiligen Anmeldefristen sind der Studienordnung zu entnehmen.
- Informationen zur Anmeldung werden in der 1. Übung bekanntgegeben
- für die Anerkennung als prüfungsäquivalente Studienleistung im Prüfungsamt/MTS.
- die jeweiligen Anmeldefristen sind der Studienordnung zu entnehmen.
- Informationen zur Anmeldung werden in der 1. Übung bekanntgegeben
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Försching: Grundlagen der Aeroelastik, Berlin: Springer, 1974
- Jan Robert Wright, Jonathan Edward Cooper: Introduction to Aircraft Aeroelasticity and Loads, West Sussex: Wiley Verlag, 2007
- Robert Gasch; Klaus Knothe ; Robert Liebich: Strukturdynamik : Diskrete Systeme und Kontinua, 2. Auflage, Berlin: Springer, 2012
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 3. Profilmodule › 3.5 Flugmechanik |
| WS 2025/26 | 3. Profilmodule › 3.5 Flugmechanik | |
| SS 2026 | 3. Profilmodule › 3.5 Flugmechanik | |
| WS 2026/27 | 3. Profilmodule › 3.5 Flugmechanik | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| Transport Systems StuPO 2018 | SS 2025 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich |
| WS 2025/26 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich | |
| SS 2026 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich | |
| WS 2026/27 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich |
Miscellaneous
Not specified