Structural MechanicsModule description #51190 / Version 2
- 6 CP
- Oral exam
- Graded
- Summer semester
- German
| Module / Version | #51190 / #2 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Klinge, Sandra |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35371300 FG Mechanik, insbes. Strukturmechanik |
Contact
| Office | C 8-3 |
|---|---|
| Contact person | Happ, Anke |
| E-mail address | anke.happ@tu-berlin.de |
| Website | https://www.smb.tu-berlin.de/menue/studium_und_lehre/hoehere_mechanik/strukturmechanik_i_und_ii/ |
Learning outcomes
Knowledge:
- Fundamentals of stress-oriented design (pre-development, design phase, usual verifications)
- on structural idealisation in modelling
- on energy principles as a basis for numerical methods
- about some numerical methods
- on the evaluation of the structural behaviour of thin-walled structures including the stability of structures
- on the fundamentals of dynamic structural behaviour
Skills:
- appropriate modelling of thin-walled structures
- Evaluation of complex numerical solutions through knowledge of "classical" structural modelling for thin-walled structures
- Calculation of structures modelled with plates and membrane shells
- Numerical solution of strength and stability problems
- Fundamentals of stress-oriented design (pre-development, design phase, usual verifications)
- on structural idealisation in modelling
- on energy principles as a basis for numerical methods
- about some numerical methods
- on the evaluation of the structural behaviour of thin-walled structures including the stability of structures
- on the fundamentals of dynamic structural behaviour
Skills:
- appropriate modelling of thin-walled structures
- Evaluation of complex numerical solutions through knowledge of "classical" structural modelling for thin-walled structures
- Calculation of structures modelled with plates and membrane shells
- Numerical solution of strength and stability problems
Content
- Stress tensor, distortion tensor, principal stresses, 3D equilibrium equations, plane stress state, plane distortion state.
- Fundamentals of modelling for the design calculation and analysis of thin-walled structures - Lightweight structures for aerospace engineering, vehicle construction, shipbuilding and maritime engineering, mechanical engineering, materials handling technology, steel construction.
aerospace engineering, vehicle construction, ship and marine engineering, mechanical engineering, materials handling, steel construction and production engineering
- Thin-walled structures - beam structures, trusses, bending of thin plates, membrane shells,
- Application of energy principles, the principle of virtual work, equilibrium consideration with the minimum principle of elastic potential, deformation and supplementary work of elastic structures and application of the
1st and 2nd theorem of Castigliano
- Fundamentals of numerical methods for solving strength and stability problems - Ritz method, FEM
- Stability problem, understanding and definition of the problem, pre-stress effects
- Basic problems of structural dynamics - modal analysis, structural damping, transient structural response
- Fundamentals of modelling for the design calculation and analysis of thin-walled structures - Lightweight structures for aerospace engineering, vehicle construction, shipbuilding and maritime engineering, mechanical engineering, materials handling technology, steel construction.
aerospace engineering, vehicle construction, ship and marine engineering, mechanical engineering, materials handling, steel construction and production engineering
- Thin-walled structures - beam structures, trusses, bending of thin plates, membrane shells,
- Application of energy principles, the principle of virtual work, equilibrium consideration with the minimum principle of elastic potential, deformation and supplementary work of elastic structures and application of the
1st and 2nd theorem of Castigliano
- Fundamentals of numerical methods for solving strength and stability problems - Ritz method, FEM
- Stability problem, understanding and definition of the problem, pre-stress effects
- Basic problems of structural dynamics - modal analysis, structural damping, transient structural response
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Strukturmechanik | Lecture | 0530 L 277 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Strukturmechanik | Exercise | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Strukturmechanik (Lecture) 1
- Strukturmechanik (Vorlesung) Termingruppe 1 0530 L 277
Strukturmechanik (Exercise) 1
- Strukturmechanik (Übung) Termingruppe 1
Workload and credit points
Strukturmechanik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Strukturmechanik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lecture with examples and programme applications,
detailed calculation examples in the exercise,
detailed calculation examples in the exercise,
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
The examination requirements could not be retrieved.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | German |
| Duration/Extent | ca. 30 Min. |
Exam description
mündliche Prüfung
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 100.
Registration procedures
no registration formalities
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – ISIS
Recommended literature
- C.F. Kollbrunner / M. Meister: Knicken, Biegedrillknicken, Kippen. Springer-Verlag, 1961
- D. Gross / W. Hauger / W. Schnell / P. Wriggers: Technische Mechanik 4. Springer, 2004
- H. Göldner: Lehrbuch Höhere Festigkeitslehre. Band 1. Fachbuchverlag Leipzig. 1991
- H. Göldner: Lehrbuch Höhere Festigkeitslehre. Band 2. Fachbuchverlag Leipzig-Köln. 1992
- N.A. Alfutov: Stability of Elastic Structures. Springer, 2004
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2026 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau |
| WS 2026/27 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2026 | 5. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.2 Mechanik |
| WS 2026/27 | 5. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.2 Mechanik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung | |
| Engineering Science StuPO 09.01.2012 | SS 2026 | 06. Schwerpunkte › 6.4 Festkörpermechanik |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2026 | 2.4 Festkörpermechanik › 2.4a Kernbereich |
| Engineering Science StuPO 2020 | SS 2026 | 2.4 Festkörpermechanik › 2.4a Kernbereich |
| WS 2026/27 | 2.4 Festkörpermechanik › 2.4a Kernbereich | |
| Engineering Science StuPO 2020 | SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| Naval Architecture and Ocean Engineering StuPo 2017 | SS 2026 | 1. Kernmodule › 1.3 Strukturanalyse |
| WS 2026/27 | 1. Kernmodule › 1.3 Strukturanalyse | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2026 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik |
| WS 2026/27 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2026 | Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Festkörpermechanik |
| WS 2026/27 | Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Festkörpermechanik | |
| Vehicle Engineering StuPO 2017 | SS 2026 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
| WS 2026/27 | 2. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden |
Miscellaneous
Not specified